Insulated Pliers

These Faithfull VDE Pliers are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to EN 60900:2012. All Faithfull VDE rated tools can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC.

These long nose pliers are a combination plier with long half-round section jaws and serrated gripping surfaces. They are ideal for accessing deeply recessed wires and components.

PTDGRPFAIPLVDELN6

These Faithfull VDE Pliers are manufactured from chrome vanadium steel and undergoing stringent high voltage tests in accordance to EN 60900:2012. All Faithfull VDE rated tools can safely be used when working on live electrical wires at voltages of up to 1,000 volts AC. These combination pliers are designed for both gripping and cutting applications and have induction hardened cutting edges for cutting medium-hard wire.

Cutting Capacity: 2.0mm.

PTDGRPFAIPLVDEC7

The ITL Insulated Combination Pliers with side cutter and injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category C, which requires it to perform at extreme temperatures of -40C to +70C, making it unique in this category.

These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.

PTDGRPITL00011

The ITL Insulated Snipe Nose Pliers with side cutter and injection, moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category C, which requires it to perform at extreme temperatures of -40C to +70C, making it unique in this category.

These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.

PTDGRPITL00051

The Knipex 02 06 Series High Leverage Combination Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. They require 35% less effort than with conventional combination pliers. Easier cutting, powerful gripping, bending and pulling due to optimised leverage.

Made from high-grade special tool steel, forged, multi stage oil-hardened. Chrome plated finish. Long cutting edges for thicker cables and gripping zones for flat and round material, suitable for versatile use. With cutting edges (hardness approx. 63 HRC) for soft and hard wire and piano wire.

Specification

Cutting Capacity:
02 06 180: Piano 2mm, Hard 2.5mm, Multi-Strand 11.5mm
02 06 200: Piano 2.2mm, Hard 2.8mm, Multi-Strand 13.0mm
02 06 225: Piano 2.5mm, Hard 3.0mm, Multi-Strand 14.0mm

PTDGRPKPX0206200

The Knipex 03 06 Series Traditional Combination Pliers with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. Chrome plated finish. The jaws have longer cutting edges for thicker cables and gripping zones for flat and round materials.

PTDGRPKPX0306160

These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers.

With 6 functions:

-Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material.

-Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes.

-Stripping holes for conductors of 0.75 - 1.5mm and 2.5mm

-Crimp die for wire-end ferrules 0.5 - 2.5mm

-Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm / dia. 15mm

-Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected

PTDGRPKPX1386200

The Knipex 70 06 Series Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With a narrow head style for use in confined areas. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. High-quality material and precise workmanship for long service life.

Precision cutting edges for soft and hard wire. The cutting edges additionally induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. The indispensable diagonal cutter for all-round use.

PTDGRPKPX7006160

The Knipex 74 06 Series High Leverage Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With an integrated forged axle for cutting all types of wire including piano wire.

Made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. Precision cutting edges additionally induction-hardened, approx. 64 HRC. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio.

PTDGRPKPX7406160

The Knipex 95 Series Cable Shears are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. For cutting copper and aluminium cables without crushing or deforming as well as multiple stranded cables. Not suitable for steel wire and hard drawn copper conductors.

Made from high-grade special tool steel, forged, oil-hardened. Chrome plated finish. Precision ground, hardened blades for easy cutting, one-hand operation. The handles are fited with guards that prevents operators fingers being pinched. It also features an adjustable bolted joint, self-retaining screw.

PTDGRPKPX9516165

Bahco Insulated side cutting pliers have progressive edges, the cutting radius progresses along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip.

Has a screw joint that provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity.

Have a black, anti-corrosion treated finish made from high performance alloy steel, and have plastic injected handles. Induction hardened cutting edges, and round shaped jaws give improved accessibility in confined spaces.

Conform to ISO 5749, and IEC 60900 standards.

PTDGRPBAH2101S140

Manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are resistant to temperatures from -20 to +70 C making them ideal for use in demanding or hostile environments.

Type: Combination Plier

PTDGRPSTA084000

Manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are resistant to temperatures from -20 to +70 C making them ideal for use in demanding or hostile environments.

Type: H.D. Diagonal Cutting Plier

PTDGRPSTA084003

FatMax VDE Long Nose Pliers manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are made from a heat treated, high chrome steel forging for long life and have hand ground, induction hardened blades. DIN/ASO/ANSI compliant. Ideal for maximising grip and manoeuvring of small objects in confined spaces.

PTDGRPSTA084006

IRWIN Vise-Grip VDE pliers are manufactured from chrome nickel steel for improved durability on the gripping and cutting face. Featuring moulded, pull-resistant one-component handles for added comfort and less hand fatigue.

TUV/GS/VDE Approved.

PTDGRPVIS10505865