Nailers & Staple Guns (Cordless Gas Pneumatic)

Hi Viz Pro Hose is a lightweight construction air hose, for minimal dragging. Rugged reinforced Polyurethane material resists kinking, tangling or splitting. Built-in snap-fit strain relief fittings on each end. The hose comes complete with couplings compatible with all Stanley Bostitch pneumatic tools and compressors.

Max Operating Pressure: 200 PSI, 13.8 Bar.

PTDGRPBOSPRO1450

The DEWALT DCN681 Cordless XR Brushless Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance.

Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster.

DCN681D2: 2 x 18 Volt 2.0Ah Li-ion Batteries
DCN681N: Bare Unit, No Battery or Charger

Specifcation:

Nail Length: 12-38mm.
Nail Diameter: 1.25mm (18Ga).
Magazine Capacity: 110 Nails.
Magazine Angle: 0.
Weight: 2.6kg.

PTDGRPDEWDCN681D2

The DEWALT DCN682 Cordless XR Brushless Floor Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance.

Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster.

DCN682D2: 2 x 18 Volt 2.0Ah Li-ion Batteries
DCN682N: Bare Unit, No Battery or Charger

Specifcation:

Nail Length: 12-38mm.
Nail Diameter: 1.25mm (18Ga).
Magazine Capacity: 110 Nails.
Magazine Angle: 0.
Weight: 2.9kg.

PTDGRPDEWDCN682D2

The Milwaukee M18 CN16GA Fuel 16G Angled Nailer offers the best-in-class power to consistently seat nails sub-flush to the surface in hardwoods. With Ready to Fire Nail Technology, that eliminates ramp-up time between each nail discharge. No gas cartridges and no cleaning required, designed to deliver durability and reliability to even the most demanding users with very little maintenance.

Offers two work modes, sequential fire for precision or bump fire for speed. With tool-free, quick and easy depth adjustment to assure nails are driven sub-flush. Dry-Fire lockout stops the tool being fired when there are no nails left in the magazine. Offers quick access and easy clearing of jams and an LED work light to illuminate the work surface for better placement of nails.

M18 CN16GA-502X: 2 x 18 Volt 5.0Ah Li-Ion Batteries.
M18 CN16GA-0: Bare Unit, No Battery or Charger.

Specification

Magazine Capacity: 110.
Fires: Nails: Length: 32-63mm. Diameter: 1.6mm.
Magazine Angle: 20.
Cycle Rate: 900.
Weight: 3.3kg.

PTDGRPMILM18CN16G0

The Milwaukee M18 CN18GS Fuel 18G Straight Nailer offers the best-in-class power to consistently seat nails sub-flush to the surface in hardwoods. With Ready to Fire Nail Technology, that eliminates the ramp-up time between each nail discharge. It offers two firing modes: sequential fire for precision or bump fire for speed.

With tool-free, quick and easy depth adjustment to assure nails are driven sub-flush. Dry-Fire lockout stops the tool being fired when there are no nails left in the magazine. There is no gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance. It is also fitted with an LED work light, that illuminates the work surface for better placement of nails.

Flexible battery system; that works with all Milwaukee M18 batteries.

M18 CN18GS-202X: 2 x 18 Volt 2.0Ah Li-Ion Batteries.
M18 CN18GS-0X: Bare Unit, No Battery or Charger.

Specification

Magazine Capacity: 110.
Fires: 18 Gauge Fasteners: 16-54mm.
Max Nail Diameter: 1.2mm.
Collation: Straight.
Firing Mode: Sequential/Bump.

PTDGRPMILM18CN18G0

The Hitachi NR1890DBCL Cordless Framing Nailer with a brushless motor for a longer runtime, less maintenance and increased durability. No air hose or compressor required. Eliminates the cost of fuel cells. Air/spring drive system means less recoil, better flush driving and easier maintenance.

Fitted with a selective activation button; easily choose between sequential or bump fire mode. Also features tool free adjustment of drive depth, a lock switch and 30 minute automatic shutdown for increased safety and longer battery life. The dry fire lockout system prevents nailer from driving when fasteners are low.

Other features include a low battery indicator and pivoting rafter hook.

NR1890DBCL/JP: 2 x 18V 5.0Ah Li-ion Batteries.
NR1890DBCL/W6: Bare Unit, No Battery or Charger.

Specification:

Nail Width: 2.9-3.3mm
Nail Length: 50-90mm
Nail Capacity: 47 Nails
Driving Speed: Up to 2 nails/sec.
Dimensions (LxWxH): 342 x 127 x 309mm
Weight: 4.5kg

PTDGRPHITNR1890DB0

Paslode IM360Ci Framing Nailer 7.2 Volt Li-Ion is the leading cordless nailer powered by an intelligent electronic fuel injection system offering unrivalled cold weather performance. Uses Start and Go technology, and has a fuel and battery gauge with a long life, lithium battery, allowing for outstanding power to weight ratio.

Start and Go is an innovative movement sensor, which prevents battery discharge when not in use. Up to 25% more shots per charge than other Lithium framing tools. Improved aggressive probe allows you to get into tighter angles for easier and more convenient working. Easy use depth adjuster provides tool free depth of drive adjustment

Provides up to 7,500 shots per full charge (1 hour); 6,000 shots in just 30 minutes; 200 shots in just 2 minutes even on the move.

It is supplied with a 7.2 Volt 1.2Ah Li-Ion Battery, Charger, Pair of Safety Glasses (Conform to EN 166: F), an Allen Key, Lubricant, Degreasing Solution and a Heavy-Duty Carry Case.

Specifications:

Brad range: 50-90mm.
Shank Size: 2.8-31mm.
Magazine Angle: 30.
Capacity: 55 nails.
Cycle rate: 2/3 brads/second.
Max. Cycle rate: 1,000/hour.
Fuel Cell Life: Approx 1,250.
Battery: Approx 7,500 fixings per charge.
Weight 3.8kg.

PTDGRPPASIM360CI

The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures.

Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster.

Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second.

DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.
DCN680N: Bare Unit, No Battery or Charger.

Specification

Magazine Capacity: 110.
Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.
Nailer Operating Mode: Bump & Sequential.
Magazine Angle: 0.
Weight: 2.4kg.

PTDGRPDEWDCN680D2

Senco Finish Pro18 Nailer & Compressor Kit allows the user to just plug in and work, containing all you need to get nailing in minutes. Ideal for applications such as trim, beading, upholstery and mouldings.

Comes with:

1 x SENCO Finish Pro 18Mg 18-Gauge Brad Nailer.

It has a lightweight magnesium body that is ultra light, and can drive brads from 15-50mm. Has an oil free design, selective trigger, rear exhaust, and rotating belt hook.

Reg. Operating Pressure: 4.8-8.3 bar.
Air Consumption: 2.4 scfm.
Air Inlet: 1/4in NPT.
Weight: 1.12kg.

1 x SENCO PC1010 3-litre Compressor 1HP.

PC1010 is a compact, ultra-quiet, portable compressor, with a 1HP motor and a 3 litre aluminium tank. Offering portable pneumatic power for a wide-range of applications, including 2nd-fix joinery, upholstery, sheathing, pipe-testing, beading and trim.

Air Displacement: 34 Litres/min.
Max Air Pressure: 8 bar.
Weight: 9.1kg.

Together with these you also get a 1/4in recoil hose, all necessary air fittings, safety glasses, manuals, and a variety pack of 18 gauge brad nails.

All kit contents come with a 1 Year Warranty.

PTDGRPSENPC0964UK1

Senco PC1010 is a compact, ultra-quiet, portable compressor, with a 0.5HP motor and a 3 litre aluminium tank. Offering portable pneumatic power for a wide-range of applications, including 2nd-fix joinery, upholstery, sheathing, pipe-testing, beading and trim.

With its low-noise oil-less motor it is even ideal in domestic situations. Comes with a comfort grip handle, and is designed not to roll about in the back of the van.

The SENCO PC1010 comes in either 110v or 230v.

Comes with a 1 Year Warranty.

Specification

Air Displacement: 34 Litres/min.
Max Air Pressure: 8 bar.
Horsepower: 0.5hp.
SCFM: 90 psi: 0.7.
Pump Up-Time: 0-120 psi: 128 seconds.
Recovery Time: 90-120 psi: 35 seconds.
Max Pressure: 125 psi.
Tank Capacity: 3.8 Litres.
Weight: 9.1kg.

PTDGRPSENPC1010UK1

The Porta-Nails Angled Nailer has a lightweight, durable design. To guarantee that the nails are set properly each time, the ratcheting ram allows for single or multi-hits. The multi-hit function helps to minimise fatigue whilst providing greater impact. Interchangeable shoe attachments (not included) provide multiple flooring options.

The nailer is supplied with:
Extension handle.
Mallet.
Angled shoe for 5/8in - 33/32in tongue and groove flooring.
Wrenches.
Rugged carry case.

Specification

Fastener capacity: 100 x 16 Gauge T Cleats.
Operating pressure: Manual.
Dimensions: 387 x 457 x 76mm.
Weight: 3.63kg.

PTDGRPPOR402A

The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster.

The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time.

DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.
DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.
DCN660N: Bare Unit, No Battery or Charger Supplied.

Specification

Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mm
Magazine Angle: 20.
Magazine Capacity: 110 Nails.
Magazine Loading: Rear Load.
Trigger Type: Bump & Sequential.
Size (LxWxH): 310 x 95 x 305mm.
Temperature Range: -20 to 50C.
Weight: 2.7kg.

PTDGRPDEWDCN660D2

Soft nose for protection of the workpiece. Ideal for delicate work.

PTDGRPBOSPB5101E1

The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods.

The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time.

The DCN692 has a versatile 30-34 magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster.

The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener.

Specification

Input Power: 18 Volt.
Nail Diameter: 2.8-3.3mm.
Nail length: 50-90mm.
Magazine Capacity: up to 55 nails.
Firing mode: Bump and Sequential.
Weight: 4.1kg.

PTDGRPDEWDCN692N

The DEWALT DPC10QTC Mid Pressure Super Quiet Compressor has been designed for framing and finishing applications. It has a durable oil free pump that provides extended maintenance-free operation. The compressor can be operated/stored in either the vertical or horizontal position. With a roll cage and control panel that provides protection to key compressor components.

It has a lightweight, compact design making it easier to carry and store. With dual quick couplers, it can easily support 2 nailers at once. The ball valve drain allows for quick and thorough tank draining with a high-flow regulator for increased performance. Also features a convenient cord wrap for easy storage.

Specification

Input Power: 1,100 Watt, 1.5 HP.
Tank Volume: 10 Litre.
Max Operating Pressure: 200 PSI, 13.8 Bar.
Air Displacement: 119 Litres/min.
Air Delivery: 82 Litres/min.
Pump Type: Oil-Free.
Size (WxLxH): 435 x 538 x 335mm.
Weight: 20.4kg.

Noise LWa 1sd / Uncertainty: 89.0/3.0dB.
Noise LPa 1sd / Uncertainty: 71.5/3.0dB.

PTDGRPDEWDPC10QTC