Pliers Strippers Snips & Croppers

IRWIN Vise-Grip Groove Joint Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces.

The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers.

Press-n-slide button adjusts the jaws 2x faster than traditional groove joint pliers.

Anti-pinch non-slip ProTouch grips provide control, comfort, and less hand fatigue.

Length: 250mm (10 in)

Capacity: 51mm (2 in)

PTDVIS10505500

IRWIN Vise-Grip Groove Joint Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces.

The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers.

Press-n-slide button adjusts the jaws 2x faster than traditional groove joint pliers.

Anti-pinch non-slip ProTouch grips provide control, comfort, and less hand fatigue.

Length: 300mm (12 in).

Capacity: 57mm (2 1/4 in).

PTDVIS10505502

IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.

Moulded 1 component handle that are comfortable, and feature pull-resistant handles.

Cable cutter: up to 1.6 mm cables.

1 x Visegrip Long Nose Pliers 150mm (6in)

PTDVIS10505503

A flat cutter for wire with hardened steel plate jaws.
The handles are zinc plated and are fitted with a return spring.

Used for cutting soft wire.
Unsleeved.

PTDMAU2850100

High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic.

1 x Stanley Green Offset Aviation Snip Right Cut 250mm (10in)

PTDSTA214568

High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic.

1 x Stanley Red Aviation Snip Left Cut 250mm (10in)

PTDSTA214562

These Lindstrom Supreme Flat Nose Pliers are produced from high-performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved.

The pliers smooth jaws minimise the risk of damage and scratching to the wire.

Length (A): 120mm (4.72in).
Jaw length (B): 20mm (0.79in).
Head width (C): 9mm (0.35in).
Head depth (D): 6mm (0.24in).
Tip width (E): 1.2mm (0.05in).
Tip depth (F): 3.2mm (0.13in).

PTDLIN7490

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges.

The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

Length (A): 109mm (4.29 in).
Blade length (B): 9mm (0.35 in).
Head width (C): 9mm (0.35 in).
Head depth (D): 6mm (0.24 in).
Tip width: (F): 1.0mm (0.04 in).
Cutting capacity: 0.2-1.25mm.

Head type: Tapered
Cutting edge: Micro-bevel.

The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas.

The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are pinched, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

PTDLIN7190

IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue.

Moulded 1 component handle that are comfortable, and feature pull-resistant handles.

Cable cutter: up to 1.6 mm cables.

Size: 200mm (8 in)

PTDVIS10505504

The Stanley 484488 FatMax pliers set is ideal for any type of trade or just for around the home.

This 3-piece set of Stanley pliers consists of a combination pliers, a long nosed pliers and diagonal side cutters and is suitable for a wide range of applications. Each of the pliers are made from hardened steel to provide the utmost strength and a longer operational life. Come with soft cushion grip handles which provide the user with a good positive grip and help to ease user fatigue in prolonged use.

Set contains:

1 x Long Nose Pliers 155mm.
1 x Diagonal Cutting Plier 165mm.
1 x Combination Plier 165mm.

PTDSTA484488

The Monument Wide Jaw Plumbing Pliers are drop forged. They have a 5-position adjustment with toothed jaws for loosening and tightening round fittings on plastic waste pipes etc.

Length: 230mm (9in).
Max Opening: 75mm (3in).

;

PTDMON2029

The Bahco 2233 Series Heavy-Duty Cable Cutters/Strippers for cutting copper and aluminium cables. They are made from drop-forged, carbon steel. The forged surfaces are black finished and mirror polished. The handles are fitted with PVC dipped sleeves for a comfortable grip.

PTDGRPBAH2233D160

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 160mm (6.1/4in)

PTDSTA089858

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 200mm (8in)

PTDSTA089859

These Stanley FatMax Diagonal Cuttting Pliers have an angled head for flush cuts. Made from heat treated high chrome steel with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a secure grip and increased comfort.

Ideal for cutting piano wire, copper wire and aluminium.

1 x Stanley FatMax Angled Diagonal Cutting Pliers 160mm (6.1/4in)

PTDSTA089860