Cordless Power Tools
- Milwaukee HD18 CS Circular Saw Range
The Milwaukee HD18 CS Circular Saw has a powerful 3,500/min motor that easily cuts most timber construction materials. It has a large 50 degree bevel facility. It is an efficient cordless solution in trimming wood panels and chipboards.
It has magnesium upper and lower guards to provide excellent impact resistance. REDLINK overload protection electronics in the tool and battery pack deliver excellent system durability.
The circular saw gives excellent visibility of cutting line. For safety, it has an electronic motor brake, meaning the saw blade stops within seconds. The ergonomic soft-grip handle provides comfort and balance for superior control.
Supplied with 24 tooth saw blade, parallel guide, dust port and allen key.
No load Speed: 3,500/min.
Max cutting depth 90: 55mm.
Max cutting depth 45: 39mm.
Blade: 165mm, 16mm Bore.
PTDGRPMILHD18CS4Learn MoreMilwaukee M18 HD18 HX SDS Plus Rotary Hammer Range
The Milwaukee HD18 HX M18 compact cordless 18 Volt 3-mode SDS hammer drill has a high powered motor which gives corded tool performance. It has a 4-mode operation: rotary hammer, hammer only, rotation only and variolock for maximum versatility (Variolock and hammer stop function). With FIXTEC system for keyless chuck changing and a mechanical clutch which protects the tool when bit binds up.
The HD18 also has AVS (Anti-Vibration-System) to deliver maximum comfort by minimizing vibration, and a powerful hammer mechanism to deliver 2.4 Joules of impact energy. REDLINK overload protection electronics in tool and battery pack deliver excellent system durability. An all metal gear case allows for optimum seating of the gears for enhanced service life.
M18 HD18 HX-402C: 2 x 18v 4.0Ah Li-Ion Batteries.
M18 HD18 HX-0: Bare Unit, No Battery or Charger.
Tool Holder: SDS-Plus.
Mode: Rotary Hammer, Hammer Only,
No Load Speed: 0-1,400/min.
Impact Rate: 4,200/bpm with 2.4 Joules
Capacity: Wood: 30mm. Steel: 13mm. Concrete: 24mm.
PTDGRPMILHD18XL4Learn MoreMilwaukee M12 CH Fuel SDS Hammer Range
Milwaukee M12 CH-602X FUEL SDS Plus Hammer offers superior power to weight ratio in its class with Milwaukee designed and built brushless POWERSTATE motor for up to three times longer motor life and up to two times more power. REDLINK PLUS intelligence system delivers the most advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load.
Has 2 modes of operation, rotary hammer or rotation only for maximum versatility and optimised hammer drilling of 6 - 10 mm (Max 13mm). Has a low vibration value of 4.3 m/s, an on board fuel gauge and LED light. The 43mm neck size is compatible with M12 DE dust extractor.
REDLITHIUM-ION battery pack delivers twice the run time, up to 20% more power, twice the battery life and operates better down to -20C than other lithium-ion technologies. Individual battery cell monitoring optimises tool run time and ensures long term pack durability
Flexible battery system that works with all Milwaukee M12 batteries.
M12 CH-602X: 2 x 12 Volt 6.0Ah Li-Ion Batteries.
M12 CH-0C: Bare Unit, No Battery or Charger.
Modes: Rotary Hammer, Rotation.
No Load Speed: 0-900/min.
Impact Rate: 0-6,575/bpm.
Impact Energy: 1.1 Joules.
Capacity: Concrete: 13mm, Steel: 10mm, Wood: 13mm.
PTDGRPMILM12CH4FLearn MoreMilwaukee M12 H Compact Cordless SDS 2 Mode Hammer 12 Volt Range
The Milwaukee M12 H Compact Cordless SDS Hammer Drill is a 2 mode drill: hammer drilling and rotary drilling for maximum versatility. It is ergonomically designed, compact and lightweight to allow work in tight spaces with reduced fatigue during use.
REDLINK overload protection electronics in the tool and battery pack deliver excellent system durability. It has low vibration (6.7 m/s) for comfortable use and has an in-built LED light to illuminate the work space in dark areas.
Optimised drilling from 4-8mm, with max drilling of 13mm.
M12 H-402C: 2 x 12v 4.0Ah Li-Ion Batteries.
M12 H-0: Bare Unit, No Battery or Charger.
Modes: Hammer Drilling, Rotary Drilling
No Load Speed: 0-800/min.
Impact Energy: 0.9 Joules
Capacity: Concrete: 13mm Steel: 8mm Wood: 10mm
PTDGRPMILM12H4Learn MoreMilwaukee M12 JS Sub Compact Jigsaw Range
The Milwaukee M12 JS Sub Compact Jigsaw has a hybrid grip design that combines the best features from top grip and barrel grip jigsaw designs to provide superior cut control and balance. It produces minimal vibration during cutting to ensure a ultra smooth finish. A non-marking shoe, comes as standard, protects work surfaces from scratching. The precision roller guide is positioned close to the work piece to provide control and reduce blade deviation.
The compact tool design and intergrated LED improves cut line visibility, even in low levels of light. REDLINK overload electronics deliver excellent durability and electronic variable speed control provides greater flexibility and versatility. Its QUICK-LOK T shank blade clamp allows for secure, tool-free blade and accessory change.
Ideal for carpenters, builder, cabinet/countertop installers, plumbers, electricians, and HVAC professionals for making quick cuts in wood, metal, wall tile, or plastics without the hassle of pulling out a cord. Able to perform plunge and bevel cuts.
Strokes at No Load: 0-2,800/min.
Stroke Length: 19mm.
Capacity: Aluminium: 15mm, Wood: 40mm.
Bevel Capacity: 45.
Weight: 1.8kg (Without Battery).
PTDGRPMILM12JS4Learn MoreMilwaukee M18 BH 2 Mode SDS Hammer Range
Milwaukee M18 BH 2 Mode SDS Plus Hammer with a superior power to weight ratio in its class 1.9kg 1.2 J EPTA. A high performance 4-pole motor delivers maximum power whilst maximising the power to weight ratio. REDLINK overload protection electronics in tool and battery pack deliver best in class system durability.
2 mode operation: choose rotary hammer or rotation only for maximum versatility, and low vibration value of 10 m/s. Optimised hammer drilling from 4 to 10mm, Max diameter 16mm. Has a forward and reverse switch for added versatility in fastening application, and a 43mm neck size that is compatible with the M12 DE dust extractor.
A fuel gauge displays remaining charge, and a bright LED provides workspace illumination.
REDLITHIUM-ION batteries deliver two times more run time, up to 20% more power, and two times more battery life. The battery also operates better at -20C, than any other lithium-ion batteries. Individual cell monitoring optimises tool run time ensuring long term durability.
Flexible battery system that works with all Milwaukee M18 batteries.
M18 BH-402C: 2 x 18v 4.0Ah Li-Ion Batteries.
M18 BH-0: Bare Unit, No Battery or Charger.
Mode: Rotary Hammer or Rotation Only.
No Load Speed: 0-1,200/min.
Impact Rate: 0-6,100/bpm.
Capacity: Wood: 16mm, Steel: 10mm, Concrete: 16mm.
PTDGRPMILM18BH4Learn MoreDeWalt DCS331 XR Premium Jigsaw Range
The DEWALT DCS331 XR Premium Jigsaw is fitted with a powerful & highly efficient PM47 fan-cooled motor, that features replaceable brushes. Delivering a fast cutting action, up to 3000 strokes per minute, maximising user productivity. The intelligent variable speed trigger & lock-off switch provide quick controlled cuts and enhanced work safety. Its 3-position pendulum action controls the aggressiveness or smoothness of cuts.
The tool free adjustable shoe with anti-scratch cover bevels 45, in both directions. Uses a quick and easy patented keyless blade change system, that accepts T-shank blades. Its modular component design provides trouble free servicing whilst the patented anti-vibration counter-balance mechanism and rubber grip providing a smooth operation. There is also a dust blower that keeps line of cut clear of dust and debris.
DCS331M2: 2 x 18V 4.0Ah XR Li-ion Batteries.
DCS331N: Bare Unit, No Battery or Charger.
Strokes No Load: 0-3,000/min.
Stroke Length: 26mm.
Bevel Capacity: 45.
Capacity: Wood: 135mm, Metal: 10mm.
PTDGRPDEWDCS331M2Learn MoreDeWalt DCS391 XR Premium Circular Saw Range
The DEWALT DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change.
It has an extremely durable tool design, including a cast magnesium base, which allows repetitive, accurate cuts. With an ergonomic handle set with rubber overmold, the saw provides optimum comfort to the user. Is an efficient cordless solution in trimming wood panels and chipboards.
DCS391M2: 2 x 18V 4.0Ah XR Li-ion Slide On Battery Packs.
DCS391N: Bare Unit, No Battery or Charger Supplied.
A 165mm Carbide Blade, Hex Key and Dust Port are supplied as standard.
No Load Speed: 5,150/min.
Max. Cutting Depth: at 90: 55mm, at 45: 42.1mm
Blade: 165 x 20mm Bore
PTDGRPDEWDCS391M2Learn MoreDeWalt DCD710 Sub Compact Drill Driver Range
The DEWALT DCD710 Sub Compact Drill Driver has a compact, lightweight design and 15-position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes and LED light for improved visibility.
The 10mm single sleeve keyless chuck has an automatic spindle lock for quick and easy bit change and has two speed settings, variable speed and reverse switch plus all metal gearing for efficient power transmission and long tool life.
DCD710D2: 2 x 10.8 Volt 2.0Ah Li-Ion Batteries.
Chuck: 10mm Keyless.
No Load Speed: 0-400/0-1,500/min.
Max Torque: 16Nm, 15 Settings.
Capacity: Wood: 19mm, Steel: 10mm.
PTDGRPDEWDCD710S2Learn MoreDeWalt DCD740 XR Angle Drills 18 Volt Range
The DEWALT DCD740 is a powerful 18 Volt XR Li-Ion compact lightweight Angle Drill Driver featuring the NEW XR Li-Ion battery technology. Ultra compact, lightweight design which allows for drilling and screwdriving applications in confined spaces. The multi grip trigger provides comfort and convenience by allowing the user to operate the trigger from various positions.
The all metal gearing and right angle transmission gives increased runtime and longer tool life. Also has a bright white LED with delay feature for improved visibility and flashlight functionality.
DCD740C1: 1 x 18v 1.5Ah Li-Ion Battery.
DCD710N: Bare Unit, No Battery or Charger.
Chuck Capacity: 10mm Keyless.
No Load Speed: 1,800/min.
Max Torque: 35Nm.
Capacity: Wood: 25mm, Steel: 10mm.
PTDGRPDEWDCD740C1Learn MoreHitachi C18DSL Circular Saw Range
The Hitachi C18DSL 165mm Circular Saw has a multiplex protection circuit to maximise battery life. It is an efficient cordless solution in trimming wood panels and chipboards. A transparent blade guard offers protection without minimising sight of the cut line.
The saw has an electric brake to ensure operator safety and its slimline blade (1.6mm kerf) reduces battery drain to maximise cutting time. A spotlight illuminates the cut line, thus improving visibility, and the no riving knife means easier plunge cutting.
Compatible with Hitachi slide batteries.
C18DSL: 2 x 18 Volt 5.0Ah Li-Ion Batteries.
C18DSL4: Bare Unit, No Batteries or Charger.
No Load Speed: 3,400/min.
Max Cutting Depth: at 90- 57mm, at 45- 40mm.
Blade Diameter: 165mm x 30mm bore slimline.
Overall Length: 365mm.
PTDGRPHITC18DSLLearn MoreHitachi CJ18DSL Jigsaw Range
The Hitachi CJ18DSL Jigsaw has a 3 stage orbital action and variable speed motor that increases cutting efficiency and also allows the user to select the aggressiveness of the cut based on the material or application. The adjustable base provides durability and bevels 45 to the right and left to assist in different cutting applications.
The tool less blade change system allows the blade to be changed quickly and easily. Its powerful dust blower pushes sawdust and chips away from the cutting path for a cleaner, more visible work surface. Other features include a LED spotlight and soft grip handle.
HITCJ18DSL: 2 x 18 Volt 5.0Ah Li-Ion Bateries.
HITCJ18DSL4: Bare Unit, No Battery or Charger.
Strokes No Load: 0-2,400/min.
Stroke Length: 26mm.
Base Tilt Angle: 45 Right/Left.
Capacity: Wood: 135mm, Metal: 10mm.
Minimum Cutting Radius: 25mm.
PTDGRPHITCJ18DSLLearn MoreHitachi DV18 DSDL18 Volt Combi Drills Range
Hitachi DV18DSDL/JW 18 Volt Combi Drill with Li-Ion Batteries. A new design Combi drill with high capacity Li-Ion batteries which offer 33% increase over previous battery capacities. The multiplex protection circuit for maximum battery life and the batteries are the same size and weight as 3.0Ah Li-Ion battery.
The drill offers an extremely high maximum torque of 92Nm, with lightweight slide-in Li-Ion batteries, a 2 speed gearbox to suit most applications, raised body mouldings for extra protection against dust and dirt and a slimline soft-grip handle. Also with forward and reverse switch, white LED spotlight which illuminates workpiece, battery level indicator, 13mm metal chuck with ratcheting lock, spindle lock and a metal belt clip which can be fitted for right- or left-handed use.
DV18 DSDL5: 2 x 18 Volt 5.0Ah Li-Ion Batteries.
DV18 DSDL4: Bare Unit, No Battery or Charger.
No Load Speed: 0-400/0-1,800/min.
Impact Rate: 0-6,000/0-27,000/min.
Max Torque: 92Nm.
Capacity: Wood: 65mm, Steel: 13mm, Masonry: 16mm
PTDGRPHITDV18DSDLLearn MoreMilwaukee C12 RAD-202C Compact Right Angle Drill Range
The Milwaukee C12 RAD Compact Cordless Right Angle Drill has a compact and lightweight design. Ideal for work in narrow and confined spaces, such as between joists. Also with a bright LED light to illuminate the working area.
The drill has a long soft grip for comfortable working in any situation. The 10mm single sleeve chuck allows quick and easy change of a full range of accessories. REDLINK overload protection electronics in the tool and battery pack deliver excellent durability.
The C12 RAD has heavy-duty full metal gearbox and gears for superior durability and maximum torque. Its slimline soft-grip handle provides comfortable use.
C12 RAD-202C: 2 x 12v 2.0Ah Li-Ion Batteries.
C12 RAD-0: Bare Unit, No Battery or Charger.
No Load Speed: 0-800/min.
Max Torque: 12Nm.
Capacity: Wood: 22mm, Steel: 10mm, Wood Screws (Without Pre-Drilling): 6.5mm.
PTDGRPMILC12RAD2Learn MoreDeWalt DCD785 XR Compact Hammer Drill Driver 18 Volt Range
The DEWALT DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. A 14 position, adjustable torque control enables consistent screwdriving into a variety of materials with different screw sizes.
It is fitted with a compact 13mm single sleeve keyless chuck with automatic spindle lock that ensures a quick and easy, one-handed bit change. Improved ergonomic design and rubber grip improves user comfort and the bright white LED with delay feature for improved visibility and flashlight functionality.
Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
Supplied with a Belt Hook and a Magnetic Bit Holder as Standard.
DCD785M2: 2 x 18 Volt 4.0Ah XR Li-Ion Batteries.
DCD785M1: 1 x 18 Volt 4.0Ah XR Li-Ion Battery.
DCD785C2: 2 x 18 Volt 1.5Ah XR Li-Ion Batteries.
DCD785N: Bare Unit, No Battery or Charger.
Chuck: 13mm Keyless
No Load Speed: 0-600/0-2,000/min.
Impact Rate: 0-10,200/0-34,000/bpm
Max. Torque: 60Nm, 14 Settings
Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm
PTDGRPDEWDCD785M2Learn MoreCordless Power Tools
VAT Number: 100 5143 84