25 items

Electronic Cutters

Electronic Cutters
View as Grid List

25 items

Set Ascending Direction Set Descending Direction
  1. Lindstrom Diagonal Cutting Micro Bevel Nipper 110mm 8140

    SKU: PTDLIN8140

    List Price:  

    £65.80

    Our Price:  

    £40.88

    Inc VAT:  

    £49.06

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Lindstrom Diagonal Cutting

    Size: 110mm.
    Type: Micro Bevel Nipper.

    PTDLIN8140

    Learn More
  2. Lindstrom Supreme Diagonal Cutting Micro Bevel Cut Tapered Head Nipper 109mm 7190

    SKU: PTDLIN7190

    List Price:  

    £77.88

    Our Price:  

    £48.39

    Inc VAT:  

    £58.07

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 109mm (4.29 in).
    Blade length (B): 9mm (0.35 in).
    Head width (C): 9mm (0.35 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 1.0mm (0.04 in).
    Cutting capacity: 0.2-1.25mm.

    Head type: Tapered
    Cutting edge: Micro-bevel.

    The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7190

    Learn More
  3. Lindstrom Diagonal Cutting Flush Cut Nipper 110mm 8141

    SKU: PTDLIN8141

    List Price:  

    £66.00

    Our Price:  

    £41.01

    Inc VAT:  

    £49.21

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 110mm (4.3/8 in)
    Blade length (B): 10mm (0.39 in).
    Head width (C): 10mm (0.39 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 0.8mm (0.03 in).
    Cutting Capacity: 0.1-1.25mm.

    Cutting edge: Flush Bevel.

    The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

    PTDLIN8141

    Learn More
  4. Lindstrom Diagonal Cutting Micro Bevel Cut Nipper 112.5mm 8150

    SKU: PTDLIN8150

    List Price:  

    £81.25

    Our Price:  

    £50.49

    Inc VAT:  

    £60.59

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 112mm (4.1/2in).
    Blade length (B): 12.5mm (0.5 in).
    Head width (C): 12.5mm (0.5 in).
    Head depth (D): 6.0mm (0.24 in).
    Tip width: (F): 1.2mm (0.05 in).
    Cutting capacity: 0.3-1.6mm.

    Cutting edge: Micro-bevel.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN8150

    Learn More
  5. Lindstrom Diagonal Cutting Micro Bevel Cut Nipper 125mm 8160

    SKU: PTDLIN8160

    List Price:  

    £78.05

    Our Price:  

    £48.50

    Inc VAT:  

    £58.20

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 125mm (5 in).
    Blade length (B): 16mm (0.63 in).
    Head width (C): 16mm (0.63 in).
    Head depth (D): 8mm (0.31 in).
    Tip width: (F): 1.6mm (0.06 in).
    Cutting capacity: 0.4-2.0mm.

    Cutting edge: Micro-bevel.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN8160

    Learn More
  6. Lindstrom Supreme Oblique Cutting Micro Bevel Cut Double Angled Head Nipper 108mm 7290

    SKU: PTDLIN7290

    List Price:  

    £84.34

    Our Price:  

    £52.41

    Inc VAT:  

    £62.89

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 108mm (4.25 in).
    Blade length (B): 8mm (0.31 in).
    Head width (C): 10.5mm (0.41 in).
    Head depth (G): 15mm (0.59 in).
    Cutting capacity: 0.35-1.25mm.

    Head type: Double angled.
    Cutting edge: Micro-bevel.

    Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7290

    Learn More
  7. Lindstrom Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108mm 7291

    SKU: PTDLIN7291

    List Price:  

    £93.71

    Our Price:  

    £58.22

    Inc VAT:  

    £69.86

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 108mm (4.25 in).
    Blade length (B): 8mm (0.31 in).
    Head width (C): 10.5mm (0.41 in).
    Head depth (G): 15mm (0.59 in).
    Cutting capacity: 0.35-1.25mm.

    Head type: Double angled.
    Cutting edge: Flush.

    Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access.

    The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

    PTDLIN7291

    Learn More
  8. Lindstrom Diagonal Cutting Ultra Flush Cut Nipper 110mm 8142

    SKU: PTDLIN8142

    List Price:  

    £73.62

    Our Price:  

    £45.75

    Inc VAT:  

    £54.90

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Length (A): 110 mm (4.3/8 in).
    Blade length (B): 10mm (0.39 in).
    Head width (C): 10mm (0.39 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 0.8mm (0.03 in).
    Cutting Capacity: 0.1-1.0mm.

    Cutting edge: Ultra flush.

    The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.

    PTDLIN8142

    Learn More
  9. Lindstrom Supreme Oblique Cutting Nippers Range

    SKU: PTDGRPLIN7290

    From:  

    £48.39

    Inc VAT:  

    £58.07

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    PTDGRPLIN7290

    Learn More
  10. Lindstrom Diagonal Cutting Nippers Range

    SKU: PTDGRPLIN8140

    From:  

    £40.88

    Inc VAT:  

    £49.06

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    PTDGRPLIN8140

    Learn More
  11. Knipex Precision Electronics Side Cutter ESD 125mm 79 42 125 Z ESD

    SKU: PTDKPX7942125ES

    List Price:  

    £97.72

    Our Price:  

    £48.21

    Inc VAT:  

    £57.85

    The Knipex Precision ESD Electronics Side Cutters are fitted with electrically discharging handles (dissipative). They provide an optimised flush cutting result in soft materials and are perfect for installations with tight tolerances and for precise configuration of wire ends. These pliers are 20% lighter than conventional electronics pliers and are fitted with ergonomically optimised multi-component handles.

    The extremely precise ground and sharp cutting edges are perfect for exact cutting on delicate electronic components and the cutting edges have been additionally induction hardened to approx. 64 HRC. Cutting blades are made of high-quality ball bearing steel with a polished finish and have been processed with the highest degree of care.

    They have a bolted joint that has carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Each opening movement is gentle and even without backlash, thanks to the smooth-running double spring. Each work step proceeds reliably and precisely. This makes work much easier for professionals.

    Specification

    Length: 125mm.
    Cutting Capacity: Soft Wire: 0.1-1.3mm.
    Weight: 58g.

    PTDKPX7942125ES

    Learn More
  12. Knipex Electronic Oblique End Cutting Nippers 120mm 64 32 120

    SKU: PTDKPX6432120

    List Price:  

    £75.06

    Our Price:  

    £37.04

    Inc VAT:  

    £44.45

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 120mm.
    End diagonal cutter with small bevel - 15 .

    PTDKPX6432120

    Learn More
  13. Knipex Electronic Diagonal End Cutting Nippers Short Head 115mm 64 42 115

    SKU: PTDKPX6442115

    List Price:  

    £73.64

    Our Price:  

    £36.34

    Inc VAT:  

    £43.61

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 115mm.
    End oblique cutter, short head with small bevel 27 .

    PTDKPX6442115

    Learn More
  14. Knipex Electronic Diagonal Cut Pliers Extra Slim PVC Grip 125mm 75 02 125 SB

    SKU: PTDKPX7502125

    List Price:  

    £64.90

    Our Price:  

    £32.03

    Inc VAT:  

    £38.44

    The Knipex 75 02 125 extra slim diagonal cutters are constructed from solid style forged top quality steel with precision non-slip tips for added strength and durability. With high quality material and precise workmanship for long service life. Clean cutting at cutting edge tips for hard or soft wire or thin copper wires. With narrow head style for use in confined areas.

    Like most of the Knipex range of pliers, all components have oil hardened edges and hardened electric steel forged to approximately 64 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have a hardened head and plastic PVC coated cushion grip handles for added durability and comfort.

    Length: 125mm.
    Cutting Capacity: Piano: 0.4mm, Hard: 0.6mm, Medium: 1.0mm, Soft: 0.2-1.3mm.

    PTDKPX7502125

    Learn More
  15. Knipex Electronic Diagonal Cut Pliers - Round Bevelled 115mm 77 12 115

    SKU: PTDKPX7712115

    List Price:  

    £72.40

    Our Price:  

    £35.72

    Inc VAT:  

    £42.86

    The Knipex 77 12 Electronic diagonal cutter are a top quality precision cutters for ultra fine cutting work in electronics and fine mechanics. Has around head, bevelled with wire clamp and round head, NON-bevelled. They have precision shaped tips which are ideal for cutting close sitting wire, soft wire up to 1.6mm to hard wire up to 0.5mm diameter.

    These Knipex electronic cutters are jointed with a stainless steel rivet for added strength and easy movement and have cutting edges additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth play-free joint with stainless steel rivet movement for minimum operator fatigue. The handles are coated with soft plastic for comfort and a return spring built into the handle.

    This model has a precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. These pliers are made from special tool steel which is oil hardened for added strength and durability. With polished heads.

    Length 115mm.
    Cutting Capacity: Hard: 0.6mm, Medium: 1.2mm, Soft: 0.2-1.6mm.

    PTDKPX7712115

    Learn More
No more product
Electronic Cutters
© 2020 Building Supplies Direct Online Ltd
VAT Number: 100 5143 84