SDS Plus Hammer Drills

The Metabo KHE 3251 3-Mode SDS Plus Hammer Drill has a compact L-Shape design, low weight and perfect balance. Featuring the Metabo trademark aluminium gear housing, vibration damped back handle with a large trigger.

The rotatable carbon brush bridge provides 100% power in forward and reverse, this machine delivers excellent power and speed to get the job done.

Specification

Modes: Rotary, SDS Plus Hammer and Chisel Only.
Input Power: 800 Watt.
No Load Speed: 1,150/min.
Impact Rate: 4,470/bpm with 3.1 Joules.
Capacity: Concrete 32mm, Steel: 13mm, Wood: 35mm.
Weight: 3.5kg.

PTDGRPMPTKHE3251

The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability.

The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application.

Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case.

Specification

Mode: Rotary, SDS Hammer, Chisel Only
Input Power: 710W
No Load Speed: 0-1,550/min.
Impact Rate: 0-5,680/bpm, 2.0 joules
Capacity: Wood 30mm, Steel 13mm, Concrete 22mm, Core 50mm
Toolholder: SDS
Weight: 2.5kg

PTDGRPDEWD25033K

The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications.

The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application.

Suitable for the following applications:
Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing.
Drilling through holes in masonry to house pipes and cables.
Light chipping in brick or masonry
Tile removal from kitchens and bathrooms.
Small channelling in brick.
Mortar and plaster removal.
Some drilling in wood and steel.

Supplied with:
1 x Multi-position rubber side handle
1 x Depth stop
1 x Heavy-duty carrying case.

Specifications:

Mode: Rotary, SDS Hammer, Chisel Only
Input Power: 800W
No Load Speed: 0-1,500/min.
Impact Rate: 0-5,550/bpm, 2.6 joules
Capacity: Wood 30mm, Steel 13mm, Concrete 26mm, Core 50mm
Toolholder: SDS Plus
Weight: 2.3kg

PTDGRPDEWD25133K

The DEWALT D25134K SDS 3-Mode Hammer is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability.

The D25134K Hammer comes with a quick-change removable chuck for drilling in wood, steel and ceramic and for screwdriving applications. It has a mechanical clutch which eliminates sudden high-torque reaction, should the bit jam. The electronic variable speed provides total control in any application.

The hammer has rubber coated back and side handles for improved comfort in use. Its rounded ergonomic industrial design allows easy and comfortable handling in any application.

Supplied with: 1 x Quick Change 13mm Keyless Chuck, 1 x Multi-Position Rubber Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case.

Specification:

Mode: Rotary, SDS Hammer, Chisel Only
Input Power: 800W
No Load Speed: 0-1,500/min.
Impact Rate: 0-5,540/bpm, 2.8 joules
Capacity: Wood 30mm, Steel 13mm, Concrete 26mm,
Core 65mm
Toolholder: SDS Plus
Weight: 3.0kg

PTDGRPDEWD25134K

The Bosch GBH 4-32 DFR 4KG SDS Plus Hammer is the fastest multi-hammer in the 4kg class. Offers a wide range of applications in chiselling and drilling work and when working with a core cutter. Drills up to 30% faster (25mm diameter) than other tools in its class. Low vibration levels of only 10 m/s for less tiring work due to Bosch Vibration Control. Extremely robust due to the aluminium gear housing. Offers fast changing between SDS-plus and keyless chuck for drilling in wood and metal. It has a compact design for perfect handling.

Supplied with: 1 x Auxiliary Handle, 1 x 310mm Depth Stop, 1 x 13mm Keyless Chuck, 1 x SDS Plus Quick-Change Chuck and 1 x Carrying Case.

Specification

Input Power: 900 Watt.
No Load Speed: 0-800/min.
Impact Rate: 0-3,600/bpm.
Impact Energy: 4.2 Joules.
Drilling Capacity: Concrete (Hammer Drill Bits): 6-32mm, Masonry (Core Cutters): 90mm, Steel: 13mm, Wood: 32mm.
Optimum Range: Concrete (Hammer Drill Bits): 14-25mm.
Weight: 4.7kg.

Noise/Vibration Information

Measured values determined according to EN 60745. Total vibration values (vector sum of three directions).

Chiselling
Vibration Emission Value ah: 9.0 m/s.
Uncertainty K: 1.5 m/s.

Hammer Drilling in Concrete
Vibration Emission Value ah: 10.0 m/s.
Uncertainty K: 1.5 m/s.

Bosch GBH 4-32 DFR 4KG SDS Plus Hammer 900 Watt 240 Volt Version

PTDBSHGBH432DFR

The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability.

The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application.

Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case.

Specification

Mode: Rotary, SDS Hammer, Chisel Only
Input Power: 710W
No Load Speed: 0-1,550/min.
Impact Rate: 0-5,680/bpm, 2.0 joules
Capacity: Wood 30mm, Steel 13mm, Concrete 22mm, Core 50mm
Toolholder: SDS
Weight: 2.5kg

D25033K SDS Plus 3 Mode Hammer Drill 710W 240V Version.

PTDDEWD25033K

The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability.

The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application.

Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case.

Specification

Mode: Rotary, SDS Hammer, Chisel Only
Input Power: 710W
No Load Speed: 0-1,550/min.
Impact Rate: 0-5,680/bpm, 2.0 joules
Capacity: Wood 30mm, Steel 13mm, Concrete 22mm, Core 50mm
Toolholder: SDS
Weight: 2.5kg

DEWALT D25033K SDS 3 Mode Hammer Drill 710 Watt 110 Volt Version.

PTDDEWD25033KL

The HTC Evolution SDS4-800 SDS Drill, with 4 functions (Drill, Chisel, Rotation & Hammer) and high impact energy of 1.6 joules, is versatile and very effective. The variable speed feature allows for optimum control and the hi-torque 650W motor packs the punch required to drill into tough applications, such as steel, concrete and other masonry.

It is light and portable without losing the key attributes of strength and durability, ideal for daily and extensive use. Other features include an adjustable auxiliary handle making it easy to direct into position, as well as an ergonomic main handle with soft grips for comfort.

Specification:

Input Power: 650W
No Load Speed: 0-1,100/min.
Impact Energy: 1.6 Joules
Capacity: Steel 13mm, Concrete 20mm, Wood 30mm
Recommended Max. Duty Cycle: 30 min
Weight: 3.5kg

Sound Pressure Level (Under Load): LPA = 88.6dB(A); LWA = 99.6dB(A); K = 3dB(A)
Vibration: 4.015m/s
Vibration (K): 1.5m/s

Evolution SDS4-800 4 Function SDS Drill 240V Version

PTDHTCSDS4

The Makita DHR243RMJ SDS Plus 3 Mode Hammer Drill has an efficient brushless DC motor. Has a quick change drill chuck and an easy-to-grip handle ergonomically designed to give maximum power thrust and provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.

The tool body is separated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers. Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures such as terminal breakage or poor electrical contact. Has 3 modes of operation rotation and hammering, hammering only and rotation only.

DHR243RMJ: 2 x 18 Volt 4.0Ah Li-ion Batteries.
DHR243Z: Bare Unit, No Battery or Charger Supplied.

Specification

No Load Speed: 0-950/min.
Blows per Minute: 0-4,700/bpm
Impact Energy: 2.0 joules
Capacity: Concrete 24mm, Steel 13mm, Wood 27mm
Weight: 3.3kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration: Drilling: 3.5 m/sec.
Vibration K Factor: 1.5 m/sec.
Vibration: Hammer Drilling: 13.5 m/sec.
Vibration: Chiselling: 10.5 m/sec.

The Makita DHR243Z SDS Plus 3 Mode Hammer Drill is supplied as a bare unit, NO battery or charger supplied.

PTDMAKDHR243Z

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.

It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.

It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

It is supplied with; a side handle, depth stop, bit grease and a carry case.

Input Power: 850W
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm
Impact Energy: 5.0 joules
Capacity: Concrete 32mm, Core Diameter (TCT) 90mm
Weight: 4.9kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration Drilling: 2.5 m/sec
Vibration Chiselling: 7 m/sec
Vibration Hammer Drilling: 10 m/sec
Vibration K Factor: 1.5 m/sec
Noise Sound Pressure: 89 dB(A)
Noise Sound Power: 100 dB(A)
Noise K Factor: 3 dB(A)

1 x Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V Version.

PTDMAKHR3210C

The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.

It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.

It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

It is supplied with; a side handle, depth stop, bit grease and a carry case.

Input Power: 850W
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm
Impact Energy: 5.0 joules
Capacity: Concrete 32mm, Core Diameter (TCT) 90mm
Weight: 4.9kg

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration Drilling: 2.5 m/sec
Vibration Chiselling: 7 m/sec
Vibration Hammer Drilling: 10 m/sec
Vibration K Factor: 1.5 m/sec
Noise Sound Pressure: 89 dB(A)
Noise Sound Power: 100 dB(A)
Noise K Factor: 3 dB(A)

1 x Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 110V Version.

PTDMAKHR3210CL

The Makita HR3210FCT SDS+ Rotary Hammer Drill with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.

It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

It is supplied with; a side handle, depth stop, bit grease and a carry case.

Specification

Input Power: 850 Watt.
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm.
Impact Energy: 4.9 Joules.
Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.
Weight: 4.9kg.

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration Drilling: 2.5 m/sec.
Vibration Chiselling: 7 m/sec.
Vibration Hammer Drilling: 10 m/sec.
Vibration K Factor: 1.5 m/sec.
Noise Sound Pressure: 89 dB(A).
Noise Sound Power: 100 dB(A).
Noise K Factor: 3 dB(A).

Makita HR3210FCT SDS+ Rotary Hammer Drill With QC Chuck 850 Watt 110 Volt Version.

PTDMAKHR3210FCL

The Makita HR3210FCT SDS+ Rotary Hammer Drill with three drilling modes of operation: hammer drill, rotary drill and hammer only. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling. It is fitted with a quick change chuck and an LED job light.

It features the unique Makita AVT Anti Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.

It is supplied with; a side handle, depth stop, bit grease and a carry case.

Specification

Input Power: 850 Watt.
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm.
Impact Energy: 4.9 Joules.
Capacity: Concrete: 32mm, Core Diameter (TCT): 90mm.
Weight: 4.9kg.

All vibration figures quoted are Tri-axial to EN60745 2006.

Vibration Drilling: 2.5 m/sec.
Vibration Chiselling: 7 m/sec.
Vibration Hammer Drilling: 10 m/sec.
Vibration K Factor: 1.5 m/sec.
Noise Sound Pressure: 89 dB(A).
Noise Sound Power: 100 dB(A).
Noise K Factor: 3 dB(A).

Makita HR3210FCT SDS+ Rotary Hammer Drill With QC Chuck 850 Watt 240 Volt Version.

PTDMAKHR3210FCT

The Sparky BP 330CE SDS+ Rotary Hammer Drill has two mode settings: Hammer Drilling and Chiselling. The drill has has a Magnesium alloy gearbox and a unique high power mode, which delivers up to 4.2 Joules of impact energy. It offers electronic speed pre-selection and has constant electronics with a soft start. For comfortable prolonged use, the BP 330CE SDS Plus Rotary Hammer Drill features an anti-vibration system on both the rear and front handle.

For safety, the drill features:
-Safety clutch.
-LED overload indication.
-LED 8 hour brush wear out indicator.
-Auto-stop brushes.
-Double insulation.

Comes with: 1 x Anti-Vibration Rear Handle, 1 x Anti-Vibration Front Handle, 1 x Depth Gauge, 1 x Tube of Grease, 1 x Cloth and 1 x Carry Case.

Specification

Input Power: 900 Watt.
No Load Speed: 80690/min.
Impact Rate: 1,6402,970/bpm.
Impact Energy: 1.53.3 Joules, High Power: 4.2 Joules, Torque: 60Nm.
Capacity: Concrete: 30mm, Steel: 13mm, Wood: 30mm, Core TCT Cutter Masonry: 80mm.
Weight: 3.9kg.

Sparky BP 330CE SDS+ 2 Mode Rotary Hammer Drill 240 Volt Version.

PTDSPKBP330CE

The Sparky BPR 260E SDS Rotary Hammer Drill has three mode settings: Drilling, Hammer Drilling and Chiselling. The drill has a Magnesium alloy gearbox, a trigger speed control switch and electronic speed pre-selection. For continuous use, the drill has a lock-on switch. The drill is highly efficient in concrete and has forward and reverse action. For comfort, it has an ergonomic soft-grip handle.

For safety, the BPR 261E SDS Rotary Hammer Drill has a number of features, including:
-Hammer stop for Drilling.
-Rotary stop for Chiselling.
-Safety clutch.
-Auto-stop brushes.
-Double insulation.

It comes complete with a carry case, anti-vibration handle, depth gauge and keyed chuck with adaptor.

Specification

Chuck Capacity: SDS PLUS fitting with 13mm keyed chuck & adaptor.
Input Power: 800 Watt.
No Load Speed: 0-1,150/min.
Impact Rate: 0-5,200/min.
Impact Energy: 3.0 Joules.
Capacity: Concrete: 26mm, Steel: 13mm, Wood: 30mm, Core Cutter Masonry: 68mm.
Journal Diameter: 43mm.
Weight: 2.8kg.

Sparky BPR 260E SDS 3 Mode Rotary Hammer Drill 240 Volt Version.

PTDSPKBPR260E