Hardware & Fixings
- Denso Flashing Tape, Grey Range
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting.
Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters.
Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics.
Breaking strength: 4.5 N/mm.
Adhesion strength: 4.5 N/mm width.
Temperature range for application: 5C to 40C.
Temperature range for service: 80C (maximum short term).
PTDGRPDENFTG50MMLearn MoreEverbuild 101 Multi-Purpose Linseed Oil Putty Range
Everbuild 101 Multi-Purpose Linseed Oil Putty is a hand applied setting glazing compound for sealing glass into metal and wooden frames.
- Easier to apply than most competitive putties.
- Extended shelf life.
- For wood and metal frames.
- Added plasticiser improves adhesion and helps prevent cracking.
- Single glazing of pretreated wooden and metal rebates.
- Unsuitable for plastic frames, heat absorbing glass, double glazing or frames treated with decorative microporous stains.
- Always mix contents of pack thoroughly to blend in any surface oil.
- Do not overpaint until a surface skin has formed (minimum 7 days, maximum 30 days).
PTDGRPEVBMPPB05Learn MoreDenso Tape Range
Denso tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases.
Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion.
Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers.
Breaking strength: 200 N/50mm minimum.
Elongation at break: 10%.
Breakdown voltage: 16kV
Temperature range for application: -5C to 45C.
Temperature range for service: 55C maximum.
PTDGRPDENTAPE50MMLearn MoreEverbuild Powerful Grip Double Sided Tape Range
Mammoth Powerful Grip Tape is a polyester fabric reinforced double-sided tape with a powerful synthetic rubber/resin adhesive designed for bonding almost any material to themselves or each other. Powerfu lGrip tape has an extremely high bond strength, can be used indoor and outdoor and is totally weatherproof when applied.
- Will stick to ceramics, wood, glass, plastics, brickwork, PVC etc.
- Strong initial bond strength.
- Will stick to porous and non-porous surfaces.
PTDGRPEVB2PG25Learn MoreEverbuild 502 Weatherproof Wood Adhesive Range
The Everbuild 502 series All Purpose Weatherproof Wood Adhesive is a high quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength , impact resistant bond that is usually stronger than the wood itself.
Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use.
Conforms to international standard EN 204 (D3) and BS 14256 for creep resistance.
PTDGRPEVBWOODBO125Learn MoreEverbuild Black Jack 901 Bitumen Paint Range
Everbuild 901 Black Bitumen Paint is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack. It is fast drying and is ideal for use on most common building surfaces.
Provides an effective waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of materials including iron and steel, lead, zinc, aluminium, asbestos - cement, concrete, stone, wood, felt and brick and is mainly
-Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.
-As a protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces
DO NOT use in areas where subsequent solvent contact is likely.
DO NOT use for potable drinking water tanks.
PTDGRPEVB90101Learn MoreEverbuild 401 Brick & Patio Cleaner Range
Brick and Patio Cleaner is a fast acting acid based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, paving flags and earthenware.
PTDGRPEVBBC1LLearn MoreEverbuild STICK2 All-Purpose Contact Adhesive Range
STICK2 All-Purpose Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally* for bonding decorative laminates, all types of wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. All tins are fully printed. This product has excellent adhesion and will stick to most common surfaces.
*Excluding 5L size which is for internal use only
PTDGRPEVBCON125Learn MoreEverbuild Evercryl One Coat Range
Everbuild Evercryl is a resin based, fibre reinforced roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. Evercryl may also be applied in frosty conditions down to -5C. Evercryl One Coat is instantly waterproof when applied, so there is no fear of washoff. Emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. Evercryl One Coat is brush applied and dries to a smooth seamless flexible membrane which resists algae and fungal growth. Because of the high level of fibre reinforcement, Evercryl One Coat will bridge small cracks and requires only a one coat brush application to give instant and total water protection, even in areas subject to ponding. Evercryl One Coat requires no primer on sound non-porous surfaces.
- May be applied in damp and wet conditions.
- Formulated from lightfast acrylic polymers to withstand sunlight for longer periods than traditional bitumen coatings.
- Fibre reinforced to bridge small cracks.
- Primerless adhesion to most bituminous and non-porous surfaces.
AREAS FOR USE
- General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions - for use on concrete, fibre/cement, roofing felt mastic asphalt, existing bituminous roof coatings, rigid PVCu corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc.
- Waterproofing guttering (plastic and metal), downpipes, gully, flashings, upstands, vents and leadwork.
PTDGRPEVBEVC02GRLearn MoreEverbuild Stixall Easi Squeeze Tube Range
The Everbuild Stixall Extreme Power Easi Squeeze is a one part, chemically curing solvent-free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves
Incredible initial grab, non-slip and gap filling properties with a high bonding strength for interior and exterior use. It offers excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc
It can be applied to wet surfaces and is totally waterproof and weatherproof. It contains a powerful biocide that prevents mould growth. Stixall is permanently flexible with 20% movement accommodation and resistant to chemicals and petrol (10% dilute acids/alkalis, most solvents). It is also non-staining on sensitive materials such as marble and granite.
Resistant to temperature extremes of -40C to +150C.
PTDGRPEVBSTIXESQWHLearn MoreFaithfull Plastic Post Range
The Faithfull plastic posts can be used in conjunction with plastic chain and bases.
A simple, easy way of restricting or managing areas both inside and outside.
The posts have the following dimensions: Size: 860mm high by 40mm diameter.
Please note bases are sold separately.
PTDGRPFAICHPOSTRWLearn MoreEverbuild Jetcem Rapid Set Cement Range
Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes.
Rapid setting (30 minutes, depending on ambient temperature and conditions).
Easy mixing, just add water.
Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement)
Internal and external repairs to gaps and cracks and walls and floors.
Repairing flags, slabs, stones and bricks.
Patching steps and window sills.
Pointing brick and stone.
Jointing earthenware pipes and drains.
Repairs to ponds and pools.
Setting in W/Cs and sinks.
Leak sealing in concrete based surfaces.
Setting railings and posts.
PTDGRPEVBJETCEM2Learn MoreEverbuild Premix Sand & Cement Range
Everbuild Jetcem Premix Sand and Cement is a premixed sand/cement based product which is easy-to-use and sets in approximately 30 min. Ideal for rapid patching or when a fast repair job is needed. Sets in the cold and wet.
PTDGRPEVBJETX2Learn MoreAerosol Line Marking Spray Paint Range
Durable, semi-permanent marking paint which has been specially formulated for stencil, applicator or freehand marking. Suitable for use on playing fields, roads and car parks, warehouses and golf courses.
The acrylic based paint provides a hard-wearing coverage.
Pack: 750ml Aerosol.
PTDGRPAERLMPBLearn MoreHardware & Fixings
VAT Number: 100 5143 84