Special Offers

Faithfull Professional Self-Adhesive Hazard Tape is strong, durable and incredibly hard-wearing. Ideal for high traffic areas where safety is a high priority. This tape is designed for marking out or cordoning off areas and the highly contrasting coloured stripes serve as a clear visual warning.

Suitable for a wide range of industrial uses in various trades and services, including construction sites, factories, warehouses, emergency services and many other situations where safety of personnel is a priority.

This Faithfull Professional Self-Adhesive Hazard Tape has the following specification:

Length: 33m
Width: 50mm
Colour: Black and Yellow stripes

PTDFAITAPEHAZBY

Reisser R2 Woodscrews have been trusted for over 30 years to give consistent performance in all timbers and board materials.

The 25 degree needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40 percent less driving resistance and easy penetration. Specially hardened steel gives the R2 maximum tensile and torsional strength and the tried and tested R2 thread pattern offers exceptionally high pull out resistance. The Yellow Tropicalised coating gives superior corrosion resistance (compared to a standard BZP coating) and the deep reinforced pozi drive countersunk head recess allows the best possible fit to the driver bit, reducing cam-out and providing extra strength at the critical junction between shank and head.

Fully CE accredited the R2 is available if a huge range of sizes, in full and part thread and in many volume options. Presented in attractive, informative packaging the R2 Woodscrew sets the standard for the Consistency of Quality and performance of all Reisser products.

PTDGRPREI9221425PB

Reisser Cutter Woodscrews represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20 degree needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40 percent less driving resistance and easy penetration. The Yellow Tropicalised coating gives superior corrosion resistance (compared to a standard BZP coating) and the deep reinforced countersunk head recess allows the best possible fit to the driver bit, reducing cam-out and providing extra strength at the critical junction between shank and head.

Presented in eye-catching, informative packaging the Cutter leads the way in premium High Performance Woodscrews.

PTDGRPREI8221425PB

The Original Steel System Case. A robust, versatile, professional storage system.

Manufactured to the highest quality standards it offers adaptable compartment storage with the additional features of industrial, heavy duty toggle catches plus an integral safety catch which locks on closing the lid to prevent accidental opening and spillage. Cases contain 14 compartments filled with Reisser Cutter woodscrews. Reisser Cutter Woodscrews represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20 degree needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40 percent less driving resistance and easy penetration. The Yellow Tropicalised coating gives superior corrosion resistance (compared to a standard BZP coating) and the deep reinforced countersunk head recess allows the best possible fit to the driver bit, reducing cam-out and providing extra strength at the critical junction between shank and head.

Presented in eye-catching, informative packaging the Cutter leads the way in premium High Performance Woodscrews.

Contents include: 3.5 x 20mm (250 Pcs), 3.5 x 25mm (190 Pcs), 3.5 x 30mm (160 Pcs), 3.5 x 40mm (100 Pcs), 3.5 x 50mm (70 Pcs), 4.0 x 25mm (300 Pcs), 4.0 x 30mm (250 Pcs), 4.0 x 40mm (200 Pcs), 4.0 x 50mm (250 Pcs), 5.0 x 50mm (200 Pcs), 5.0 x 60mm (160 Pcs), 5.0 x 70mm (130 Pcs), 5.0 x 80mm (120 Pcs) and 5.0 x 100mm (100 Pcs) supplied in Metal System Case.

PTDREISC214MYCUTT

The Faithfull Countryman Bill Hook has a double edge blade with a well-balanced design. Suitable for cutting through rough grass, weeds and brush. This traditional edge tool is widely used in forestry, hedge laying, gardening, field and roadside maintenance. The tool is used in a chopping action to cut bushes, shrubbery and small branches primarily for cutting green wood (living wood; wood which hasnt dried).

PTDFAICOUBILL

The Faithfull Countryman Turfing Iron is a specialist tool and is designed to facilitate the lifting of turf. A flat heart shaped blade is positioned at an angle to the long handle, so that it can be pushed along the ground under each cut turf. By using a back and forth motion, the flat blade will cut through the soil and roots to produce a smooth surface that makes it much easier to reuse the turf elsewhere.

Made from heat-treated (hardened) carbon steel to provide both strength and durability. Powder-coated finish provides improved resistance to rust, scratches, humidity and alkaloids in the soil. Fitted with an ergonomically designed, European ash, T-grip handle, supplied from FSC sustainable resources and lacquered for protection against the weather. The handle has been designed to reduce fatigue and back strain and is an indispensable aid when lifting turf to be moved and re-laid.

The Countryman Range has been designed for the gardener who requires a tool they can rely on to provide years of dependable service.

Overall Length: 1330mm
Blade Width: 215mm

PTDFAICOUTURF

Reisser R2 professional woodscrews are high performance woodscrews. Consistent quality ALWAYS!

• Very sharp 25 deg point with the thread running to the end allowing immediate starting, no need to pre-start.
• The sharp, wide, deep thread penetrates into all timbers WITHOUT a pilot hole, giving exceptional pull-out.
• Specially hardened steel gives the R2 maximum tensile and torsional strength.
• The invisible Reisser lubricant helps the screw drive in quickly and easily.
• The re-inforced collar under the head gives additional support preventing snapping.
• The collar also allows a wide, deep pozi to be inserted. This reduces the risk of the bit jumping out and rounding off the edges.
• Each bath checked thoroughly to guarantee consistency of quality.
• Yellow tropicalised giving approximately 20 times more rust resistance than standard BZP screw Bulk Box

PTDGRPREI9200S22030010B

New from Reisser, the Mega Bulk Tubs offer greater savings on your favourite Cutter screw sizes.

PTDGRPREI8221440MT

The Faithfull Countryman Long Handle Bulb Planter is a heavy-duty tool designed for the professional gardener. Ideal for planting larger bulbs by boring a hole into the ground to the desired depth using the barrel of the planter, inserting the bulb and then placing the plug of soil back into hole.

Made from heat-treated (hardened) carbon steel to provide both strength and durability. Powder-coated finish provides improved resistance to rust, scratches, humidity and alkaloids in the soil.

Fitted with a long European ash T-grip handle supplied from FSC sustainable resources and lacquered for protection against the weather. The Long Handle Bulb Planter will save your back as no digging is required and also allows you to penetrate through tough or firm soil using your foot to provide leverage.

Mainly used in September and October when planting spring flowering bulbs such as daffodils, tulips and alliums or in May when planting summer bulbs such as gladioli.

The Countryman Range has been designed for the gardener who requires a tool they can rely on to provide years of dependable service.

PTDFAICOUBULB

The Faithfull Essentials Long Handle Bulb Planter has a forged head with foot treads, manufactured from heat-treated (hardened) carbon steel to provide both strength and durability. The polypropylene and powder-coated finish provide improved resistance to rust, scratches, humidity and alkaloids in the soil.

The long T-grip handle is manufactured from tubular steel with a hard-wearing polypropylene coating, making it comfortable to use. It enables full control of the blade position to ensure a precise edge is created.

It has been designed for the professional gardener. Use for planting larger bulbs by boring a hole into the ground to the desired depth using the barrel of the planter, inserting the bulb and then placing the plug of soil back into the hole. The long-handled bulb planter will save your back as no digging is required and also allows you to penetrate through tough or firm soil using your foot to provide leverage.

Mainly used in September and October for planting spring flowering bulbs (daffodils, tulips, alliums, etc.) or in May when planting summer bulbs (gladioli, etc.)

Overall Length: 960mm
Head Diameter: 70-83mm

PTDFAIESSBULB

The Stabila R-Type Levels have been developed for the toughest building site conditions. They are extremely robust, with an innovative 5 chamber aluminium R-profile with torsion rigidity. In addition, the levels have removable and shock-resistant end caps with patented Stabila non-slip stoppers.

The levels have an extra wide measuring surface (4cm), making them extremely stable and ensuring that they do not tip over during measuring. Three clearly guided marking edges, along with a web over the horizontal vial, allow marking or cutting over the full profile length.

The R-shape of the profile provides a comfortable grip, acting as a finger groove over the full length. This allows perfect handling during measuring and transport.

Measurement Accuracy:
In normal position: 0.029 = 0.5mm/m.
Overhead Measurement: 0.029 = 0.5mm/m.

The Stabila R-Type 300 Spirit Level Set contains the following:

1 x R-Type 300 Spirit Level 3 Vial 61cm (24in)
1 x R-Type 300 Spirit Level 3 Vial 122cm (48in)
1 x R-Type 300 Spirit Level 3 Vial 183cm (72in)

PTDSTBRTYPESET

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

The Stabila 96-2 Level Pack contains the following:

1 x 96-2-60 Spirit Level 3 Vial 15226 60cm.

1 x 96-2-120 Spirit Level 3 Vial 15229 120cm.

1 x 96-2-180 Spirit Level 3 Vial 15230 180cm.

PTDSTB962SET

ARKMARK is a complete door utility tool, created for marking architrave, door hinges and
margin gaps around doors. Its unique design allows you to mark what you require with
great speed and accuracy. Each package contains 3 sizes of 5mm, 7mm, 9mm and colour
coded for ease.

ARKMARK offers the following benefits:

• Marks architrave and hinges in seconds
• Small and compact
• No adjustment needed
• One hand operation
• Fits behind pre-hung doors
• Marks 3 inch; 4 inch butt hinges
• Margin gaps around door
• It can mark hinge heights on doors and frames
• Very durable
• Colour coded for easy identification.

Its the door utility tool that you cant be without....

PTDARKMARK