Araldite & Epoxy Adhesives

Gorilla Glue 5 Min 2-Part Epoxy Syringe has an impact-tough formula and uses hybrid technology to improve overall adhesion, strength, and flexibility. It fills voids and bonds uneven and vertical surfaces and has a 5-Minute set time, allowing time for repositioning.

The epoxy withstands moderate exposure to water and will not break down from exposure to common solvents. It has a Low VOC and is non-toxic once cured, safe for everyday handling.

Size: 25ml.

PTDGRGGES25

Everbuild STICK2 Rapid Epoxy is an industrial strength, 2-part clear adhesive which sets hard in just 4 minutes. Will bond metals, crockery, glass, wood, concrete, rubber, fabrics, crystal, jewellery and various hard plastics. Once cured may be drilled, sanded or painted. For industry and home.

STICK2 Rapid Epoxy Syringe Adhesive

PTDEVBS2RAPIDES

Everbuild STICK2 Rapid Epoxy is an industrial strength, 2-part clear adhesive which sets hard in just 4 minutes. Will bond metals, crockery, glass, wood, concrete, rubber, fabrics, crystal, jewellery and various hard plastics. Once cured may be drilled, sanded or painted. For industry and home.

STICK2 Rapid Epoxy, Tubes

PTDEVBS2RAPIDET

Evo-Stik Epoxy Rapid provides a strong bond in seconds. It takes about 5 to 7 minutes to set at room temperature and will attain full strength after approximately 24 hours. Once set, it can be sanded. Please ensure you wear a dust mask when doing so.

Ideal for use on ceramics, wood, chipboard, glass, metal and most hard plastics.

PTDGRPEVO808522

Everbuild STICK2 Rapid Epoxy is an industrial strength, 2-part clear adhesive which sets hard in just 4 minutes. Will bond metals, crockery, glass, wood, concrete, rubber, fabrics, crystal, jewellery and various hard plastics. Once cured may be drilled, sanded or painted. For industry and home.

PTDGRPEVBS2RAPIDET

The Evo-Stik Epoxy Control is an extra strong, long-lasting bonding agent that can be repositioned up to 2 hours after the initial application. It takes about 16 hours to completely set, depending on the ambient conditions.

Ideal for large areas and assembling a number of components on metal, wood, masonry, ceramics, glass and most hard plastics.

PTDGRPEVO808518

A steel reinforced metal epoxy putty, suitable for use with metals and most other types of materials. It sets hard in 10 minutes and can be used underwater. It can be drilled, tapped, filed, machined, sanded and painted once it is dry.

PTDEVOCRHFM

Unibond Repair Express Power Putty makes 1,000s of DIY and repair tasks easier - simply cut, knead and apply! Use Repair Express Power Putty to fill, stick, seal or rebuild permanently in minutes - no need for gloves.
Super strong Power Putty can be used on wood, metal, ceramics, concrete, brick, plaster and most plastics.

Ideal for use when:

FIXING - bathroom and kitchen furniture such as towel rails, soap dishes.
REPAIRING - broken furniture, hinges, broken ceramics, masonry, household items, e.g. garden pots.
SECURING - hooks, bolts, screws and nails.
SEALING - leaks in pipes and radiators (repair when dry).
FILLING - holes and chips in wood and masonry.

It is strong (up to 50Kg/cm2), can be used to fill gaps, is waterproof and heat and cold resistant between -30 C and 150 C. It cures white and can be painted, sanded or stained when set. Suitable for indoor and outdoor use. Resists common solvents and oil.

Size: 6 x 5g

PTDUNI2002387

Sylglas Plumber Fix is purpose designed as a permanent leak sealant for piping and tanks and can be used on most materials EXCEPT soft plastic materials.

Ideal for sealing weeping, sweating and burst metal pipes, radiators, tanks and cylinders.

Plumber Fix is a 2-part epoxy (with resin and hardener of differing colours so that when kneaded together, complete mixing is easily observed) that hardens to form a strong, waterproof, self-adhesive seal.

PTDSYLPFLFS

The Araldite Crystal Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Perfect for jobs which require invisible joins or high transparency.

Craft and hobby enthusiasts will appreciate the clear finish and Araldite Crystal is idea for use on many decorative or repair products including glass, jewellery, ceramics, china and porcelain as well as more mundane materials such as metal, wood, leather, fabrics and rubber.

Not suitable for use on items that will contact food or drink.

Araldite Crystal is water resistant, can be painted or sanded and will give you an initial setting time of 5 minutes with full, permanent bond strength achieved in 3 hours.
A 2-component epoxy adhesive with fast setting. Dries crystal clear. Parts repositionable for 5 minutes. Oil, chemical and impact resistant. High temperature resistance (-30C to 80C).

PTDARA400008

The Araldite Repair Epoxy Bar is a hard, long-lasting, solvent-free multipurpose repair putty that is waterproof and can be drilled, filled, painted or sanded. Ideal for bonding or sealing, it will cope with uneven surfaces and is highly recommended for wet applications on metal pipes, tanks and gutters.

It will even hold a repair where you are re-joining parts with stripped threads. Araldite Repair putty is a real ally for the serious DIY enthusiast and repairman! If you do need a smooth surface finish this can be simply achieved using a damp cloth before hardening.

Simply activate Araldite Repair putty by kneading it like dough, and it is recommended that you wear gloves. Bonds to most materials. Recommended for metal pipes, tanks, radiators, tools and equipment, guttering and stripped threads. Sets in wet conditions. Water, oil, chemical and impact resistant. High-temperature resistance (-40C to 120C).

PTDARA400015

Araldite Steel Epoxy is a strong, long-lasting solvent-free adhesive which is water-resistant and can be painted or sanded. Perfect for jobs on metal like plumbing, car bodywork, gates and windows.

With an environmentally sound product formulation it is recommended for use on most types of metal including steel, galvanised steel, cast-iron, copper and brass and it will set quickly in around 5 minutes achieving full strength in just 4 hours.

2-component epoxy with fast setting, handling time of 1 hour. Will not rust. Metallic grey colour. Fills gaps for uneven breaks. Parts repositionable for 4 minutes, with permanent full bond strength in 4 hours. High temperature resistance (-30C to 100C). Oil, chemical and impact resistant.

PTDARA400010

The Araldite Fusion Epoxy is a strong, long-lasting, solvent-free adhesive that gives the bonding power of a 2-part adhesive without mixing. Supplied in a syringe and offers express setting in just 90 seconds.

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). 2-component epoxy with a very fast setting.

Sets clear. Can be painted and sanded. Water, oil, chemical and impact resistant. High-temperature resistance (-30C to 65C).

Araldite Fusion Epoxy has all the bonding power of Araldites famous two-part epoxies delivered in a single shot by this clever syringe.

Size: 3g.

PTDARA400013

The Araldite Standard Epoxy Syringe is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs that require adjustment thanks to a long working time.

It has a long working time with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics.

It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results.

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). The 2-component epoxy with long working time. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High-temperature resistance (-30C to 80C). Withstands rough handling.

PTDARA400003

The Araldite Rapid 24ml syringe is a strong, long-lasting solvent-free adhesive which gives both prompt positioning of parts, up to 4 minutes, with permanent full bond strength in 3 hours. It is water resistant and can be painted or sanded.

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon).

The 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30C to 80C). Oil, chemical and impact resistant.

PTDARA400007