Cable Cutters & Shears

The Bahco 1520G Power cutter with centric precision cutting edges. Forged with cutting edges for piano, hard and soft wire. High leverage gives exceptional cutting performance with minimum effort. The precision cutting edges are additionally induction hardened 63-64 HRC.

Made from chrome vanadium steel, the handles in two-component thermoplastic elastomer surface on tough polypropylene which gives a superior grip.

PTDBAH1520G

The Bahco 2233 Series Heavy-Duty Cable Cutters/Strippers for cutting copper and aluminium cables. They are made from drop-forged, carbon steel. The forged surfaces are black finished and mirror polished. The handles are fitted with PVC dipped sleeves for a comfortable grip.

This Bahco 2233D Heavy-Duty Cable Cutter/Stripper has the following specification:

Length: 160mm (6.1/4in).
Cutting Capacity: 10mm.

PTDBAH2233D160

The Bahco 2233 Series Heavy-Duty Cable Cutters/Strippers for cutting copper and aluminium cables. They are made from drop-forged, carbon steel. The forged surfaces are black finished and mirror polished. The handles are fitted with PVC dipped sleeves for a comfortable grip.

The Bahco 2233D Heavy-Duty Cable Cutter/Stripper has the following specification:

Length: 200mm (8in).
Cutting Capacity: 13mm.

PTDBAH2233D200

The Bahco 2233 Series Heavy-Duty Cable Cutters/Strippers for cutting copper and aluminium cables. They are made from drop-forged, carbon steel. The forged surfaces are black finished and mirror polished. The handles are fitted with PVC dipped sleeves for a comfortable grip.

The Bahco 2233D Heavy-Duty Cable Cutter/Stripper has the following specification:

Length: 240mm (9.1/2in).
Cutting Capacity: 16mm.

PTDBAH2233D240

Cable Cutter for cutting Aluminium/Copper cables (telephone cables, electrical cables etc) with or without messenger wire.

Recommended maximum capacity: Alu/copper diameter of 30mm with a messenger wire (1800 N/mm2) of 6mm.

Warning: for a maximum service life, the sharpened parts of the blades must never be used on ferrous material. For this purpose, use the notches on the blades.

PTDBAH2520

Knipex Electricians Shears have precisely ground blades with fine serration for a clean, non-slip cut. The cutting edges are made from stainless steel, hardness of 56 HRC, and feature an integrated cable cutter. The handles are fitted with multi-component grips, fibreglass-reinforced.

Supplied with a plastic belt case.

Model 95 05 155 has a crimp area for end sleeves (ferrules) up to 6.0mm.

1 x Knipex 95 05 155 Electricians Shears 155mm

PTDKPX9505155

The Knipex 95 cable shears with dipped PVC handles are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors.

These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material.

The KPX 95 11 cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings.

Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. Also fitted with PVC coated handle for added comfort and grip.

Length: 165mm.
Weight: 215g.

1 x Knipex Cable Shears PVC Grip 160mm (6.1/4in)

PTDKPX9511165

The Knipex 95 12 200 cable shears with twin cutting edges are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors.

These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material.

The 95 12 200 200mm cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings.

Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life.

Length: 200mm (8in).
Cutting Capacity: 20mm.

These Knipex Cable Shears are fitted with PVC coated handles for added comfort and grip.

PTDKPX9511200

The Knipex 95 12 200 cable shears with twin cutting edges are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors.

These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material.

The 95 12 200 200mm cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings.

Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life.

Length: 200mm (8in).
Cutting Capacity: 20mm.

These Knipex Cable Shears are fitted with multi-component handles.

PTDKPX9512200

The Knipex 95 cable shears with dipped PVC handles are ideal for cutting copper and aluminium cables, single and multiple wire cables but are not suitable for steel wire and hard drawn copper conductors.

These Knipex cable shears have precision ground and hardened blades, that will give the user a good professional finish to any job application, with clean and smooth cutting without crushing and deformation of the desired material.

The KPX 95 11 cable cutters can be easily operated with one-hand, low effort required due to high transmission ratio and new blade geometry, there is a protective guard to help stop pinching of the hands, an adjustable screw joint for tension settings.

Made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. Also fitted with PVC coated handle for added comfort and grip.

Length: 165mm.
Weight: 215g.

1 x Knipex Cable Shears With Return Spring PVC Grip 160mm (6.1/4in)

PTDKPX9521165