Smoke & Carbon Detectors

The Kidde 10LLCO Carbon Monoxide Alarm is a sleek, lightweight carbon monoxide (CO) alarm with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning that the battery will not have to be changed for the duration of the alarms life.

The alarm has a unique water-based Kidde CO Electrochemical Sensor and features an alarm memory, meaning that a red LED will flash every 60 seconds to indicate a CO event has occurred.

A CO Quick-Test feature temporarily desensitises the CO sensor to allow quick-testing using approved CO sprays. An interrogation feature allows peak level, test history to be analysed by Kidde upon arrangement. The alarm has 3 LEDs - alarm, operate and fault. Its end-of-life alarm alerts the user to replace the alarm. A test/reset button allows regular testing of the alarm function.

This slim, easy-to-use alarm is ideal for use in all living areas and can be installed on a wall or ceiling or used free-standing on a table or shelf. It is also easily portable so can be taken away on holidays.

BSI Certified to EN52091-1.
CE Tested & Certified.

PTDKID10LLCO

The Kidde 10Y29 Photoelectric Alarm is a state of the art optical smoke alarm, designed for easy installation and a guaranteed 10 years life. No need to change batteries, power source lasts units life-span.

The Optical Photoelectric sensor is highly efficient at detecting slow burning and smouldering fires, such as furniture. The small diameter of the smoke alarm (just 104mm) reduces its storage space needs.

The Kidde 10Y29 alarm features an innovative early and silent low battery warning. This means that rather than chirping and beeping, an LED light will flash at the early signs of the battery running out. After 30 days, the alarm will then start chirping for 30 more days to indicate the end of life. This silent alert feature will be a real benefit when low ambient temperatures occur, as this decreases the batterys temperature and therefore voltage. This typically occurs during the early hours of the night, and therefore this silent feature will prevent annoying beeping at unsociable hours.

The 10Y29 alarm has a reduced sounder output when initially pressing the test button. During an alarm, the sounder produces a loud, 85dB warning. However, to protect the ears, for the first 4 seconds that the Test Button is pressed a reduced level sound will be emitted.

The alarm has a high performance, tamperproof battery which is not activated until the alarm is mounted on the base plate. This preserves freshness and ensures a long term performance. To minimise nuisance alarms, the smoke alarm has a bug screen. The large central test/hush button is easy to operate.

Supplied with: Fixings & Screws, Separate Base Plate & Owners manual.

PTDKID10Y29

The Kidde 5COLSB Carbon Monoxide Alarm continuously monitors for the presence of deadly carbon monoxide (CO) in the home, providing a constant protection against the effects of this deadly gas. The 5CO features two LEDs - The red LED illuminates when the alarm has detected CO in the atmosphere and the green LED confirms that DC power is present.

The alarm can either be installed on a wall or just placed on a tabletop or shelf for added convenience. It is also ideal for use when on holiday and in rented accommodation. The Lifesaver 5CO features a 7 year sensor life with an end of life warning to replace the unit after seven years protection.

PTDKID5COLSB

The Kidde KID7COC Carbon Monoxide Alarm continuously monitors for the presence of deadly carbon monoxide (CO) in the home, providing a constant protection against its effects. The 7CO features two LEDs. Red illuminates when the alarm has detected CO in the atmosphere and green confirms that DC power is present. The alarm can either be installed on a wall or just placed on a tabletop or shelf for added convenience. It is also ideal for use when on holiday, in rented accommodation or for use in caravans and boats and complies with the very latest EN50291.2010 standards, Parts 1 & 2 (boats and caravans).

The Kidde 7CO Carbon Monoxide alarm features an industry leading 10 year sensor life, meaning that it lasts 40% longer than any other CO alarm. The alarm has an end of life warning to replace the unit after ten years protection.

PTDKID7COC

The Kidde KID7DCOC continuously monitors for the presence of deadly carbon monoxide (CO) in the home providing a constant protection against its effects. As well as twin red and green LEDs, the 7DCO features a digital display that continuously displays CO levels detected. The alarm can either be installed on a wall or just placed on a tabletop or shelf for added convenience. It is also ideal for use when on holiday, in rented accommodation, or for use in caravans and boats and complies with the very latest EN50291.2010 standards, Parts 1 & 2 (boats and caravans).

The Kidde 7DCO Carbon Monoxide Alarm features an industry leading 10 year sensor life, meaning it lasts 40% longer than any other CO alarm. The alarm has an end of life warning to replace the unit after ten years protection.

PTDKID7DCOC

The Yale Security Easy Fit Smoke Detector is suitable for connection to Easy Fit alarm systems. It will activate the house alarm in the event of a fire. It also has a built-in siren that sounds on the device when smoke is detected.

The smoke detector is easy to fit and includes a test button for range testing.

Radio: 868MHz FM.

The pack contains:

1 x Smoke detector (with bracket).
2 x Wall plugs and screws.
3 x AA Alkaline batteries.

PTDYEFSD

The Kidde 10SCO is a battery-powered combination alarm that offers protection from the dual dangers of smoke and carbon monoxide (CO) in a single unit for convenience. Its voice alarm feature audibly announces which danger has been detected.

The alarm has a peak level memory, which provides notification (voice and LED) when dangerous CO levels have been previously detected. Its front loading battery compartment makes changing the battery easy and convenient.

The 10SCO has a Hush button to temporarily silence nuisance alarms. It also has a test/reset button to allow regular testing of the alarm function.

Designed to be wall or ceiling mounted, this battery-powered unit is perfect for when space is limited but protection is paramount. It can be used in most locations throughout the home.

BSI certified to EN14604:2005 (Smoke).
BSI certified to EN50291-1:2010 (Carbon monoxide).
CE tested and certified.

PTDKID10SCO

The Kidde KID10LLDCO 10LLDCO Alarm is a sleek, lightweight carbon monoxide (CO) alarm with a non-replaceable, sealed-in Lithium battery which provides 10 years of continuous protection, meaning that the battery never needs to be changed for the duration of the alarms life.

The alarm has a digital display which clearly shows the levels of carbon monoxide. A peak level display allows the highest CO level recorded (between 11 - 999ppm) to be displayed. The 10LLDCO has a unique, water-based Kidde CO Electrochemical Sensor. It features a CO Quick-Test feature that allows the alarm to be temporarily desensitised to allow quick testing using approved CO spray.

The alarms interrogation feature allows peak level and test history to be analysed by Kidde upon arrangement. It has 3 LEDs - alarm, operate and fault, and an end-of-life warning that alerts the user when to replace the alarm. A test/reset button allows regular testing of the alarm function.

This slim, easy-to-use alarm is ideal for use in all living areas and can be installed on the wall, where the digital display can easily be seen, or used free-standing on a table or shelf. It is also conveniently portable, so can be taken away on holidays for added peace of mind.

BSI Certified to EN52091-1.
CE Tested & Certified.

PTDKID10LLDCO

The Kidde 4MCO Professional Mains Carbon Monoxide Alarm has a slim line design and a sealed in rechargeable Lithium-Ion battery backup. The alarm has a test/reset button, and can be interconnected to Kidde K10C, K20C and K30C Professional Series mains smoke and heat alarms. Suitable for wall or ceiling mounting.

Please note: The alarm must be fitted by a qualified electrician.

PTDKID4MCO

The Kidde Professional Series 230 Volt Carbon Monoxide Alarm has an LCD Display showing the peak level of CO detected. The alarm has a memory to store the peak level and has a sealed-in, rechargeable Lithium-ion battery for backup.

The alarm has a test/reset button and can be interconnected to Kidde K10C, K20C and K30C Professional Series mains smoke and heat alarms. Suitable for wall or ceiling mounting.

Please note: This alarm must be fitted by a qualified electrician.

PTDKID4MDCO

The Kidde K10C Professional Series alarms can interlink with up to 24 interconnectable alarms, which means that all alarms will sound if any detect smoke or heat. Detects invisible fire particles associated with fast flaming fires. It is 230 volt mains powered, with a battery back-up in the event of a power failure. A Hush button allows temporary silencing of nuisance alarms caused by cooking or steam and resets automatically. In addition, this button is used check the alarm operation.

The alarm has an impressive sound rating of 85 decibel at 3 metres.

Conforms to EN:4604:2005.

PTDKIDK10C

The Kidde K20C Professional Series Alarms can interlink with up to 23 interconnectible alarms, which means that all alarms will sound if any detect smoke or heat. Detects visible fire particles associated with slow smouldering fires. It is 230 volt mains powered, with a battery back-up in the event of a power failure. A Hush button allows temporary silencing of nuisance alarms caused by cooking or steam and resets automatically.

In addition, this button is used to check the alarm operation. A lock-out feature prevents the alarm from being attached/fitted unless the back-up battery is installed. The alarm has an impressive sound rating of 85 decibel at 3 metres. For convenience, it has a front-loading battery door to allow the battery to be changed without removing the alarm.

PTDKIDK20C

The Kidde Professional Series alarms can interlink with up to 23 interconnectible alarms, which means that all alarms will sound if any detect smoke or heat.

This K30C Alarm detects heat of above 58C (Class A2) and is recommended to be used in conjunction with interconnected smoke alarms. It is 230 volt mains powered, with a battery back-up in the event of a power failure. A Hush button allows temporary silencing of nuisance alarms caused by cooking or steam and resets automatically. In addition, this button is used to check the alarm operation. A lock-out feature prevents the alarm from being attached/fitted unless the back-up battery is installed.

The alarm has an impressive sound rating of 85 decibel at 3 metres. For convenience, it has a front-loading battery door to allow the battery to be changed without removing the alarm.

Technical specification:
Model: K30C
Heat detection: 58C
Power Supply: 230v mains-powered with 9V Alkaline battery back-up
Temperature range: 0 to 40 degrees centigrade
Humidity range: Up to 93% Relative Humidity (RH) non-condensing
Alarm: 85 decibels.
Kite marked to BS5446 part 2: 2003
CE tested and certified

PTDKIDK30C

The Arctic Hayes Smoke Alarm Tester Spray is simple and easy-to-use. Designed to test the sensor in smoke alarms, as recommended by the fire brigade.

Offers up to 40 tests per can.

PTDARCPH043A

The Arctic Hayes Carbon Monoxide Alarm Tester Spray is simple and easy-to-use. Designed to test all carbon monoxide alarms and flue gas analysers, as recommended by the fire brigade.

Offers up to 7 tests per can.

PTDARCPHCO520