39 items

Electronic Cutters & Nipper Pliers

Electronic Cutters & Nipper Pliers
View as Grid List

39 items

Set Ascending Direction Set Descending Direction
  1. Knipex Precision Electronics Diagonal Cutters 125mm 79 42 125 Z

    SKU: PTDKPX7942125

    List Price:  

    £94.14

    Our Price:  

    £46.45

    Inc VAT:  

    £55.74

    The Knipex Precision Electronics Diagonal Cutters have an optimised flush cutting result on soft materials and are perfect for installations with tight tolerances and for precise configuration of wire ends. These pliers are 20% lighter than conventional electronics pliers and are fitted with ergonomically optimised multi-component handles.

    The extremely precise ground and sharp cutting edges are perfect for exact cutting on delicate electronic components and the cutting edges have been additionally induction hardened, approx. 64 HRC. Cutting blades are made of high-quality ball bearing steel with a polished finish and have been processed with the highest degree of care.

    They have a bolted joint that has carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Each opening movement is gentle and even without backlash, thanks to the smooth-running double spring. Each work step proceeds reliably and precisely. This makes work much easier for professionals.

    Specification

    Length: 125mm.
    Cutting Capacity: Soft Wire: 0.1-1.3mm.
    Weight: 58g.

    PTDKPX7942125

    Learn More
  2. Knipex 78 61 140 Electronic Super Knips XL 140mm 78 61 140 SB

    SKU: PTDKPX7861140

    List Price:  

    £44.15

    Our Price:  

    £21.79

    Inc VAT:  

    £26.15

    Knipex Electronic Super Knips XL for ultra-fine cutting work, e.g. in electronics and fine mechanics and for cutting cable ties to length. With ground, very sharp cutting edges without bevel. Precision shaped tips cut wires resting on a board from 0.2mm.

    They have a shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. The joint features a stainless steel rivet with extremely smooth movement for minimum operator fatigue. Fitted with multi-component grips, an opening spring and opening limiter.

    78 03 140: Made from INOX tool steel, approx. 54 HRC cutting edge hardness

    78 61 140: Made from special tool steel, oil hardened in multiple stages. Approx. 64 HRC cutting edge hardness

    Specification:

    Length: 140mm
    Cutting Capacity : Soft 0.2-2.1mm, Medium-Hard 1.4mm

    PTDKPX7861140

    Learn More
  3. Knipex 78 03 140 Electronic Super Knips XL 140mm 78 03 140 SB

    SKU: PTDKPX7803140

    List Price:  

    £42.56

    Our Price:  

    £21.00

    Inc VAT:  

    £25.20

    Knipex Electronic Super Knips XL for ultra-fine cutting work, e.g. in electronics and fine mechanics and for cutting cable ties to length. With ground, very sharp cutting edges without bevel. Precision shaped tips cut wires resting on a board from 0.2mm.

    They have a shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. The joint features a stainless steel rivet with extremely smooth movement for minimum operator fatigue. Fitted with multi-component grips, an opening spring and opening limiter.

    78 03 140: Made from INOX tool steel, approx. 54 HRC cutting edge hardness

    78 61 140: Made from special tool steel, oil hardened in multiple stages. Approx. 64 HRC cutting edge hardness

    The Knipex 78 03 140 Electronic Super Knips are made from INOX tool steel, approx. 54 HRC cutting edge hardness

    Specification:

    Length: 140mm
    Cutting Capacity : Soft 0.2-2.1mm, Medium-Hard 1.2mm

    PTDKPX7803140

    Learn More
  4. Lindstrom Supreme Oblique Cutting Micro Bevel Cut Double Angled Head Nipper 108mm 7290

    SKU: PTDLIN7290

    List Price:  

    £84.34

    Our Price:  

    £52.41

    Inc VAT:  

    £62.89

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 108mm (4.25 in).
    Blade length (B): 8mm (0.31 in).
    Head width (C): 10.5mm (0.41 in).
    Head depth (G): 15mm (0.59 in).
    Cutting capacity: 0.35-1.25mm.

    Head type: Double angled.
    Cutting edge: Micro-bevel.

    Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7290

    Learn More
  5. Lindstrom Supreme Diagonal Cutting Micro Bevel Cut Tapered Head Nipper 109mm 7190

    SKU: PTDLIN7190

    List Price:  

    £77.88

    Our Price:  

    £48.39

    Inc VAT:  

    £58.07

    The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

    The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

    Length (A): 109mm (4.29 in).
    Blade length (B): 9mm (0.35 in).
    Head width (C): 9mm (0.35 in).
    Head depth (D): 6mm (0.24 in).
    Tip width: (F): 1.0mm (0.04 in).
    Cutting capacity: 0.2-1.25mm.

    Head type: Tapered
    Cutting edge: Micro-bevel.

    The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas.

    The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

    PTDLIN7190

    Learn More
  6. Lindstrom Diagonal Cutting Micro Bevel Nipper 110mm 8140

    SKU: PTDLIN8140

    List Price:  

    £65.80

    Our Price:  

    £40.88

    Inc VAT:  

    £49.06

    These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.

    The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.

    Ideal for wire harness work, and standard printed circuit board assembly.

    Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

    Lindstrom Diagonal Cutting

    Size: 110mm.
    Type: Micro Bevel Nipper.

    PTDLIN8140

    Learn More
  7. Knipex Electronics Flat Jaw Pliers Multi-Component Grip 115mm 35 12 115 SB

    SKU: PTDKPX3512115

    List Price:  

    £53.32

    Our Price:  

    £26.30

    Inc VAT:  

    £31.56

    The Knipex 35 Series Precision Pliers with 2-component, soft-grip handles. For very fine installation work in electronics and fine mechanics. Used for gripping, folding and bending. Ground gripping surfaces with edges carefully deburred. Low friction double spring for gentle smooth closing and opening. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    There are 3 versions in the 35 series - flat nosed, half round and round nosed. They all have precision shaped tips which are ideal for cutting close sitting wire from 0.2mm diameter.

    Flat rectangular jaws.

    PTDKPX3512115

    Learn More
  8. Knipex Electronics Half Round Jaw Pliers Multi-Component Grip 115mm 35 22 115 SB

    SKU: PTDKPX3522115

    List Price:  

    £53.32

    Our Price:  

    £26.30

    Inc VAT:  

    £31.56

    The Knipex 35 Series Precision Pliers with 2-component, soft-grip handles. For very fine installation work in electronics and fine mechanics. Used for gripping, folding and bending. Ground gripping surfaces with edges carefully deburred. Low friction double spring for gentle smooth closing and opening. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    There are 3 versions in the 35 series - flat nosed, half round and round nosed. They all have precision shaped tips which are ideal for cutting close sitting wire from 0.2mm diameter.

    Half round jaws.

    PTDKPX3522115

    Learn More
  9. Knipex ESD Electronics Half Round Jaw Pliers 115mm 35 22 115 ESDSB

    SKU: PTDKPX3522ESD

    List Price:  

    £57.80

    Our Price:  

    £28.53

    Inc VAT:  

    £34.24

    These Knipex 35 22 precision electronics half round jaw pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending.

    Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish, together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    Length: 115mm.

    PTDKPX3522ESD

    Learn More
  10. Knipex Electronics Round Jaw Pliers Multi-Component Grip 115mm 35 32 115 SB

    SKU: PTDKPX3532115

    List Price:  

    £53.32

    Our Price:  

    £26.30

    Inc VAT:  

    £31.56

    The Knipex 35 Series Precision Pliers with 2-component, soft-grip handles. For very fine installation work in electronics and fine mechanics. Used for gripping, folding and bending. Ground gripping surfaces with edges carefully deburred. Low friction double spring for gentle smooth closing and opening. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    There are 3 versions in the 35 series - flat nosed, half round and round nosed. They all have precision shaped tips which are ideal for cutting close sitting wire from 0.2mm diameter.

    Pointed round jaws for bending wire eyes.

    PTDKPX3532115

    Learn More
  11. Knipex ESD Electronics Round Nose Pliers 115mm 35 32 115 ESD

    SKU: PTDKPX3532ESD

    List Price:  

    £55.22

    Our Price:  

    £27.25

    Inc VAT:  

    £32.70

    These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending.

    Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish, together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    Length: 115mm.
    Pointed Round Jaws for bending wire eyes.

    PTDKPX3532ESD

    Learn More
  12. Knipex Electronics Oblique End Cutting Nippers 120mm 64 32 120

    SKU: PTDKPX6432120

    List Price:  

    £75.06

    Our Price:  

    £37.04

    Inc VAT:  

    £44.45

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 120mm.
    End diagonal cutter with small bevel - 15 .

    PTDKPX6432120

    Learn More
  13. Knipex Electronics Diagonal End Cutting Nippers Short Head 115mm 64 42 115

    SKU: PTDKPX6442115

    List Price:  

    £73.64

    Our Price:  

    £36.34

    Inc VAT:  

    £43.61

    These Knipex diagonal end cutting nippers are top quality precision pliers for ultra fine cutting work, in electronics and fine mechanics.

    There are 2 versions in the 64 range - a 120mm 15 Angled head, and a 115mm 27 Angled head. Both versions have precision shaped tips which are ideal for cutting close sitting soft wire up to 1.5mm in diameter.

    These Knipex electronic pliers are jointed with a stainless steel rivet for added strength and easy movement. The cutting edges are additionally induction hardened for durability and a longer life.

    These pliers have an extremely smooth, play-free joint with a stainless steel rivet for minimum operator fatigue. The handles are coated with soft plastic which is easy on the hand.

    Both models have precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 56HRc. They are made from special tool steel which is oil hardened for added strength and durability and have polished heads.

    Length: 115mm.
    End oblique cutter, short head with small bevel 27 .

    PTDKPX6442115

    Learn More
  14. Knipex Electronic Diagonal Cut Pliers Extra Slim PVC Grip 125mm 75 02 125 SB

    SKU: PTDKPX7502125

    List Price:  

    £64.90

    Our Price:  

    £32.03

    Inc VAT:  

    £38.44

    The Knipex 75 02 125 extra slim diagonal cutters are constructed from solid style forged top quality steel with precision non-slip tips for added strength and durability. With high quality material and precise workmanship for long service life. Clean cutting at cutting edge tips for hard or soft wire or thin copper wires. With narrow head style for use in confined areas.

    Like most of the Knipex range of pliers, all components have oil hardened edges and hardened electric steel forged to approximately 64 HRc. They are ideal for cutting soft wire close to a flat surface with the bevelled blade. The cutters have a hardened head and plastic PVC coated cushion grip handles for added durability and comfort.

    Length: 125mm.
    Cutting Capacity: Piano: 0.4mm, Hard: 0.6mm, Medium: 1.0mm, Soft: 0.2-1.3mm.

    PTDKPX7502125

    Learn More
  15. Knipex ESD Electronics Diagonal Cutters - Round Head Small Bevel 115mm 77 02 115 ESD

    SKU: PTDKPX7702ESD

    List Price:  

    £64.14

    Our Price:  

    £31.64

    Inc VAT:  

    £37.97

    Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC.

    Cutting Capacity:

    77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

    77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.

    77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

    Knipex 77 02 115 ESD Electronic diagonal cutter with a round head and small bevel. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools.

    ESD versions discharge the electrostatic energy correspondingly slowly and under control to protect endangered components.

    77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

    PTDKPX7702ESD

    Learn More
No more product
Electronic Cutters & Nipper Pliers
© 2021 Building Supplies Direct Online Ltd
VAT Number: 100 5143 84