Universal Blades

Tungsten carbide grit edged jigsaw blades.
Suitable for cutting ceramics, slate, fibreglass, plastics etc.
Ideal for awkward shaped cuts.
Black and Decker fitting.

PTDVIT102765

The Starrett BU310DT-5 Wood Cutting Jigsaw Blades with Unified Shank. They will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied as a pack of 5.

Specification

Length: 75mm.
Width: 7.5mm.
Thickness: 1.3mm.
TPI: 10.
Tooth: Ground.
Set: Tapered, Downstroke Cut.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

PTDSTRBU310DT5

The Starrett BU310-5 Wood Cutting Jigsaw Blades with Unified Shank, will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied as a pack of 5.

Specification

Length: 75mm.
Width: 7.5mm.
Thickness: 1.3mm.
TPI: 10.
Tooth: Ground.
Set: Tapered.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

PTDSTRBU310T5

The Starrett BU424-5 ;Metal Cutting Jigsaw Blades with Unified Shank will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification

Length: 100mm.
Width: 9.5mm.
Thickness: 1mm.
TPI: 24.
Tooth: Regular.
Set: Wavy.

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

PTDSTRBU4245

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in metal. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 1.5-3 mm (1/16Inch -1/8in).

Length: 92mm.
Pitch: 24 Precise Cut.

Supplied in a pack of 5.

PTDIRW10504289

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

Universal shank with 3 sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, coarse cuts in hard and soft wood, plastics 5-60 mm (7/32Inch -2 3/8in).

Length: 100mm.
Pitch: 8 Fast Cut.

Supplied in packs of 5.

PTDIRW10504290

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast straight cuts in hard and soft wood, plastics, particleboard 6-60 mm (1/4Inch -2 3/8in).

Length: 100mm.
Pitch 6 Fast Cut.

Supplied in a pack of 5.

PTDIRW10504291

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in metal. Straight cuts in metal, non-ferrous metal, aluminium, 3-6 mm (1/8Inch -1/4in).

Length: 92mm.
Pitch: 20 Precise Cut.

Supplied in a pack of 5.

PTDIRW10504293

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in thin and thick meta metal. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in).

Length: 92mm.
Pitch: 36 Precise Cut.

Supplied in a pack of 5.

PTDIRW10504294

Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.

With a universal shank and 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Progressive tooth spacing for straight , accurate cuts in thick and thin wood materials, hard and soft wood, particleboard and plywood 1-80 mm (3/16Inch -3 1/8in).

Length: 115mm.
Pitch: Progressive.

Supplied in a pack of 5.

PTDIRW10504295

Irwin Jigsaw Metal & Wood Cutting blades made from Bi-Metal which is a highly flexible, tough combination of HSS and HCS is suitable for the most demanding applications.

With a universal shank and HSS and BiMetal progressive tooth form, for all-purpose cutting in wood and metal. Progressive tooth spacing for fast cuts, long life in metal 3.5-10mm, wood with nails, particleboard 3.5-90mm, non-ferrous metal, aluminium, plastics 2-30mm.

Length: 132mm.
Pitch: Progressive Precise Cut.

Supplied in a pack of 5.

PTDIRW10504296

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal.

HSS milled teeth for a longer life and fast, even cuts in metal. Progressive tooth spacing, for fast cuts, long life, in sheet metal 2-10mm, non-ferrous metal 2-20mm, stainless steel 1.5-3mm, plastic 1.5-30mm, fiberglass 1-20mm.

Length: 92mm.
Pitch: Progressive Precise Cut.

Supplied in a pack of 5.

PTDIRW10504297

The Starrett BU224S-5 Metal Cutting Jigsaw Blades with Unified Shank, these blades will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products.

Supplied in a pack of 5.

Specification:

Length: 50mm
Width: 4.5mm
Thickness: 1mm
TPI: 24
Tooth: Scroll
Set: Wavy

Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

PTDSTRBU224S5

Black and Decker Speciality scroll cutting blades for intricate curves and scrolls in wood.

Pack of 3.
Size: 70mm (2.3/4 inch).

Applications :
1. Wood
2. Chipboard

PTDB/DX23003

Tungsten carbide grit edged jigsaw blade.
Suitable for cutting ceramics, slate, fibreglass, plastics etc.
Ideal for awkward shaped cuts.
Universal fitting, bayonet type.

PTDVIT102766