Hinge & Specialists Jigs
- Trend Anglefix Mitre Guide ANGLEFIX
The Trend Anglefix Mitre Guide halves the angle for mitre joints and is ideal for mitre cutting of frames, skirting, architrave and beading as well as basic marking out.
It halves angles to achieve correct cutting angle before cutting mitres and sets internal and external angles.
Can be used with hand mitre and snip-off saws.
Patent No. PCT WO 00/67969.
PTDTREANGLEFIXLearn MoreTrend Vari Jig Angle Guide VJSAG36 VJS/AG/36
The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25 to 155 and preset angle for 30, 45, 60, 90, 120, 135 and 150. The router working length at 90 is 915mm (36 inch), the circular saw working length at 90 is 780mm (30 3/4 inch).
It has an angle tolerance 0.2 with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps.
Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.
PTDTREVJSAG36Learn MoreTrend Corner Chisel C/CHISEL
The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened.
Ideal for use with hinge and lock jigs.
PTDTRECCHISELLearn MoreTrend Door Clamp 55mm Capacity (Ratchet Type) D/CLAMP/A D/CLAMP/A
Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor damage. For doors up to 55 mm thick.
Patent No. PCT/EP2006/006072.
PTDTREDCLAMPLearn MoreTrend Door Stand 32mm - 55mm D/STAND/A D/STAND/A
The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.
PTDTREDSTANDLearn MoreTrend Hinge Jig HINGE/JIG
The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern.
Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges. Use with a light duty router with 1/4inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep.
Patent No. GB2285410.
Includes: 4 x Apertures, 2 x Bradawls, 1 x 16mm Guide Bush, 1 x T-Handle Hex Key, 1 x 4mm Spacing Gauge and 1 x Plastic Storage Tube.
Hinge Sizes Possible:
Length Min/Max: 67-127mm (2.5/8-5in).
Width Min/Max: 9.5-35mm (3/8-1.3/8in).
Door Sizes Possible:
Height Min/Max: 1955-2032mm (6ft 5in - 6ft 10in).
Thickness Min/Max: 16-44mm.
PTDTREHINGEJIGLearn MoreTrend 2 Part Hinge Jig H/JIG/A H/JIG/A
A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames.
It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly.
Used on-site and in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick and simple to set-up as the hinge is used as the pattern.
Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges.
Use with a light-duty router with 1/4 inch collet.
Long reach router cutter required, 12 mm diameter with 70 mm overall length.
Angled position slots to prevent creep.
Hinge sizes possible:
Length min: 2 5/8 in (67 mm).
Length max :5 in (127 mm).
Width min :3/8 in (9.5 mm).
Width max: 1 3/8 in (35 mm).
Door sizes possible:
Height min: 6 ft 5 in (1955 mm).
Height max: 6 ft 10 in (2100 mm).
Thickness min: 5/8 in (16 mm).
PTDTREHJIGALearn MoreTrend HJIGC 2 Part Skeleton Hinge Jig H/JIG/C
The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, ensuring that the job can be completed accurately and quickly. It is ideal for use on-site and in joinery shops to increase productivity with excellent results.
The jig has fully adjustable apertures for fire door requirements and renovation work. It is ideal for fitting a new door into an old frame, and is suitable for timber based doors and square butt hinges.
The jig is supplied with a carry case, bradawls and a special 16mm guide bush.
Preset hinge sizes: 20mm, 25mm and 30mm.
Hinge sizes possible:
Minimum length: 67mm (2.5/8in).
Maximum length: 127mm (5in).
Minimum width: 12.7mm (1/2in).
Maximum width: 35mm (1.3/8in).
Door sizes possible:
Minimum height: 1,956mm (6ft5in).
Maximum height: 2,100mm (6ft10in).
Minimum thickness: 16mm (5/8in).
Maximum thickness: 51mm (2in).
Overall length: 1,956mm.
PTDTREHJIGCLearn MoreTrend 3-in-1 Pocket Hole Jig PH/JIG/BK
Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin hole or single hole pockets, perfect for wide or for narrow stock components. With reversible depth gauges, ideal for new projects and repair work.
Hardened drilling sleeves for accurate, consistent pockets. Works with timber 12.7mm to 38mm thick. Portable and adaptable for multiple jointing styles and applications with tool-free, fast and easy set up. Build cabinets, furniture and small joinery projects with ease.
Supplied with: 50 x Assorted Screws, 1 x HSS Drill Bit with Collar, 1 x 150mm Square Drive Bit, 1 x Adaptor Plate, 1 x Hex Key 3mm A/F and 1 x Carry Case.
Timber Thicknesses: 12.7-38mm
Hole Pitch: 28-50mm
PTDTREPHJIGBKLearn MoreTrend Single Pocket Hole Jig PH/JIG/BS
The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease.
The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable.
Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.
PTDTREPHJUGBSLearn MoreHinge & Specialists Jigs
VAT Number: 100 5143 84