Forstner & Lip & Spur Bits

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

5 Piece Lip & Spur Wood Drill Bit Set, these are the preferred cutting tip design for drilling wood, these alloy steel drills have a steeper twist and a deeper flute than HSS bits, for rapid clearance of waste. They are ideal for use in dowelling jigs.

Sizes: 4mm, 5mm, 6mm, 8mm, 10mm.

4mm: Working Length: 43mm, Overall Length: 75mm.
5mm: Working Length: 50mm, Overall Length: 85mm.
6mm: Working Length: 52mm, Overall Length: 92mm.
8mm: Working Length: 75mm, Overall Length: 120mm.
10mm: Working Length: 80mm, Overall Length: 130mm.

PTDFAIWDBSET5

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 3mm.
Working Length: 30mm.
Overall Length: 60mm.

PTDFAIWDB30

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 4mm.
Working Length: 43mm.
Overall Length: 75mm.

PTDFAIWDB40

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 5mm.
Working Length: 50mm.
Overall Length: 85mm.

PTDFAIWDB50

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 6mm.
Working Length: 52mm.
Overall Length: 92mm.

PTDFAIWDB60

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 8mm.
Working Length: 75mm.
Overall Length: 120mm.

PTDFAIWDB80

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 10mm.
Working Length: 80mm.
Overall Length: 130mm.

PTDFAIWDB100

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 12mm.
Working Length: 100mm.
Overall Length: 150mm.

PTDFAIWDB120

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 14mm.
Working Length: 105mm.
Overall Length: 160mm.

PTDFAIWDB140

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

This Faithfull Lip & Spur Wood Drill Bit has the following specification:

Diameter: 16mm.
Working Length: 115mm.
Overall Length: 180mm.

PTDFAIWDB160

The Faithfull 5 Piece Forstner Bit Set, used for drilling in woodworking in preference to drill bits and flat bits whenever a very clean and precise hole is required. They also enable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole is required. Supplied in an aluminium storage case.

Sizes: 15mm, 20mm, 25mm, 30mm, 35mm.

Shank Size: 8mm.

PTDFAIFORSET5

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

The Irwin IRW10502792 Brad Point Drill Bit comes in the following:
Size: 3.0 x 67mm

PTDIRW10502792

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

The Irwin IRW10502793 Brad Point Drill Bit comes in the following:
Size: 4.0 x 75mm

PTDIRW10502793

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

Size 5.0 x 95mm

PTDIRW10502794

The Irwin Brad Point Drill Bits are specially designed for precision wood drilling, ideal for furniture and cabinet making. The centre point is for easy start up and the spurred cutting head is designed to reduce splintering and ensure smooth clean holes.

The body is fully hardened for maximum wear resistance. They also have wide flutes which provide a fast, continuous flow of chips.

Size 6.0 x 103mm

PTDIRW10502795