Insulated Slip Joint Pliers
- Faithfull VDE Water Pump Pliers 250mm VDE01009
These Faithfull VDE Water Pump Pliers are manufactured from chrome vanadium steel and undergo stringent high voltage tests in accordance to EN 60900:2012 and can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC.
These adjustable pliers are designed for gripping pipes, nuts and bolts. The sliding pivot allows a wide range of jaw opening adjustments.
Length: 250mm (10in).
Jaw opening up to 60mm.
PTDFAIPLVDEWP10Learn MoreStanley FatMax Maxsteel Waterpump Pliers VDE 255mm 0-84-294
The Stanley FatMax VDE Maxsteel Waterpump Pliers are made from a heat treated, high chrome steel forging for long life and with hand ground induction hardened blades. DIN /ASO/ANSI compliant. For gripping a variety of electrical fittings or assembly components. Approved for working around live circuits that do not exceed 1,000 volts.
Compliant to EN60900, IEC/CE1900/VDE0680.
PTDSTA084294Learn MoreKnipex VDE Cobra Water Pump Pliers 250mm 87 26 250 SB
The Knipex 87 26 Series VDE Cobra Water Pump Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. They are adjusted by shifting one jaw directly on to the workpiece and can then be opened at the touch of a button off the workpiece. They have a fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width.
The slim size head and joint area allows for good access to the workpiece and they are self-locking on pipes and nuts: no slipping on the workpiece and low hand force required. The gripping surfaces have special hardened teeth, teeth hardness approx. 61 HRC which makes for low wear and stable gripping. The box-joint design gives high stability because of double guide and the guard prevents operators fingers being pinched.
Capacity: Pipe: 50mm, Nut: 46mm
PTDKPX8726250Learn MoreKnipex VDE Alligator Water Pump Pliers 250mm 88 06 250 SB
These Knipex 88 06 Series Alligator VDE Water Pump Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. With a box-joint design for high stability.
Made from chrome vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. These pliers offer good access to the workpiece due to slim size of head and joint area.
Capacity: Pipe: 50mm, Nut: 46mm
Length: 250mm (10in)
PTDKPX8806250Learn MoreITL Insulated Insulated Waterpump Pliers UKC-00141
The Insulated Waterpump Pliers with a groove joint and handles made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working.
In addition, this tool meets the requirements of Category C, which requires it to perform at extreme temperatures of -40C to +70C, making it unique in this category.
These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.
PTDITL00141Learn MoreKnipex VDE Pliers Wrench 250mm 86 06 250 SB
The Knipex 86 06 Series Pliers Wrench is fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Combines a set of pliers and a wrench into a single tool. Also excellent for gripping, holding, pressing and bending workpieces. Lever transmission is greater than 10:1, for a strong gripping power.
Made from forged, vanadium electric steel, multi stage oil-hardened with a chrome plated finish. Zero backlash jaw pressure prevents damage to edges of sensitive and soft nuts (Cu). With a scale for presetting the opening width apart from the workpiece. Parallel jaws provide more grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. No unintentional shift of the gripping jaws and no slipping of the joint.
PTDKPX8606250Learn MoreMilwaukee VDE Water Pump Pliers 240mm 4932464574
The Milwaukee Hand Tools VDE Water Pump Pliers are made of forged chrome vanadium steel with a grey titanium surface finish that is non-reflective and provides maximum corrosion resistance. The jaws are additionally induction hardened with self-locking serration for best grip.
It has a curved box joint with wide guide surfaces to withstand highest torque pressures. Curved box joint provides for larger gripping capacity, 40% above ISO standard. The joint is smooth and precise for maximum power transmission with optimum leverage for easy and effortless work.
Fitted with an ergonomic 3-component handle with soft grip for comfortable handling. Finger trap protection for safe work, prevents injuries caused by squeezing. It also features a lanyard hole.
VDE (DIN EN/IEC 60900) certified: tested up to 10,000V and guaranteed to 1,000V. Tested against cold to -40C.
Pipe Capacity: 50mm
Total Length: 240mm
PTDMHT932464574Learn MoreBahco VDE Quick-Adjust Water Pump Pliers 250mm - 44mm Capacity 7224S
The Bahco 7224S VDE Quick-Adjust Water Pump Pliers are fitted with 2-component VDE handles for maximum grip comfort. Suitable for work on live equipment, up to 1,000V.
Made from high-performance, alloy steel with a phosphate finish, anti-corrosion treated. The narrow head provides great accessibility in confined spaces. With hardened teeth (60 HRC to 62 HRC) and a self-adjusting patented lateral lever; flat and round grip shape with auto-tightening device. Up to 35% bigger mouth opening compared to market standard.
Conform to ISO 8976 and IEC 60900 standards.
Overall Length: 250mm
PTDBAH7224SLearn MoreInsulated Slip Joint Pliers
VAT Number: 100 5143 84