Air Tools - Air Brushes Sprayers & Spraying Equipment

Ideal for the hire trade and professional builders & decorators, this high capacity unit is designed for large surface coverage and will handle most textured wall and ceiling finishes.

- Large capacity 8 litre tough plastic hopper with support handle

- 4 nozzles & 5 spray patterns offer 20 spray combinations

- 45 offset connector for ceiling work

- Air consumption 6 to 25cfm (depending on aircap & nozzle configuration)

PTDCLA5091120

A constant bleed (continuous airflow) sprayer suitable mainly for use with small DIY air compressors with a direct output such as the Clarke Jumbo, Indy and similar models without air receivers. Use for cellulose, varnish, gloss etc.

- Supplied with two 1.3mm internal mix nozzles for fan or round spray effect

- Paint flow adjustment control

- 700ml paint pressure cup

PTDCLA3090065

A small capacity precision sprayer with overhead thumb trigger designed for touch up jobs and other localised paint spraying.

- Professional style 1.8mm external mix spray nozzle

- Separate controls for fan spray and material flow

- Requires 4 to 8 cfm depending on job

- 250ml quick release syphon cup

- BSP air inlet fitting

PTDCLA3090070

A precision built, well balanced sprayer for efficient professional refinishing in factories, auto repair shops etc. The High Volume Low Pressure concept is friendly in terms of both financial and enviromental cost by minimising wasteful overspray.

- Average air consumption 8.8cfm

- Requires a minimum 3hp air compressor for efficient operation

- 2.2mm external mix material nozzle

- 1 litre quick release syphon cup - can also be pressure fed from larger container

- Paint transfer efficiency e

PTDCLA3090100

Finely detailed spray painting made easy with this popular single trigger action, external mix air brush and accessories. For model makers, artists and decorators the possibilities for creative work are limitless.

- Supplied as a kit with two syphon paint jars

- Suitable for a variety of solvent & water based paints

- Spray pattern adjustable from 1/8 to 2

- Kit also includes special lightweight hose, propellant regulator valve & adaptor to BSP

PTDCLA3110310

The professional sprayer has an external paint mix, it also comes with a 1litre syphon cup for cellulose, enamels, polyurethane, acrylics, metallics and all similar viscosity finishes.

- 1.2mm (1hp) min

PTDCLA3090005

A top class sprayer for professionals, producing results of the very highest quality. Superbly finished and precision engineered for perfect atomisation and distribution. Suitable for spraying many materials including cellulose, enamel, metallic and acryl

- Average air consumption 11cfm

- 1.4mm external mix nozzle.

- 1/4 BSP air inlet & 3/8 BSP fluid inlet

- 1 Litre syphon cup included

- Ideally suited for use with air compressors rated 2.5hp or above

- Can be pressure fed via separate paint co

PTDCLA3090050

A full size high specification sprayer suitable for most routine paintwork in spray-booths, workshops and garages. With integral paint volume and fan shape controls, professional results are easily achieved with cellulose, enamels, metalics, acrylics and

- 1 Litre quick release syphon cup

- 1.4mm external mix nozzle

- Average air consumption 7cfm

- Ideally suited for use with air compressors rated 2hp or above

PTDCLA3090010

A full size high specification sprayer suitable for most routine paintwork in spray-booths, workshops and garages. With integral paint volume and fan shape controls, professional results are easily achieved with cellulose, enamels, metalics, acrylics and

- 1 Litre quick release syphon cup

- 1.8mm external mix nozzle

- Average air consumption 8.5cfm

- Ideally suited for use with air compressors rated 2.5hp to 3hp or above

PTDCLA3090015

An efficient and well balanced refinishing sprayer for professionals who prefer a gravity fed unit. The High Volume Low Pressure (HVLP) spray concept is friendly in terms of cost and environment by minimising wasteful overspray.

- 1.4mm nozzle size

- Requires a minimum 3hp air compressor for efficient operation

- Independant controls for variable spray pattern and paint volume

- 600ml nylon gravity cup

- ait inlet connector

- Paint transfer efficiency exceeds Enviro

PTDCLA3090095

Detailed spray painting can be achieved with this finely balanced, precision built airbrush. The double action single trigger gives ultimate control for artistic and creative work; customising, decorating and restoring.

- Working pressure 15 - 50psi

- Supplied with 2 x glass jars with covers, 1 x metal jar, 1 x lightweight air hose with BSP adaptor

PTDCLA3110320

A professional quality HVLP sprayer, featuring adjustable spray pattern and volume controls to suit various applications. Fed by gravity, this sprayer allows for high atomization with lower air pressure that produces less overspray, mess and wastage.

- Requires a minimum of 3hp compressor for efficient operation

- 1.7mm External Mix Nozzle

- 1 Litre Container

- Separate controls for varying spray pattern and paint volume

- BSP air inlet

- Weight: 887g

PTDCLA3082100

The AP8GFM Professional Gravity Fed LVMP Mini Sprayer is designed for smaller jobs where a lower volumes of material are required. Featuring an 0.8mm nozzle and spray pattern and paint volume controls that allow for precise, accurate spraying with minimum

- Requires a minimum of 3hp compressor for efficient operation

- 0.8mm nozzle

- Cup size 100ml

- Separate controls for varying spray pattern and paint volume

- BSP air inlet

- Weight: 373g

PTDCLA3082110

The AP14GFM Professional Gravity Fed LVMP Sprayer provides increased paint transfer efficiency, working speed and higher viscosity paint performance than HVLP models. Featuring an 1.4mm nozzle and spray pattern and paint volume controls that allow for pre

- Requires a minimum of 3hp compressor for efficient operation

- 1.4mm nozzle

- Cup size 600ml

- Separate controls for varying spray pattern and paint volume

- BSP air inlet

- Weight: 767g

PTDCLA3082125

The AP8GF Professional Gravity Fed HVLP Mini Sprayer is designed for smaller jobs where a lower volumes of material are required. Featuring an 0.8mm nozzle and spray pattern and paint volume controls that allow for precise, accurate spraying with minimum

- Requires a minimum of 3hp compressor for efficient operation

- 0.8mm nozzle

- Cup size 100ml

- Separate controls for varying spray pattern and paint volume

- BSP air inlet

- Weight: 373g

PTDCLA3082130