Power Tools

The SIP Valeting Detergent is a heavy-duty, concentrated, and low foam cleaner specially designed for the cleaning and removal of soiling from carpets and upholstery. Available in 5 litre bottles.Heavy-duty and low foam concentrated cleanerSpecially formulated for the cleaning and removalof soiling from carpets, fabrics, and upholsteryLightly perfumed, economical and rapid in useSuitable for all SIP cleaning equipment andpressure washers with detergent facilitiesAvailable in 5 litre bottles

PTDSIP02402

The Milwaukee M12 BPS Cordless Polisher/Sander has a variable 2 speed selection for both polishing and sanding applications. It has a compact design, only 130mm, which allows access to hard to reach areas and a spindle lock allows for fast, tool-free accessory change.

It has a large capacity of up to 76mm polishing sponge and 50mm sanding pad size, for fast job completion and comes with a detachable 2 position side handle. It is capable of a long run time allowing frequent task completion with one battery charge.

It is fitted with REDLINK overload protection electronics in the tool and battery pack that delivers best in class system durability and individual battery cell monitoring optimises tool run time and ensures long term pack durability.

M12BPS-412X: 1 x 12 Volt 4.0Ah and 1 x 12 Volt 2.0Ah Li-ion Battery.
M12BPS-0: Bare Unit, No Battery or Charger Supplied.

Specification

Oscillating Speed: 0-2,800/0-8,300/min.
Disc Diameter: 76mm
Spindle: M9 x 0.75
Weight: 1.0kg

PTDGRPMILM12BPS0

The DEWALT DWE315KT corded Multi Tool has a powerful 300 Watt motor and superior ergonomics to offer comfortable use. For ease of use, it features quick accessory change and adjustment, requiring no Hex Key.

The variable speed trigger provides ultimate control. It is supplied with a tough, durable T-STAK Kit box, and a 37-piece accessory set that contains:

1 x Oscillating Wood with Nails Blade.
1 x Oscillating Fastcut Wood Blade.
1 x Oscillating Wood Detail Blade.
1 x Oscillating Semi Circle Wood Blade.
1 x Oscillating Semi Circle Grout Removal Blade.
1 x Oscillating Rigid Scraper.
1 x Oscillating Sanding Plate.
25 x Sanding Sheets (Assorted Grades).
1 x Universal Adaptor.
2 x Hex Keys: 3mm and 5mm.
1 x Dust Extraction Adaptor.
1 x Depth stop / straight cut guide.
1 x T-Stak Kit Box.

Specifications:

Input Power: 300 Watt.
No Load Speed: 0-22,000/min.
Weight: 1.5kg.

PTDGRPDEWDWE315KT

The Milwaukee PLH 28XE 28mm SDS Plus 3 Mode Hammer is a tough, durable hammer with an excellent drilling performance in concrete thanks to its high torque motor and gears. It has an impressive 4.8 joules of single blow energy, the 800 Watt motor combined with optimised drilling speed results in unsurpassed drilling performance.

It offers excellent balance and handling due to its compact L-shape design and is fitted with a dual patent pending AVS (Anti Vibration System) and a soft grip, anti-vibration handle. The reliable safety clutch protects the machine and user whilst the Roto-Stop and Variolock provide maximum control when doing light chiselling work.

Includes a fast FIXTEC adaptor and 13mm full metal Rohm chuck

It is compatible with the M12 Dust Extractor and is supplied with a carry case.

Specification

Modes: Rotary Drill, Hammer Drill, Hammer Stop.
Input Power: 800 Watt.
No Load Speed: 0-1,000/min.
Impact Rate: 0-4,000/min with 4.8 Joules.
Capacity: Concrete: 28mm, Wood: 40mm, Steel: 13mm
Weight: 3.7kg.

PTDGRPMILPLH28XE

The DEWALT DWV901L Compact Wet & Dry Dust Extractor features an innovative dual filter cleaning system that maintains performance during tough applications. The filter is automatically cleaned every 30 seconds reducing filter clogging and delivering a constant air flow. It is L Classified to meet EU legislation.

The vacuum offers constant suction power even with the finest concrete and wood dust. It has a durable tank construction suitable for tough wet and dry jobsite applications. It is fitted with a built-in power take off socket that allows a power tool to be connected for automatic switching of the vacuum system, when the power tool is operated. The machine continues to run for an extra 15 seconds to allow all dust to be cleared from system.

It is supplied with a 4.0m x 32mm extraction hose, a 35mm AirLock adaptor and a dust bag.

Specification

Input Power: 1,400 Watt.
Power Take Off Rating: 1,800 Watt.
Capacity: Wet: 17.5 Litre, Dry: 30 Litre.
Max Air Flow: 4080l/min.
Weight: 9.5kg.

PTDGRPDEWDWV901L

The Flex Power Tools VCE 26 L MC Safety Vacuum Cleaner is fitted with a manual filter cleaning system that has a handy and compact design making it easy to use and transport. The high performance turbine ensures both a high suction capacity and a high vacuum, giving an excellent extraction result. By using manual filter cleaning, the dust deposited in the filter element is quickly removed with a targeted blast of air.

Levels are monitored to prevent malfunctions when drawing in liquids, thanks to the installed float valve. The soft start feature stops any voltage peaks at the start and the run-on feature (5 Sec. Overrun) empties any remaining dust in the hose. It can also be used as a dust extraction unit thanks to its appliance socket and electronic automatic on/off system.

Other features include: large wheels with two swivel guide rollers, a blowing function, suction control that varies depending on the attached power tool, accessory storage on the back of the vacuum and a filter bag made from tear-proof fleece for optimum filling.

Supplied with: 1 x Suction Hose 32mm x 3.5m with Elbow, 1 x Filter Element Class L/M, 2 x 0.5m Aluminium Suction Tubes, 1 x Combination Floor Nozzle, 1 x Round Brush, 1 x Crevice Nozzle, 1 x Upholstery Nozzle, 1 x Filter Bag, 1 x PR Waste Disposal Bag, 1 x Suction Pipe Holder, 1 x Cable Hook, 1 x Flexible Hose Strap for Hose Holder, 1 x Rubber Tool Brush and 1 x Box for Accessories Holder.

Safety vacuum cleaner, approved for dust class L, suitable for all dust with OEL value >1 mg/m.

Specification

Input Power: 1,250 Watt.
Power Take Off: 100-2,600 Watt.
Capacity: Wet: 16 Litres, Dry: 25 Litres.
Max Air Flow: 3,600l/min.
Max. Vacuum: 21,000 Pa.
Filter Surface: 3,000cm.
Size (W x L x H): 397 x 377 x 533mm.
Weight: 8.4kg.

PTDGRPFLXVCE26L

The Hitachi SB10V2 100mm Belt Sander is fitted with electronic speed control that provides a variable working speed and a large trigger for easy operation. The dust bag is mounted on the left for easier sanding in corners and the transparent cover makes the sanding position clearly visible.

Other features include a tracking adjustment knob for belt alignment, a lock on button, soft grip handle and an efficient dust collection system.

It is supplied with a sanding belt and dust bag.

Specification

Input Power: 1,020W
Belt Speed: 240-420/min.
Belt Size: 100 x 610mm
Weight: 5.2kg

PTDGRPHITSB10V2

The DEWALT DWE6005 Variable Speed Laminate Trimmer has an especially small radius for chamfers and shaping edges. Its lightweight design makes it ideal for one handed use and accurate work.

The copy follower system with 10mm ball bearing, provides comfort and precision. It has a spindle lock mechanism for quick and easy cutter changes with a single spanner. Variable speed control 16,000 - 34,000 rpm, enables the router bit to be optimised for precise applications.

Its D-Base design to allow the user maximum support on the workpiece. Has a depth ring and clamping mechanism combination to give the user an accurate depth of cut adjustment. The LED light gives the user increased visability. Clear base gives the user a clear line of sight to cutter & workpiece.

Comes with a 17mm spanner and a dust extraction adapter.

Specification

Input Power: 590W
Collet Size: 6mm (1/4in GB / LX)
No Load Speed: 16,000 - 34,000/min.
Plunge Stroke/Movement: 22mm
Max. Cutter Diameter: 29mm
Weight: 1.5kg

PTDGRPDEWDWE6005

The DEWALT DWE7491 250mm Table Saw has a lightweight design and optimised footprint, making this the most portable saw in its class. With a steel roll cage to protect the saw against jobsite drops and impacts. Rack and pinion fence system, front and rear fence lock and large, clear scales combine to give an extremely accurate and easy to use saw. It has a powerful 2,000W motor for high performance in all applications.

Fence system provides 410mm of rip capacity in a portable design for cutting large sheet materials to size. The cast table top design ensures accuracy and precision. Overload protection system ensures powerful performance in hard, wet or frozen woods. Fitted with a quick bevel lock with large scale for easy, accurate adjustments.

Supplied with: 1 x 250mm SERIES 30 Blade 24 Tooth Saw, 1 x Mitre Fence, 2 x Blade Spanners, 1 x Parallel Fence, 1 x Dust Port Reducer and 1 x Push Stick

Specification

Input Power: 2,000W
No Load Speed: 3,800/min.
Blade: 250 x 30mm Bore
Ripping Capacity: Right: 825mm, Left: 558mm
Depth of Cut: at 90: 77mm, at 45: 57mm
Bevel Capacity: -3 to 48
Table Size: 670 x 630mm
Weight: 26.6kg

PTDGRPDEWDWE7491

The Kew Nilfisk Alto Aero 26-21PC Professional Wet & Dry Vacuum with auto power tool take off (Max 1800 watt), exhaust air blow function, 25l polypropylene canister with lifting handle and a Push & Clean semi automatic filter cleaning system for longer operating times. The vacuum has an on board storage for tube, hose, cable and accessories.

Supplied with: 1 x Washable PET Cartridge Filter, 1 x Fleece Filter Dust Bag, 1 x 3.5m x 36mm Suction Hose, 1 x 2 Piece Stainless Steel Suction Tube, 1 x Wet & Dry Floor Nozzle, 1 x Universal Nozzle, 1 x Brush Nozzle, 1 x Crevice Tool and 1 x Power Tool Adaptor With Suction Regulator.

Specification

Input Power: 1,250 Watt.
Power Take Off: 1,800 Watt.
Capacity: Wet/Dry: 25 Litres.
Air Flow Rate: 3,600 l/min.
Vacuum: 210/21 mbar/KPA.
Working Sound Level: 64 DB-A.
Dimensions: 375 x 390 x 530mm.
Weight: 9kg.

PTDGRPKEWAERO2621