Lockout - Tagout Products

ABUS 701 and 702 series lock Off hasps, all steel construction and corrosion protected. Hasp accepts up to 6 41, 72 or T84 colour coded padlocks (padlocks not included)

Where to use:

Often called safety lock offs, they are used in industry by maintenance fitters to isolate electrical switch gear or valves. Each fitter has his own colour coded padlock and the switch grear cannot be restarted until all the fitters are clear of the machinery.

PTDGRPABU701R

The Masterlock Zenex Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle.

They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance.

The lockout padlock has a Zenex, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 C to +177 C. The body sides and faces can be laser-engraved for permanent identification.

Includes Danger and Property of padlock labels. Key retaining, supplied with a single key.

PTDGRPMLKS406RED

The Master Lock Lockout Gate Valve Cover has Zenex composite body, which withstands chemicals and extreme temperatures ranging from -57 C to +177 C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes.

The Centre knockout can be removed for rising stem gate valves.

Device can be locked with up to 2 padlocks.

Danger DO NOT OPERATE label supplied.

PTDGRPMLKS480

These Master Lock Lockout Electrical Plug Covers surround the electrical plug and prevent accidental reconnection. Rotating design enables installation in confined spaces.

Zenex construction withstands chemicals and extreme temperatures ranging from -57C to +177C

DANGER - DO NOT REMOVE tag included

*padlock not included

PTDGRPMLKS487

Master Lock Grip Tight circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel.

PTDGRPMLKS491B

ABUS 702 Series lock off hasps, all steel construction and corrosion protected. Hasp accepts up to 6 x 41,72 or T84 series colour coded padlocks (padlocks not included).

Often called safety lock offs they are used in industry by mantenance fitters to isolate electrical switch gear or valves.

PTDGRPABU702R

The ABUS V4 Ball Valve Lockout Series prevents access to ball valves during maintenance and is best used on hard-to-reach pipes. The locks are made from powder coated steel making them stable and secure. There are a number of holes for exact positioning of the padlock giving more stability.

There are two sizes for most common ball valves.

PTDGRPABU00299

The ABUS Safelex Universal Cable Lockout device is perfect for locking out different energy sources during maintenance. There is a patented grip mechanism for secure fixation of the cable and retightening is possible at any time, even when locked.

There is an isolated, exchangeable metal cable, that comes in a variety of lengths and can be interchanged. It holds up to 6 padlocks.

Locking Points: 6.
Cable Diameter: 4.1mm.
Shackle Diameter: 9mm.
Length: 128mm.
Width: 61mm.
Depth: 26mm.

PTDGRPABU00347

The ABUS Standard Cable is a universal lockout device for locking out different energy sources during maintenance. It holds up to 6 padlocks and has an isolated, exchangeable metal cable that comes in different lengths.

Locking Points: 6.
Shackle Diameter: 7mm.
Cable Diameter: 4.1mm.
Length: 128mm.
Width: 61mm.
Depth: 16mm.

PTDGRPABU00355

The ABUS Gate Valve Lockout Device is used to control access to gate valves during maintenance. They are made from high-quality polypropylene that is long-lasting, robust and non-conductive.

They can hold 1 padlock and have a unique, predetermined breakout point at the top for valves with thread. Supplied with stickers in various languages.

PTDGRPABU00362

ABUS Plug Lockout Devices block access to power plugs during maintenance and there are cable tunnels at the sides to secure the plug connections. They are made from high-quality polypropylene that is long-lasting, robust and non-conductive.

Comes with warning stickers in different languages.

P110: Plug Lockout Device Small For Regular Plugs.
P550: Plug Lockout Device Large for High-Voltage Plugs.

PTDGRPABU00450

The ABUS Ball Valve Lockout Devices block the most common ball valves and have well-positioned padlock holes for better grip on the valve. They are made from high-quality polypropylene that is long-lasting, robust and non-conductive.

Two sizes are available for ball valves from 10mm (small) to 24mm (large).

PTDGRPABU00452

Master Locks range of READY TO GO Lock out kits are quick and practical solutions to give you the right range of lock out equipment to get the job done straightaway! Each kit has the right mix of products for specific uses.

The Master Lock Electrical Lockout / Tagout Safety Series Kit has everything an electrician will need for a safe and secure job. It comes with a wearable pouch, which makes it practical and portable. The pouch combines and organises the electrical lockout devices and has a single compartment with a hook and loop belt loop.

The kit follows OSHA LOTO standards and 17th edition BS7671 regulations in the UK.

Contains the Following:

2 x S32KARED Zenex Keyed Alike Padlocks
1 x 2390 Lockout Mini Circuit Breaker Standard Toggles
1 x 2391 Lockout Mini Circuit Breaker Wide Toggles
1 x 2392 Lockout Pin-in External Access Circuit Breaker
1 x 2393 Universal Mini Circuit Breaker
1 x 491B Lockout Circuit Breaker, Wide/Tall Toggles
2 x Lockout Warning Equipment Tags

PTDMLKSELECKIT

Master Locks range of READY TO GO Lock out kits are quick and practical solutions to give you the right range of lock out equipment to get the job done straightaway! Each kit has the right mix of products for specific uses.

The Master Lock General Maintaince Lockout / Tagout Kit has been designed with a maintenance engineers requirements in mind. The kit includes universal lockouts for electrical and valve isolation. It comes with a wearable pouch, which makes it practical and portable. The pouch combines and organises the electrical lockout devices and has a single compartment with a hook and loop belt loop.

Contains the following:

2 x S32KARED Zenex Keyed Alike Padlocks
1 x 2390 Lockout Mini Circuit Breaker Standard Toggles
1 x 2391 Lockout Mini Circuit Breaker Wide Toggles
1 x 2392 Lockout Pin-in External Access Circuit Breaker
1 x 2393 Universal Mini Circuit Breaker
1 x 491B Lockout Circuit Breaker, Wide/Tall Toggles
4 x 493B Lockout Circuit Breaker, Standard Toggles
1 x S806 Adjustable Lockout Cable
1 x 428 Lockout Nylon Hasp - Non Conductive
2 x Do Not Operate Tags

PTDMLKSMAINTKIT

ABUS 701 series lock Off hasps, all steel construction and corrosion protected. Hasp accepts up to 6 41, 72 or T84 colour coded padlocks (padlocks not included)

Where to use:

Often called safety lock offs, they are used in industry by maintenance fitters to isolate electrical switch gear or valves. Each fitter has his own colour coded padlock and the switch grear cannot be restarted until all the fitters are clear of the machinery.

Specification

Length: 128mm
Width: 45mm
Staple bore: 9mm
Switch Size: 25mm (1in)

PTDABU701R