Spares

The Makita D-27034 Flap Disc 115mm 40 Grit is suitable for a variety of materials: ferrous, non-ferrous materials, plastics, wood, etc.

It lasts 10 times longer than conventional bonded abrasive disc, with no need for abrasive wheel instruction. Offers high productivity and gives an excellent finish. It has a fibre glass packing that is lightweight, flexible, and quiet.

Application: Steel, fabrication, automotive, derusting, deburring, welds, non-ferrous, plastic, wood.

PTDMAKD27034

The Makita D-27040 Flap Disc 115mm 60 Grit is suitable for a variety of materials: ferrous, non-ferrous materials, plastics, wood, etc.

It lasts 10 times longer than conventional bonded abrasive disc, with no need for abrasive wheel instruction. Offers high productivity and gives an excellent finish. It has a fibre glass packing that is lightweight, flexible, and quiet.

Application: Steel, fabrication, automotive, derusting, deburring, welds, non-ferrous, plastic, wood.

PTDMAKD27040

The Makita D-27056 Flap Disc 115mm 80 Grit is suitable for a variety of materials: ferrous, non-ferrous materials, plastics, wood, etc.

It lasts 10 times longer than conventional bonded abrasive disc, with no need for abrasive wheel instruction. Offers high productivity and gives an excellent finish. It has a fibre glass packing that is lightweight, flexible, and quiet.

Application: Steel, fabrication, automotive, derusting, deburring, welds, non-ferrous, plastic, wood.

PTDMAKD27056

The Makita P-57283 Impact Bit Set is ideal for the trade and professional user, and would be an ideal addition to any tool kit. Covers all the most commonly used screw types and it also contains three different lengths. These longer bits are extremely useful when you need to access screws in recesses and difficult to reach places.

It comes supplied in an extremely clever storage case; The long and extra long screwdriver bits are stored at the top, and these can be accessed by opening to 2 part lid like a pair of wings. These remain open to pried easy access to the desired bit you require. The standard 25mm long bits and magnetic bit holder are located at the back of the case at the bottom. Simply pull the flap and these fold out to provide you easy access to whichever bit you require. To close, simply fold up.

Included:

3 x 75mm Pozi Bits: PZ0, PZ1, PZ2.
2 x 75mm Phillips Bits: PH1, PH2.
2 x 75mm Slotted Bits: 3mm, 5mm.

2 x 50mm Pozi Bits: PZ1, PZ2.
2 x 50mm Phillips Bits: PH1, PH2.
2 x 50mm Slotted Bits: 3mm, 5mm.

4 x 25mm Pozi Bits: PZ0, PZ1, PZ2, PZ3.
4 x 25mm Phillips Bits: PH0, PH1, PH2, PH3.
4 x 25mm Slotted Bits: 3mm, 4mm, 5mm, 6mm.
4 x 25mm Hexagon Bits: 3mm, 4mm, 5mm, 6mm.

1 x 60mm Long Magnetic Screwdriver Bit Holder.

PTDMAKP57283

Makita P-70552 4 Way Driver and Bit set includes the following:

24 x 25mm (L) Screwdriver Bits:
8 x Pozi: Pz0 x 2, Pz1 x 2, Pz2 x 2, Pz3 x 2
4 x Slotted: 3,4,5,6mm
4 x Hex: 3,4,5,6mm
4 x Torx: T10, T15, T20, T25
4 x Phillips: Ph0, Ph1, Ph2, Ph3

1 x No.6 4-Way Driver with pilot and Pz2 Bit
1 x No.8 4-Way Driver with pilot and Pz2 Bit
1 x No.10 4-Way Driver with pilot and Pz2 Bit
1 x 4 Way Driver Barrel

PTDMAKP70552

Makita P-71831 Measuring Tape Holder is suitable for any common builders tape measuring from 3-10 metres and protects the tape from falling whilst climbing ladders. It has a HI-VIS trim which makes the holder eye-catching. The new solution with side gate lets you easily put the tool in the holder without looking.

The pocket sides are rigid, so the pockets retains it shape and allows for easy removal of the tape measure. Has a cover flap to secure tape when walking or climbing ladders, moving closure fastened by two rivets. It has an extra leather layer in friction points help protect from years of wear.

The hard wearing, leather lined interior that will protect from years of wear and tear from screws, nails and sharp fixing.

PTDMAKP71831

The Makita P-71875 Side Gate Hammer Holder sits comfortably on any Makita tool belt or normal clothing belt. Its HI-VIS trimming makes the holder eye-catching and at the same makes you visible in darkness. It has a hard wearing, leather lined interior that will protect from years of wear and tear from screws, nails and sharp fixing.

It has a stainless steel tool holder that swings to keep your hammer at a comfortable angle. New solution with side gate lets you easily put the tool in without looking at the holder. It is made from strong 1680 danier polyester with polyethylene backing and riveted, for industrial strength with galvanized washers top and bottom.

PTDMAKP71875

The Makita P-71906 Fixings Pouch & Hammer Holder with perfectly positioned wide mouth deep pocket holds fixings, provides quick tool recognition needed. The pouch sits comfortably on any Makita tool belt or normal clothing belt and has been designed to support the pocket, even when it is full.

It has a simple stainless steel hammer holder holds your hammer so it is always handy when need it. Square shape support keeps the pouch stable and vertical to prevent any danger of spillage of fixings. Versatile slots for screwdrivers and other tools.

PTDMAKP71906

The Makita MAKP90227 P-90227 50 Piece Power Drill Accessory Set.

Is an indispensable set for tradesmen or an DIY enthusiast and it incorporates an impressive range of 50 assorted essentials for your everyday working needs. The set includes HSS-TIN and HM-CT drill bits

Comes in a hard-wearing storage injection moulded case and is suitable for drilling with PVC, wood, metal, and masonry.

The Makita MAKP90227 P-90227 50 Piece Power Drill Accessory Set comprises of:

3 x 25mm Pozi Bits: PZ1, PZ2, PZ3
2 x 25mm Phillips Bits: PH2, PH3
3 x 25mm Hex Bits: 4mm, 5mm, 6mm
2 x 25mm Slotted Bits: 4mm, 5.5mm
3 x 50mm Pozi Bits: PZ1, PZ2, PZ3
7 x 50mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX40
1 x 60mm Bit Holder
3 x Flat Bits: 10mm, 16mm, 18mm
7 x Nut drivers: 6mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm
6 x HSS Drill Bits: 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm
6 x Masonry Wood Bits: 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm
6 x Brad Point Wood Drills: 4mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm
1 x Centre Punch

PTDMAKP90227

HiKOKI 998039 Die Assembly, metal cutting, for use with 998030 Punch.

Suitable for CN16 Machine.

PTDHIK998039

The DEWALT DCE5601 Replacement Silicon Gun Cartridge for use with DCE580 XR Caulk Gun.

Specification:

Capacity: 300ml

PTDDEWDCE5601XJ

The Makita MAKD1876410 115mm (4.1/2in) thin cutting discs are suitable for use with all makes of 115mm Angle Grinders and are compatible with most brands, Bosch, DEWALT, Black & Decker, Milwaukee, to name but a few.

They are supplied in a tin of 10 discs to protect the discs from damage and provide safe storage when not in use. For cutting Stainless Steel / INOX; Use only for cutting NOT SUITABLE FOR GRINDING.

The use of suitable gloves, goggles and a masks recommended.

Specifcation

Size: 115 x 1.2 x 22.23mm bore.
Maximum Speed: 80m/s (4800m/min).

PTDMAKD1876410

HiKOKI 998030 Punch for metal cutting. Use with 998039 for nibbler Die Assembly.

Suitable for CN16SA Machine.

PTDHIK998030

Manufactured specifically to fit the Kielder KWT-002CS Impact Wrench, which features clip & pin style drive. With robust sturdy pins, made from grade 303 stainless steel.

Required to secure 1/2in sockets.

PTDKIEPO002CSPO

Batavia Replacement Cutter Head for the Cordless Universal Cutter 3.6V (BAT7063393). Suitable for cutting all kinds of materials; textiles, leather, cardboard, wallpaper etc.

PTDBAT7058878