15 items

Transformers

Transformers
View as Grid List

15 items

Set Ascending Direction Set Descending Direction
  1. Faithfull 5kVA Triple Outlet Transformer TRAN5

    SKU: PTDFPPTRAN5

    List Price:  

    £372.82

    Our Price:  

    £191.98

    Inc VAT:  

    £230.38

    The Faithfull TRAN5 is designed for use on the worksite, or anywhere where a 110 volt supply is required, to provide power to industrial powertools.

    This 110 Volt transformer has 3 outlets 2 x 16 Amp and 1 x 32 Amp and has a heavy-duty GRP waterproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions.

    This Faithfull 5 kVA transformer has a great safety features include a re-settable thermal overload protection function and a rubber cable fitted with BS approved 13 Amp rubber plug.

    Not suitable for use on 110v heaters where a continuous load is required.

    PTDFPPTRAN5

    Learn More
  2. Faithfull Transformer 1.5 kVA Single Outlet TRAN15

    SKU: PTDFPPTRAN15

    List Price:  

    £120.43

    Our Price:  

    £66.70

    Inc VAT:  

    £80.04

    The Faithfull TRAN15 is designed for use on the worksite to provide power to industrial powertools.
    This single outlet 110 Volt 16amp transformer has a heavy-duty GRP weatherproof case which is rated to IP44, making it fully weatherproof and therefore suitable for use in most types of outdoor and worksite conditions.

    This Faithfull 1.5 kVA transformer has great safety features that include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with a BS approved 13 amp rubber plug.

    Not suitable for use on 110v heaters.

    PTDFPPTRAN15

    Learn More
  3. Faithfull Transformer 3.3kVA Dual Socket TRAN33A

    SKU: PTDFPPTRAN33A

    List Price:  

    £125.64

    Our Price:  

    £67.18

    Inc VAT:  

    £80.62

    The Faithfull Power Plus TRAN33A is a 16 Amp 3.3kVA Twin Outlet transformer, ideal for site use.

    It has a heavy-duty GRP weatherproof case which is rated to IP44. It has a resettable thermal overload protection and is fitted with BS approved 13 amp plug. It also includes a unique blue LED Power On indicator, which provides the user with an at a glance confirmation that the unit is live.


    This model has 2 x 110V 16 Amp sockets.

    NOT suitable for use on 110v heaters where a continuous load is required.

    PTDFPPTRAN33A

    Learn More
  4. Carroll Meynell 10K16 Transformer Six Outlet 10kVA 230V CM10K1AF/420/SB/C&M

    SKU: PTDC/M10K16

    List Price:  

    £674.16

    Our Price:  

    £542.40

    Inc VAT:  

    £650.88

    Transformer for operation from single phase 230V mains supplies providing 110V Center Tapped Earth (CTE) output for the operation of portable tools, lighting and other construction site equipment.

    It is designed to provide power of 10kVA through a number of output socket options.

    The unit has 4 x 16A sockets and 2 x 32A sockets.

    - heavy-duty sheet steel enclosure to IP23
    - Manufactured generally to BS4363
    - MCB overload protection for both the input and outputs
    - Output sockets to BS EN 60309 / IEC 60309 (Previously BS4343)
    - M5 Stud input terminals to accept your cabling

    PTDC/M10K16

    Learn More
  5. Carroll Meynell 10K36 Transformer Six Outlet 10kVA 400V CM10K3/240/SB/C&M

    SKU: PTDC/M10K36

    £862.08

    Transformer for operation from three phase 400V supply providing 110V Center Tapped Earth (CTE) output for the operation of portable tools, lighting and other construction site equipment.

    It is designed to provide power of 10kVA through a number of output socket options.

    The unit has 4 x 16A sockets and 2 x 32A sockets.

    - Heavy-duty sheet steel enclosure to IP23
    - Manufactured generally to BS 4363
    - MCB overload protection for both the input and outputs
    - Output sockets to BS EN 60309 / IEC 60309 (Previously BS 4343)
    - M5 Stud input terminals to accept your cabling

    PTDC/M10K36

    Learn More
  6. Carroll Meynell 5003/3 Transformer Triple Outlet Rating 5 kVA Continuous 2.5kVA CM5000/210/PT

    SKU: PTDC/M5003

    £234.24

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing .

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    2 x 16 Amp outlets , 1 x 32 Amp outlet

    Intermittent transformer

    This item shipped without an input plug. Maximum input current 23A.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 KV.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M5003

    Learn More
  7. Faithfull Heater Transformer 3KVA Continuous Rate TRANHEAT

    SKU: PTDFPPTRANHEAT

    List Price:  

    £517.79

    Our Price:  

    £263.98

    Inc VAT:  

    £316.78

    The Faithfull Power Plus TRANHEAT is a 110V vented portable transformer suitable for use with 110V electric heaters or other applications where a continuous load is to be applied. This model has two 110 Volt sockets, one is 16 amp and the other is 32 amp.

    Safety features include a resettable thermal overload protection function and a heavy-duty rubber cable fitted with BS approved 13 amp rubber plug. The vented steel case conforms to IP20 for water and dust ingress protection.

    Continuous rating: 3KVA.

    PTDFPPTRANHEAT

    Learn More
  8. Faithfull Thermal Reset Switch For FPPTRAN33A TRASWITCH

    SKU: PTDFPPTRASWITCH

    List Price:  

    £9.68

    Our Price:  

    £6.46

    Inc VAT:  

    £7.75

    This Faithfull Power Plus replacement Thermal Reset Switch is suitable for the FPPTRAN33A Dual Socket Transformer.

    PTDFPPTRASWITCH

    Learn More
  9. Carroll Meynell 1000/2 Transformer Twin Outlet Rating 1kVA Continuous 500VA 1000/2

    SKU: PTDC/M10002

    List Price:  

    £123.62

    Our Price:  

    £82.70

    Inc VAT:  

    £99.24

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    Tool Rating 1kVA.
    Output Sockets. 2 x 16amp.

    Transformer Specifications

    Input 240 volts 50Hz single phase. Complete with 2 metres of 3-core flexible cable to BS6500 for connection to mains supply and a 13 amp plug.

    Output 110 volts. Centre tapped and earth screen between primary and secondary windings which is bonded to the centre tap of the secondary winding, the earth pin on each output socket and earth core of the mains input plugs and sockets.

    BS4343 flush type sockets with spring flap covers fitted as standard. Units are protected by suitably rated thermal overload cut-outs.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 Kv.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M10002

    Learn More
  10. Carroll Meynell 1500/2 Transformer Twin Outlet Rating 1.50kVA Continuous 750VA 1500/2

    SKU: PTDC/M15002

    List Price:  

    £143.56

    Our Price:  

    £83.18

    Inc VAT:  

    £99.82

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    Tool Rating 1.50 kVA.
    Output Sockets. 2 x 16amp.

    Transformer Specifications

    Input 240 volts 50Hz single phase. Complete with 2 metres of 3-core flexible cable to BS6500 for connection to mains supply and a 13 amp plug.

    Output 110 volts. Centre tapped and earth screen between primary and secondary windings which is bonded to the centre tap of the secondary winding, the earth pin on each output socket and earth core of the mains input plugs and sockets.

    BS4343 flush type sockets with spring flap covers fitted as standard. Units are protected by suitably rated thermal overload cut-outs.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 Kv.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M15002

    Learn More
  11. Carroll Meynell 2250/2 Transformer Twin Outlet Rating 2.25kVA Continuous 1.125kVA 2250/2

    SKU: PTDC/M22502

    List Price:  

    £149.00

    Our Price:  

    £87.98

    Inc VAT:  

    £105.58

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    Tool Rating 2.25kVA.
    Output Sockets. 2 x 16amp.

    Transformer Specifications

    Input 240 volts 50Hz single phase. Complete with 2 metres of 3-core flexible cable to BS6500 for connection to mains supply and a 13 amp plug.

    Output 110 volts. Centre tapped and earth screen between primary and secondary windings which is bonded to the centre tap of the secondary winding, the earth pin on each output socket and earth core of the mains input plugs and sockets.

    BS4343 flush type sockets with spring flap covers fitted as standard. Units are protected by suitably rated thermal overload cut-outs.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 Kv.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M22502

    Learn More
  12. Carroll Meynell 3300/2 Transformer Twin Outlet Rating 3.3kVA Continuous 1.65kVA 3300/2

    SKU: PTDC/M33002

    List Price:  

    £160.90

    Our Price:  

    £79.98

    Inc VAT:  

    £95.98

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    Tool Rating 3.3kVA
    Output Sockets. 2 x 16amp.

    Transformer Specifications

    Input 240 volts 50Hz single phase. Complete with 2 metres of 3-core flexible cable to BS 6500 for connection to mains supply and a 13 amp plug.

    Output 110 volts. Centre tapped and earth screen between primary and secondary windings which is bonded to the centre tap of the secondary winding, the earth pin on each output socket and earth core of the mains input plugs and sockets.

    BS 4343 flush type sockets with spring flap covers fitted as standard. Units are protected by suitably rated thermal overload cut-outs.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 Kv.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M33002

    Learn More
  13. Carroll Meynell 750/1 Transformer Single Outlet Rating 750VA Continuous 375VA 7501

    SKU: PTDC/M7501

    List Price:  

    £117.66

    Our Price:  

    £79.98

    Inc VAT:  

    £95.98

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    Tool Rating 750VA.
    Output Sockets. 1 x 16amp.

    Transformer Specifications

    Input 240 volts 50Hz single phase. Complete with 2 metres of 3-core flexible cable to BS6500 for connection to mains supply and a 13 amp plug.

    Output 110 volts. Centre tapped and earth screen between primary and secondary windings which is bonded to the centre tap of the secondary winding, the earth pin on each output socket and earth core of the mains input plugs and sockets.

    BS EN60309 flush type sockets with spring flap covers fitted as standard. Units are protected by suitably rated thermal overload cut-outs.

    Portable Tool Transformer - Safety Instructions
    1. The transformer will get warm in normal use, make sure that the heat will not damage any floor covering that it is standing on. It is not advisable to place the transformer onto carpet, vinyl floor covering, etc., and use at continuous rating for any length of time.

    4. Although the transformer may be of insulated construction, it is not double insulated (class 2) and the earth pin of the output socket must be connected to the centre point of the secondary winding and to the transformer incoming earth.

    2. The transformer may be fitted with an over temperature cut-out switch, in the event of this operating, let the unit cool down then reset the cut-out switch before using again.

    5. Power tool transformers must not be tested as class 2 appliances on portable appliance testers, flash test only at 1.5 Kv.

    3. Check the transformer power rating against the power rating of the tool you are going to use. The transformer can supply portable tools in normal use up to the rating shown on the transformer and consultation with the above table. Care should be taken when using the transformer to supply constant loads, i.e. floodlights, wallpaper strippers etc. The transformer can only supply about half of its rated power to continuous load like this.

    6. Power tool transformers have an inherent high inrush current, in the event of the fuse blowing on switch, check that the fuse in the input plug is suitably rated and is of the anti surge type. Miniature circuit breakers protecting the sockets should have a type 4 tripping characteristic.

    PTDC/M7501

    Learn More
  14. Faithfull IP44 Panel Socket 16A 110V PANSOC16

    SKU: PTDFPPPANSOC16

    List Price:  

    £6.62

    Our Price:  

    £3.98

    Inc VAT:  

    £4.78

    Replacement shuttered panel socket for Faithfull transformers.

    PTDFPPPANSOC16

    Learn More
  15. Carroll Meynell Transformer Twin Outlet Range

    SKU: PTDGRPCM10002

    From:  

    £79.98

    Inc VAT:  

    £95.98

    Carroll & Meynell transformers are primarily for use when using portable electric tools on outdoor sites.

    They are manufactured to BS EN 61558 and have thermal overload protection and with BS EN 60309 output sockets as standard. They have a glass reinforced polyester case and input flex and 13 amp plug. The 5kVA model is without a fitted plug, max input current 23amp.

    The Carroll & Meynell transformers are completely encapsulated for extra weatherproofing.

    These transformers are rated for intermittent operation at their maximum listed power capability for a duty cycle of 25%. i.e. 5 minutes ON 15 minutes OFF. They may be used in a continuous operation mode at a rating of 50% of their maximum capability. E.g. a 3.3kVA unit may be operated continuously at 1.65kVA.

    PTDGRPCM10002

    Learn More
No more product
Transformers
© 2020 Building Supplies Direct Online Ltd
VAT Number: 100 5143 84