Riveting & Soldering
- Arrow RL100S-6 Single Rivet Tool ARL100S
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole.
To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.
Riveter only without any rivets supplied
PTDARRRL100Learn MoreWeller S8 Bent Tips (2) for SI75 0054003399
Weller spare 9.5 mm bent tips to suit SI75.
Supplied in a pack of 2.
PTDWELS8Learn MoreWeller S3 Straight Tips (3) for SI15 0054003499
Weller spare 3.5 mm straight tips to suit SI15 Iron.
Supplied in a pack of 3.
PTDWELS3Learn MoreWeller S31 Solder Tip 0054321099
Weller long life soldering tip 0.4 mm to suit Weller WHS40 and WHS40LT soldering irons.
PTDWELS31Learn MoreWeller 8100UD Expert Soldering Gun 100W 240V 0050107299
The Weller 8100UD Expert Soldering Gun is an all-purpose gun that tackles cutting, sealing, and soldering with instant heat, through interchangeable tips operated by fingertip trigger control from this instant heat gun that is ready to solder in 6 seconds.
It has a high-efficiency tip of pre-tinned pure copper and a built-in spotlight which illuminates work.
Input Power: 100W.
Max. Temperature: 300C.
Iron Tip: T0054000299, 7135 Soldering Tip for 8100/9200.
PTDWEL8100UDLearn MoreWeller STT-1 Micro Point Tips (Pack of 3) for 2012 Iron 0054329599
Weller Micro Point Tips are made from nickel plated copper and will fit the Weller 2012 Soldering Iron, part of the mini-range.
Tip Size: 0.25mm. 11/64in.
Card of 3.
PTDWELSTT1Learn MoreWeller 7135 Card of 2 Solder Tips for 8100/D 0054000299
Pair of copper soldering tip, suitable for 8100/9200 soldering instant heat guns.
Card of 2.
PTDWEL7135Learn MoreWeller S7 Bent Tip (1) for SI100/120 0054311099
Weller spare bent tip to suit Weller SI100 and SI120 soldering irons.
PTDWELS7Learn MoreWeller PGR1 Gas Refill for Pyropen T0051616099
Weller PGR1 Gas Refill for Pyropen is a butane gas refill recommended for use with all Weller cordless soldering irons.
PTDWELPGR1Learn MoreWeller CT2E8 Spare Tip 7mm for W201 425C T005420899N
Weller straight chisel tip to fit W201 iron.
Temperature Rating: 425C.
PTDWELCT2E8Learn MoreWeller KH6 Bench Holder for SI15/25/40w 0051500699
Weller bench holder features a cast iron base with spring, holder and sponge.
PTDWELKH6Learn MoreWeller WHS40 Temperature Controlled Solder Iron T0056806399N
The Weller 18V WHS40 Temperature Controlled Solder Iron has a temperature range of 200 - 450C and eliminates the risk of heat spikes commonly associated with stations without temperature control. Equipped with an 18V low voltage iron with an ergonomic handle, allowing the user to comfortably get closer to the job at hand.
Input Power: 40W
Tip: T0054321199, S32 Solid Longlife Tip 2mm, SI15/SPI16.
PTDWELWHS40Learn MoreWeller W201D Temperature Controlled Iron 200W 0056105399
Weller W201D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity.
The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips.
The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C.
Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip.
PTDWELW201DLearn MoreWeller MT103 Nickel Plated Straight Tips(3) SP40 0054313699
Weller tips are solid copper, nickel plated and tinned, is a replacement tip for SP40 and SP40D Iron.
PTDWELMT103Learn MoreWeller MT1 Nickel Plated Cone Shaped Tip for SP23 0054313299
Nickel plated cone-shaped tip for use with the Weller SP23 and SP23D soldering irons.
Type: Cone-shaped tip.
Tip width: 3.0mm.
PTDWELMT1Learn MoreRiveting & Soldering
VAT Number: 100 5143 84