Spirit Levels

The Stabila 81S Torpedo Level has a strong cast aluminium T-profile making it easy to hold. The particularly slender trapezoidal bevelled shape makes it suitable for working in cramped spaces. The die-cast frame has 1 milled measuring face and protecting noses to prevent damage to milled face. Additional magnets mounted in the milled measuring surface hold this level securely on scaffolding or beams.

2 Vials: 1 plumb & 1 horizontal.
Accuracy: Normal Position: 0.029=0.5mm/m.
Accuracy: Overhead Position: 0.043=0.75mm/m.

Type 81SREM has rare earth magnets (five times stronger).

This Stabila 81S-10ML Magnetic Torpedo Level is supplied loose.

PTDSTB81S10ML

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more. The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft.

Acoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours.

As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and rubberised handholes for easier handling.

Measuring accuracy of electronic module at 0 and 90 0.05 at 1 and 89 0.2

Measuring accuracy of spirit level: in normal position: 0.029 = 0.5mm/m, and in upside down position 0.029 = 0.5mm/m.

Protection Class: IP65.

Stabila 196-2 Electronic Spirit Level.

Length: 800mm (32 in).

PTDSTB1962E80

Stabila 96-2-K 3 Vial Double Vertical Plumb Masons Level. Superior quality masons level with plastic shield to protect the level against hits with a trowel.

The second vertical vial is positioned closer to the centre of the level for better readability in lower positions.

Easy-to-clean due to chamfered edges and new vial plastic parts.

Extra-strong profile with ribs and reinforced upper and lower side for daily use on the construction site.

High-precision vials are firmly moulded in place to ensure complete accuracy.

Other features include: Removable end caps for difficult-to-reach corners and anti-slip stoppers for convenient marking of walls.

Length: 800mm (32 in).

PTDSTB962K80

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more. The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft.

Acoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours.

As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and rubberised handholes for easier handling.

Measuring accuracy of electronic module at 0 and 90 0.05 at 1 and 89 0.2

Measuring accuracy of spirit level: in normal position: 0.029 = 0.5mm/m, and in upside down position 0.029 = 0.5mm/m.

Protection Class: IP65.

Stabila 196-2 Electronic Spirit Level.

Length: 1220mm (48 in).

PTDSTB1962E120

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more. The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft.

Acoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours.

As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and rubberised handholes for easier handling.

Measuring accuracy of electronic module at 0 and 90 0.05 at 1 and 89 0.2

Measuring accuracy of spirit level: in normal position: 0.029 = 0.5mm/m, and in upside down position 0.029 = 0.5mm/m.

Protection Class: IP65.

Stabila 196-2 Electronic Spirit Level.

Length: 600mm (24 in).

PTDSTB1962E60

Easy to handle, lightweight, shock resistant level with top read vial for easy readability.
Will not dent like aluminium levels.
Ideal for use on finished surfaces (non-marking) measuring scale for multi tasks.
Made from high impact ABS plastic.

3 vials (0-90 - 45 )
Accurate to 2mm/m.

Length 450mm (18 in)

PTDSTA142475

Easy to handle, lightweight, shock resistant level with top read vial for easy readability.
Will not dent like aluminium levels.
Ideal for use on finished surfaces (non-marking) measuring scale for multi tasks.
Made from high impact ABS plastic.

3 vials (0-90 - 45 )
Accurate to 2mm/m.

Length 600mm (24 in)

PTDSTA142476

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-40 Level 3 Vial.

Length: 400mm (16in).

PTDSTB96240

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-60 Level 3 Vial.

Length: 600mm (24in).

PTDSTB96260

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-100 Level 3 Vial.

Length: 1000mm (39in).

PTDSTB962100

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-120 Level 3 Vial.

Length: 122cm (48in).

PTDSTB962120

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-180 Level 3 Vial.

Length: 1830mm (72in).

PTDSTB962180

Stabila 96-2 Extra strong double plumb ribbed box section levels are made from an extra strong light metal rectangular profile with gripping ridges and removable end-caps made from two materials.

The removable end-caps are also equipped with well-proven patented anti-slip stops. Has 2 vertical vials, 1 horizontal vial, and 2 milled measuring surfaces on levels up to 120cm. Levels over 120cm do not have milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m. Overhead Measurement 0.043 = 0.75 mm/m.

Stabila 96-2-244 Level 3 Vial.

Length: 2440mm (96in).

PTDSTB962244

The Stabila 196-2 levels are made from extra strong, light metal. They have rectangular profile and an extra strong ribbed frame, with rubberised hand holds. Their removable end caps incorporate anti-slip wall pads, which allow the level to be held firmly against a wall with one hand without slipping.

Each level has 2 vertical vials and 1 horizontal vial. The levels have 2 milled measuring surfaces, except for the 180cm levels, which do not have any milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m, overhead measurement 0.029 = 0.5 mm/m.

Stabila 196-2-60 Level 3 Vial.

Length: 600mm (24in).

PTDSTB196260

The Stabila 196-2 levels are made from extra strong, light metal. They have rectangular profile and an extra strong ribbed frame, with rubberised hand holds. Their removable end caps incorporate anti-slip wall pads, which allow the level to be held firmly against a wall with one hand without slipping.

Each level has 2 vertical vials and 1 horizontal vial. The levels have 2 milled measuring surfaces, except for the 180cm levels, which do not have any milled surfaces.

Measurement Accuracy: in normal position 0.029 = 0.5 mm/m, overhead measurement 0.029 = 0.5 mm/m.

Stabila 196-2-100 Level 3 Vial.

Length: 1000mm (39in).

PTDSTB1962100