Masonry Drill Bits

The Black & Decker Masonry Drill Bit Sets with various sized drill bits supplied in a plastic case.

3 Piece X56128: 5, 6 and 7mm.

8 Piece X56040: 3, 4, 5, 6, 7, 8, 9 and 10mm.

Masonry drill set.

Consisting of: 5, 6, 7 mm drills

PTDB/DX56128

The Black & Decker Bullet Masonry Drill Bits have a round shank and are suitable for house bricks, concrete, natural stone and ceramic tiles, (please note no hammer action should be used on tiles). Hi-tech bullet bit end eliminates walking.

Overall Length 120 mm
Working Length 80 mm
Diameter 8 mm

PTDB/DX58004

Black & Decker Masonry Drill Bit with tungsten carbide brazed tips for drilling house bricks and masonry. They can also be used to drill concrete, natural stone and ceramic tiles.

Do NOT use hammer action when drilling ceramic tiles.

This Black & Decker Masonry Drill has the following specification:

Diameter: 4mm
Overall Length: 75mm
Working Length: 40mm

PTDB/DX53080

Black & Decker Masonry Drill Bit with tungsten carbide brazed tips for drilling house bricks and masonry. They can also be used to drill concrete, natural stone and ceramic tiles.

Do NOT use hammer action when drilling ceramic tiles.

This Black & Decker Masonry Drill has the following specification:

Diameter: 6.5mm
Overall Length: 100mm
Working Length: 60mm

PTDB/DX53100

Black and Decker Long Series Masonry Drill Bits for drilling house bricks and masonry. They have a parallel round shank.

Diameter 12mm
Overall Length 200mm
Working Length 135mm

PTDB/DX53020

Black & Decker Masonry Drill Bit with tungsten carbide brazed tips for drilling house bricks and masonry. They can also be used to drill concrete, natural stone and ceramic tiles.

Do NOT use hammer action when drilling ceramic tiles.

This Black & Decker Masonry Drill has the following specification:

Diameter: 16mm
Overall Length: 150mm
Working Length: 95mm

PTDB/DX53140

Black & Decker Masonry Drill Bit with tungsten carbide brazed tips for drilling house bricks and masonry. They can also be used to drill concrete, natural stone and ceramic tiles.

Do NOT use hammer action when drilling ceramic tiles.

This Black & Decker Masonry Drill has the following specification:

Diameter: 14mm
Overall Length: 150mm
Working Length: 95mm

PTDB/DX53135

Black & Decker Masonry Drill Bit with tungsten carbide brazed tips for drilling house bricks and masonry. They can also be used to drill concrete, natural stone and ceramic tiles.

Do NOT use hammer action when drilling ceramic tiles.

This Black & Decker Masonry Drill has the following specification:

Diameter: 12mm
Overall Length: 150mm
Working Length: 85mm

PTDB/DX53125

Black and Decker Long Series Masonry Drill Bits for drilling house bricks and masonry. They have a parallel round shank.

Diameter 14mm
Overall Length 200mm
Working Length 135mm

PTDB/DX53030

Black and Decker Long Series Masonry Drill Bits for drilling house bricks and masonry. They have a parallel round shank.

Diameter 6mm
Overall Length 200mm
Working Length 135mm

PTDB/DX53000

These Milwaukee Concrete Drill Bits have a round shank and diamond ground percussion carbide tip with a dual cutting edge. They are ideal for drilling in brick, tile, ceramic, concrete, plaster, slate and aerated concrete blocks.

Conform to DIN 8039 Standards.

PTDGRPMIL2363633

The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless low /min multi-purpose drilling. In tests they produced between 90-129% more holes per battery charge than leading competitors.

They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork.

Only one drillbit is needed to do the job and will drill a wide selection of different materials like: Brickwork, Ceramic Tiles, Breeze Block, Wood, Dry Wall, Gypsum Board, Limestone, Slate, Marble, Eternite and Plastics/Reinforced plastics.

Irwin Multi-Purpose Cordless Drill Bit Set 5 Piece

Sizes: 5, 5.5, 6, 8 and 10mm.

PTDIRW10501939

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability.

The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

Irwin Masonry Drill Bit for Cordless Drills.

Specifications:
Diameter: 3.0mm.
Total length: 70mm.
Working Length: 40mm.

PTDIRW10501812

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability.

The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

Irwin Masonry Drill Bit for Cordless Drills.

Specifications:
Diameter: 5.5mm.
Total length: 160mm.
Working Length: 115mm.

PTDIRW10501820

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability.

The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.

Irwin Masonry Drill Bit for Cordless Drills.

Specifications:
Diameter: 6.0mm.
Total length: 100mm.
Working Length: 60mm.

PTDIRW10501821