Pipe & Drain Test Equipment

The Monument MON1445 1445F spare hose for connecting testing equipment comes in the following:

Length: 1 metre (3/8 inch).

PTDMON1445

Monument air testing U-gauge kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4 in) water gauge pressure on any size of drain or pipe.

Kit contains: U-Gauge, hand bellows pump, 1/2 in and 1 in BSP nipple caps, tee piece, 3 x 600mm lengths of rubber hose.

The kit is housed in a display box with full instructions.

PTDMON174

Monument Schrader Valve Pump for airbag stoppers and flexible plugs with Schrader valves.

PTDMON1308

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings.

These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.

The Monument MON1377 1377W Drain Testing Plug comes with the following specifications:
Size: 75mm (3 inch).
Capable of sealing against pressures of up to 2.24 bar / 33 psi.

PTDMON1377

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings.

These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.

Monument 1378Z Drain Testing Plug.

Size: 100 mm (4 in).
Capable of sealing against pressures of up to 1.97 bar / 29 psi.

PTDMON1378

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings.

These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.

Monument 1379 Testing Plug.

Size: 150mm (6 in).
Capable of sealing against pressures of up to 1.62 bar / 24 psi.

PTDMON1379

Monument Pipe Dry Testing Kit is ideal for dry testing pipework during and after installation. The 1512 has a easy to read triple scale bar in psi and kPa scales and is suitable for water, air, gas and petroleum oil pipes up to 4 bar, and for testing combi systems.

Can be left on test, while flooring is laid to reveal any nail damage also test hot and cold supplies separately to ensure pipes are not crossed. The Monument 1512 is fitted with a Schrader Valve and 15 mm push fit fitting for quick and easy assembly and has a rubber boot for added protection.

PTDMON1512

The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. This plug is fitted with peripheral ribs that will give a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure.

For use with Monument drain testing equipment. Inflate with MON1308 pump.

Size: a 100mm (4 in).

Maximum inflation pressure 0.59 bar / 8.5 psi.

PTDMON1290

Monument Tee Piece for U Gauge connects three pieces of rubber hose together for convenient connection to U Gauge, bellows and nipple cap.

PTDMON183

The Monument MON180 180S nipple cap for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge.

Size: 1/2 inch BSP.

PTDMON180

This Ridgid manual pressure test pump is ideal for leaks in installations which are required to be leak proof. Especially for use in heating, compressed air, refrigeration systems, oil installations, sprinkler systems and other small bore pipe installations. Automatic pressure holding valves enable the system to be easily pressurised. Very low effort required to operate.

Maximum pressure: 725 psi.
Container capacity: 13.5 litres (water, oil or ethylene glycol).
Volume/stroke: 38cm.

PTDRID50072

This Monument set of 6 Test Plugs contains the following small bore test plugs:
2 x 1370B 15mm Test Plug.
2 x 1371E 22mm Test Plug.
2 x 1372H 28mm Test Plug.

Used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. Cannot be used for air testing purposes by themselves.

PTDMON1369

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings.

These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.

Diameter range: 48-62mm.
Maximum allowable back pressure: 37psi (2.50bar).
1/2 in BSP outlet.

PTDMON1376

Monument Drain Testing Plugs are durable, quality flexible drain plug for the plugging of drains and pipes. This plug is easy to use and are available in 3 and 4-inch versions. Fitted with removable top caps and rubber rings.

These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal.

Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself.

Diameter range: 37-45mm.
Maximum allowable back pressure: 60psi (4bar).

PTDMON1374

The Monument Air Bag is a durable, quality, flexible drain plug for plugging drains and pipes. This plug is fitted with peripheral ribs that will give a better seal and grip on the tube or pipe being repaired or replaced. It has a long feed hose that is fitted with a Schrader valve to quickly release the pressure.

For use with Monument drain testing equipment. Inflate with MON1308 pump.

Suitable for blocking off drain pipes with a diameter range of 142-200mm.
Size: 150mm.
Maximum inflation pressure: 7.5psi (0.52bar).

PTDMON1291