Wood Drill Bits

Bahco Flat Bit Extension Shaft is hardened and ground, lacquered for rust protection, and features two locking screws. One hexagonal key for fastening is included with each extension shaft.

PTDGRPBAH9525S

The Black and Decker Brad Point Wood Drill Bits are designed to drill holes in softwood or plywood. With a centre point for accuracy and a deep flute for quick waste clearance.

PTDGRPBDX52001

Black and Decker Flat Bits are used for boring larger diameter holes in timber. For use in electric drills.

PTDGRPBDX52090

The DEWALT high quality chrome vanadium flat drill bit range feature a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency.

This flatwood range accommodate the following applications:
For rapid drilling of holes in wood.
Suitable for natural hard and soft wood, chipboard and other man made materials.
Ideal for door locks, mortising, electrical and plumbing work.

PTDGRPDEWDT4810QZ

The DEWALT Brad Point Drill bits are manufactured from chrome vanadium alloyed steel. A centre location point and outer cutting spurs ensure clean accurate holes.

For diameters 11mm and above, the shank is reduced to 9.5mm. Brad point drill bits are suitable for drilling hardboard, plywood, chipboard and all natural hard and softwood.

PTDGRPDEWDT4503QZ

Bahco Long Combination Auger Bit, these are dual-purpose and can be used in hand braces and power drills. Designed to quickly drill accurate, very clean holes in awkward to reach spots or through heavy-section timbers.

The auger bits are lacquered for protection against rust.

Overall length: 400mm.

PTDGRPBAH95276

Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file.

Extra long series for deep boring.

Overall Length: 400mm.

PTDGRPFAICA6L

Faithfull Combination Wood Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be used in timber, plywood, MDF and blockwood and can be resharpened using a hand file.

PTDGRPFAICA6

Bahco Expansive Bits are capable of drilling a wide range of shallow hole sizes in wood.

The MD series have round shanks and are suitable for use with power tools.

Made from a single-piece of drop forged steel. Head and adjustable cutters hardened and tempered. Locking screw zinc plated with hexagonal head with slot.

With expansive bits it is possible to drill a full range of diameters with the same bit, in wood. Adjustable with screwdriver or wrench.

PTDGRPBAH9528S

The Bahco Long Flat Bit is a top quality flat bit with an extended shaft, useful for reaching awkward spots or for drilling accurate, deep holes into wood.

PTDGRPBAH95316

The 9529 Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit.

The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.

PTDGRPBAH95296

Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills

Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.

PTDGRPFAIFB6

The Faithfull Brad Point Wood Drill Bits are the preferred cutting tip design for drilling wood, chipboard and MDF. This alloy steel drill has a steeper twist and a deeper flute than HSS bits for rapid clearance of waste. Ideal for use in dowelling jigs.

PTDGRPFAIWDB30

The Faithfull Hinge Boring Bit with a Tungsten Carbide cutter is designed for repetitive drilling of blind holes when fitting concealed (blum) hinges in kitchen, bedroom and bathroom cabinet doors. They are suitable for use on all natural woods and man-made materials such as block board, melamine faced boards, chipboard and MDF and provide a long working life.

These bits should always be used with a stand-mounted drill.

Features:

Solid carbide tipped centre point
Solid carbide main cutter
Relief angle to reduce drag
5/16in - 8mm shank

PTDGRPFAIHBB26

Bahco 9526 Combination Auger Bits are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life.

The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.

PTDGRPBAH95266