Cabinet Scrapers

The Faithfull No.80 cabinet scraper removes fine shavings from wood to give a very smooth finish.
Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes on large areas. Unlike an abrasive it does not produce dust which can clog the grain.

The 70mm wide, 1.8mm thick blade is held in a fine grey iron cast body with a machined base. The wing handles allow for comfortable use over long periods. The cut can be changed from coarse to fine by turning the thumbscrew which forces the blade to bend slightly and protrude through the scrapers base.

The blade can be easily resharpened with a sharpening stone and a burr turned with a burnishing tool.

Replacement blade code: FAISCRAPERRB

PTDFAISCRAPER80

A 3 piece Shaped Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood.

Comprises:-

1 Oblong Scraper
1 Curved Scraper
1 Goose Neck Scraper

PTDFOO242

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile.

Each scraper comes complete with a plastic edge protector.

Ideal for smoothing hardwoods, removing paint and varnish etc.

PTDGRPBAH474125080

A 3 piece rectangular Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood.

Comprises 1 of each:-

6 x 3 inch Scraper
5 x 2 1/2 inch Scraper
4 x 2 inch Scraper

PTDFOO241

The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.
Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.

The scraper can be easily resharpened with a file and a burr turned with a burnishing tool.

Made from C60 Spring Steel.

Size: 150mm x 60mm

PTDFAIWSCS150

The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.

These scrapers have good edge retention but are easily resharpened.

Available in the following sizes:
MAR2450: 5in Rectangle (flat) 125mm.
MAR2451: 6in Rectangle (flat) 150mm.

Type: 5in rectangle (flat) 125mm.

PTDMAR2450

The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.

These scrapers have good edge retention but are easily resharpened.

Available in the following sizes:
MAR2450: 5in Rectangle (flat) 125mm.
MAR2451: 6in Rectangle (flat) 150mm.

Type. 6in rectangle. (Flat) 150mm.

PTDMAR2451

The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish.

These scrapers have good edge retention but are easily resharpened.

Available in the following sizes:
MAR2450: 5in Rectangle (flat) 125mm.
MAR2451: 6in Rectangle (flat) 150mm.

PTDGRPMAR2450

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile.

Each scraper comes complete with a plastic edge protector.

Ideal for smoothing hardwoods, removing paint and varnish etc.

Gauge: 0.6 mm /23g.

PTDBAH474125060

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile.

Each scraper comes complete with a plastic edge protector.

Ideal for smoothing hardwoods, removing paint and varnish etc.

Gauge: 0.8 mm /21g.

PTDBAH474125080

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile.

Each scraper comes complete with a plastic edge protector.

Ideal for smoothing hardwoods, removing paint and varnish etc.

Gauge. 0.6 mm /23g.

PTDBAH474150060

Made from high-quality Swedish chrome nickel steel, cold rolled, hardened and tempered, with specially ground cutting edges and a flat profile.

Each scraper comes complete with a plastic edge protector.

Ideal for smoothing hardwoods, removing paint and varnish etc.

Gauge: 0.8 mm /21g.

PTDBAH474150080

Bahco Paint scraper developed according to the scientific ERGO process. Designed to be stored in holster, used for all kinds of small precision jobs.

Two-component handle for better grip and comfort. Thin front handle with thumb grip. Front designed to fit profile blades 625 round, drop and pear shape, which can be turned 360 to find different radii or sharp points.

Supplied with triangular 25mm blade and holster.

PTDBAH625

Drop shape blade to fit the 625 scraper. Made from cemented carbide.

PTDBAH625DROP

Pear shaped blade to fit the 625 Bahco scraper.
Made from cemented carbide.

PTDBAH625PEAR