Multi-Sharp Tool Sharpeners

The Multi-Sharp ATT2001 Dual Purpose Sharpener will accurately sharpen HSS and masonry bits, (including 2 and 4 edged bits and SDS Plus Bits) and Brad centre point bits. The grinding jig accurately positions each type of bit over the wheels (aluminium oxide and silicon carbide), and grinds the correct tip and relief angles. Can be powered by any electric drill.

It also re-edges and re-sharpens scribers, bradawls, punches, cold chisels and TCT tile and laminate cutters. Fits any power drill.

Drill Bit Capacity: 3-13mm.

Long life, high quality Aluminium Oxide and Silicon Carbide wheels sharpen at least 150 HSS/Wood bits and 75 Masonry/SDS+ bits respectively (based on 6.5mm dia.). Grinding wheels are replaceable.

Also re-edges, resharpens small tools: scribers, bradawls, punches, cold chisels, TCT laminate/tile cutters.

PTDATT2001

The Multi-Sharp ATT3001 Wetstone Chisel & Plane Blade Sharpener has the following features:

*WATER-COOLED SHARPENING

Water-cooling is acknowledged by professionals to hone the finest edges. The Wetstone uses re-circulating water to eliminate over-heating of the blade edge and loss of steel temper blueing. Simply fill the built-in reservoir with water, turn on the power drill and a continuous film of water covers the face of the grinding wheel.

*WOOD CHISELS / PLANE BLADES

Wetstone sharpens even badly damaged chisels / plane blades quickly, because it uses the relatively high power / torque of an electric drill. The chisel clamp accurately holds the blade at the selected angle for a precision ground edge.

*Blade capacity: 10-60mm.

*Sharpening angles: 25,30,35,40 for primary and secondary bevels, plus firmer, bevel-edge and rebate chisels.

*The traditional leather strop removes any burr, for a razor sharp edge.

*SMALL TOOLS

The Tool Rest gives a firm base for re-pointing and re-edging a whole range of small tools including: cold chisels, bradawls, screwdrivers, centre-punches, scribers, wood carving / turning tools, gouges etc. Marked angles on the rest indicates the tip angle.

*Power source : any electric drill.

PTDATT3001

The Multi-Sharp ATT2003 Silicon Carbide replacement grinding wheel fits the ATT 2001 Multi-Sharp Drill Bit Sharpener.

PTDATT2003

The Multi-Sharp ATT2002 Aluminium Oxide replacement wheel fits the ATT2001 Multi-Sharp Sharpener.

PTDATT2002

The ATT3002 Multi-Sharp Replacement grinding wheel fits the 3001 Wetstone Water Cooled Chisel/Plane Sharpener.

PTDATT3002

The Multi-Sharp ATT3500 Diamond Tool Sharpener is highly versatile, suitable for many aplications around the home, garden, for DIY and sports. It has 3 sharpening surfaces (flat, grooved and half-round), coated in high quality diamond particles, which provide excellent durability. Suitable for sharpening multi-tool blades, pen/utility knives; carbide tile cutters, pointed tools, secateurs/loppers.

The diamond surfaces sharpen the hardest materials, including carbide, ceramic and stainless steel. The sharpening surfaces retain their flatness and are extremely long-lasting. The anodised aluminium case protects the diamond rod when not in use. The rod is lockable at any length.

The Multi-Sharp Diamond Tool Sharpener has been recommended BEST BUY by WHICH ?

PTDATT3500