End Cutting Pliers & Carpenters Pincers

FatMax End Cutting Pliers with bi-material handles and heat treated chrome steel forging. Has an interlocking joint assembly and high frequency heat treated cutting edges. Ideal for very close cropping of wire to the surface of the workpiece.

PTDSTA089875

Stanley Traditional pattern Carpenters Pincers forged from high grade carbon steel with precision ground jaws and cutting edges. Machined face and side for an attractive appearance and reduced marking of workpiece. Flat handles for improved comfort in use.

Conform to ISO 9243 and DIN 5241 standards.

Size: 250mm (10 in)

PTDSTA284185

End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.

PTDGRPBAH527160

The compound lever design of the end cutting nipper gives excellent cutting performance with low handle load.

This is ideal for the reactive cutting operations encountered in the spring, and bedding production.

Length: 150mm (6in).

PTDMAU3010150

The IRWIN Vise-Grip End Cable Cutter featuring induction hardened cutting face. The end cable cutters are made from chromium nickel steel that allows for improved durability on the gripping and cutting face.

The pliers also feature machined jaws for maximum gripping strength and moulded ProTouch handles for added comfort and less hand fatigue. Cuts up to 2.0mm diameter cables.

Length: 200m (8in).

PTDVIS10505517

The Knipex 68 01 range end cutting pliers are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications and come in 180mm, 200mm and 280mm versions.

The 68 01 series cutting pliers offer a long service life making these the most widely purchased end cutting pliers.

With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.

The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.

PTDGRPKPX6801180

The Irwin Vise-Grip Nail Puller has machined jaws for maximum gripping strength and moulded ProTouch grips for added comfort and less fatigue. It is TUV/GS certified for optimal safety and user confidence.

Length: 200mm (8in).

PTDIRW10508157

The Knipex 51 01 210 Hammerhead Style Carpenters Pincers are a heavy-duty nail puller with striking face for driving in nails. These Nail puller are manufactured from special tool steel, are oil hardened and tempered for added strength and durability, with polished head and PVC plastic coated handles for added grip and comfort.

Length. 210mm (8 1/4 in).

PTDKPX5101210

The Knipex 68 01 range end cutting pliers are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications and come in 180mm, 200mm and 280mm versions.

The 68 01 series cutting pliers offer a long service life making these the most widely purchased end cutting pliers.

With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.

The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.

Length: 180mm (7in).

68 01 180: Hard: 2.5mm, Medium: 3.2mm, Soft: 4.0mm.

PTDKPX6801180

The Knipex 68 01 range end cutting pliers are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications and come in 180mm, 200mm and 280mm versions.

The 68 01 series cutting pliers offer a long service life making these the most widely purchased end cutting pliers.

With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.

The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.

Length: 200mm (8in).

68 01 200: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm.

PTDKPX6801200

The Knipex 68 01 range end cutting pliers are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications and come in 180mm, 200mm and 280mm versions.

The 68 01 series cutting pliers offer a long service life making these the most widely purchased end cutting pliers.

With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.

The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.

Loose (no packaging).

Length: 200mm (8in).

68 01 200: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm.

PTDKPX6801200L

The Knipex 68 01 range end cutting pliers are ideal for twisting and cutting wire in one operation. They are fast, reliable and economical and will make light work of the toughest of job applications and come in 180mm, 200mm and 280mm versions.

The 68 01 series cutting pliers offer a long service life making these the most widely purchased end cutting pliers.

With cutting edges hardened approximately 61 HRC, these pliers will help make light work on annealed tie wire used on reinforced rods or braided reinforced concrete mesh.

The Knipex 68 01 range of pliers are made from high-grade special tool steel, forged and then oil-hardened for reliability and durability. They have plastic moulded handles for added grip and user comfort.

Length: 280mm (11in).

Cutting capacity: Hard: 3.2mm, Medium: 4.0mm, Soft: 4.5mm.

PTDKPX6801280

End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.

Length: 160mm (6 1/4 in).
Cutting capacity:
2.0mm piano wire.

PTDBAH527160

End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.

Length: 200mm (8 in).
Cutting capacity:
2.5 mm piano wire.

PTDBAH527200

The Stanley FatMax End Cutting, Dual Pivot Pliers give 70% more cutting and gripping power than regular action pliers. They have bi-material handles and hardened steel jaws.

PTDSTA071851