Personal Protection Equipment

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Helmet Weight: 340g.

1 x Scan Safety Helmet Blue

PTDSCAPPESHB

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Helmet Weight: 340g.

1 x Scan Safety Helmet Red

PTDSCAPPESHR

Scan Safety Helmets are essential for site workers and the safety requirements of workers needing protection from falling objects or striking against fixed obstacles. Manufactured from high density polyethylene and featuring a rain gutter and a six-point polyethylene harness adjustable from 530mm-630mm.

Conforms to EN397:2012 + A1:2012.

Helmet Weight: 340g.

1 x Scan Safety Helmet Yellow

PTDSCAPPESHY

Moulded comfort masks reduce discomfort caused by coarse particles. For garden, garage cleaning and other domestic jobs. Lightweight, disposable and comfortable to wear. Elasticated retaining straps. Non PPE respiratory item.

WARNING
This mask (like all comfort and hygiene masks) is NOT a respiratory protective device and SHOULD ONLY be used to reduce discomfort caused by exposure to coarse, non-toxic particles. They may also be used to protect the work piece from the exhaled breath of the wearer.

Supplied as pack of 10 or box of 50.

The SCAPPEHYG10 Moulded Disposable Comfort Masks are supplied in a pack of 10.

PTDSCAPPEHYG10

Moulded comfort masks reduce discomfort caused by coarse particles. For garden, garage cleaning and other domestic jobs. Lightweight, disposable and comfortable to wear. Elasticated retaining straps. Non PPE respiratory item.

WARNING
This mask (like all comfort and hygiene masks) is NOT a respiratory protective device and SHOULD ONLY be used to reduce discomfort caused by exposure to coarse, non-toxic particles. They may also be used to protect the work piece from the exhaled breath of the wearer.

Supplied as pack of 10 or box of 50.

The SCAPPEHYG50 Moulded Disposable Comfort Masks are supplied in a box of 50.

PTDSCAPPEHYG50

The Moldex Smart Pocket FFP2 NR D Valved Masks have a foldable design with all the features of a traditional Moldex cup mask. DuraMesh structure for optimum shape retention and durability.

Ideally suited to lighter industries, where the mask is carried between use, or industries with hygiene implications. ActivForm Seal automatically adjusts to different face shapes and the Ventex valve: reduces moisture and heat, keeping the mask as cool as possible.

Masks are individually sealed.

FFP2 NR D for protection against toxic dusts, mists and fumes based on water and oil, including harmful and carcinogenic dusts, fumes and aerosols.
10 x Workplace exposure limit. FFP2 NR D EN149:2001 + A1:2009.

PTDMOL2475

The Moldex Smart Solo Valved Masks, even when wearing large gloves, the single strap makes putting the mask on and taking it off, quick simple and safe.

It has a DuraMesh structure for optimum shape retention and durability with a ActivForm Seal automatically adjusts to different face shapes, nose seal: increases fit and comfort. Ventex valve: reduces moisture and heat, keeping the mask as cool as possible.

FFP2 NR D for protection against toxic dusts, mists and fumes based on water and oil.
10 x Workplace exposure limit.
EN149:2001 + A1:2009.

Supplied in a box of 20.

PTDMOL2495

These Scan Classic Spectacles offer protection against low energy, high speed impacts of up to 45m/s (100mph). They are wraparound with a one-piece, scratch resistant, clear polycarbonate lens that provides UV protection. The built-in side shields provide extra lateral protection. The spectacles are lightweight with adjustable ratchet arms, which give greater comfort and fit.

Conforms to EN166:1F.

PTDSCAPPESPCLCL

Moldex Jazz-Band Banded Earplugs provide a cost effective and convenient option against intermittent noise throughout the day. Dual material technology reduces noise transmission. Neck cord with safety release mechanism. The new design reduces band pressure by 40%.

Comes with a pair of spare pods. Replacement pods available separately.

Has a signal to noise ratio (SNR) of ;23dB.

PTDMOL6700

Moldex Classic Series Valved Masks are durable and comfortable. Ideally suited to most industrial applications, a loop strap makes it easy to put on and take off. The ActivForm seal automatically adjusts to different face shapes and sizes with no need for metal nose clips. The Ventex-Valve reduces heat and moisture.

10 x Workplace exposure limit. EN149:2001 + A1:2009.

20 x Moldex Classic Series FFP2 NR D Valved Masks

PTDMOL2405

The Moldex AIR Plus Series Reusable FFP3 RD Mask features a washable full face seal which can be used for longer than a shift. The AirWave Pleated Filter reduces breathing resistance, improves wearer comfort and minimises fatigue. A Ventex-Valve helps to reduce moisture and heat. The ActivForm seal automatically adjusts to different face shapes and sizes with no need for metal nose clips. There is also an adjustable strap and clip.

FFP3 for protection against toxic dusts, mists and fumes 20 x WEL (Workplace Exposure Limit).
Tested and certified to EN 149:2001+A1:2009.

Pack of 5 Moldex AIR Plus FFP3 RD Valved Reusable Masks

PTDMOL3405

This Scan face shield and visor is a good all-round lightweight brow guard with a polycarbonate face shield that offers unrestricted working vision and protection against medium energy flying particles and liquid splashes. It has an adjustable head harness to ensure comfortable fit over most head sizes. Its Flip-up visor mechanism allows full adjustment of the visor

Conforms to EN166:1B(3)

Size: Universal

PTDSCAPPEVISOR

This Scan replacement clear visor is suitable for the Standard Face Shield. It is made of Polycarbonate, offering unrestricted working vision and protection against medium energy flying particles and liquid splashes.

PTDSCAPPEVISREP

Twin Half Mask Respirator. A premium half mask, offering maximum protection and comfort. An extra wide sealing surface gives unparalleled comfort and fit.
Low resistance exhalation valve for easy breathing. Durable thermoplastic rubber mask and wide adjustable elastic strap make for a perfect fit. Fully adjustable 4-point cradle suspension ensuring an effective fit. Low profile angular filter design for minimal visual impairment. Manufactured from hypo-allergenic medical grade PVC.

SCAPPERESPA1 Supplied with A1 cartridges for organic vapours and gases, Conforms to EN140:1998 and EN14387:2004

SCAPPERESPP2 Supplied with P2 dust filter cartridges, Conforms to EN140:1998 and EN143:2000/A1:2006

The SCAPPERESPA1 Twin Half Mask Respirator is supplied with two A1 Cartridges for organic vapours and gases
Conforms to EN140:1998 and EN14387:2004.

PTDSCAPPERESPA1

These Scan FPP2 Premier valved disposable masks are designed to cover the nose, mouth and chin. The construction is made of the filter material itself, and the exhalation valve makes breathing easier. They are ideal for use with:
- Brick dust
- Concrete and plaster
- Hand sanding of wood and MDF
- Masonry and metal working with power tools (not welding)
- Loft insulation

With a FPP2 protection level, these masks are suitable for protecting against particles of between 2-5 microns, such as fine dusts, fumes, aqueous mists and oil based mists. For a guide on protection levels, please see below.

The masks have elasticated retaining straps to keep them securely in place. In addition they have an adjustable nose clip and soft foam nose piece for custom fitting. The non-irritating inner face piece ensures added comfort. To be disposed of after each period of work or 8 hour shift.

The masks conform to EN149:2001 and A1:2009.

Disposable Mask Protection Levels:
FFP1: Particles larger than 5 microns. Dusts, Fumes, Aqueous mists, Oil based mists
FFP2 Particles between 2 and 5 microns. Fine dusts, Fibres, Aqueous mists, Oil based mists
FFP3 Particles less than 2 microns. Very fine dusts, Fibres, Aqueous mists, Oil based mists
EN149 Filtering Face Piece for Particulates.

These SCAPPEP2MV Moulded Valved Disposable Masks are supplied in a pack of 3.

PTDSCAPPEP2MV