1-2in Drive Sockets - Metric

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 15mm.
Length: 38mm.

PTDSTW5015

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 26mm.
Length: 42mm.

PTDSTW5026

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 27mm.
Length: 45mm.

PTDSTW5027

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 28mm.
Length: 45mm.

PTDSTW5028

Stahlwille Series 50 Bi-Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Bi-Hexagon Socket 1/2in Drive.

Size: 32mm.
Length: 47mm.

PTDSTW5032

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 15mm.
Length: 38mm.

PTDSTW5215

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 20mm.
Length: 42mm.

PTDSTW5220

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 26mm.
Length: 42mm.

PTDSTW5226

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 30mm.
Length: 45mm.

PTDSTW5230

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 32mm.
Length: 47mm.

PTDSTW5232

Stahlwille Series 52 Hexagon sockets have 1/2in square drives and come in metric sizes. They are made from HPQ high performance quality steel and are chrome plated.

Stahlwille HPQ sockets are manufactured from selected tough steel alloys. This results in extremely high load capacity with exceptionally thin rings and walls. The sockets are free from cadmium and therefore suitable for use on titanium alloys and titanium fasteners, such as those used in the aerospace industry where safety is crucial.

The sockets are equipped with anti-slip drives to permit high transmission of forces to the lands of the nuts and bolts without damaging them.

Manufactured to DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M.

MADE IN GERMANY.

Stahlwille Hexagon Socket 1/2in Drive.

Size: 34mm.
Length: 47mm.

PTDSTW5234

These Faithfull Hexagon Sockets are professional, high quality metric sockets, forged from chrome vanadium steel which is hardened, tempered and satin chrome plated for corrosion protection.

1/2 inch square drive is the most popular drive size used in the UK and Ireland, due to its strength and durability. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.

PTDGRPFAISOC128

SBS80 series metric sockets featuring the dynamic drive profile, for higher efficiency and an optimum grip without damaging the bolts and nuts.

Manufactured from vanadium-extra steel with a nickel and matt chrome-plated finish.

1/2in square drive.

PTDGRPBAH12SM8

These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.

The sockets are available in a range of metric sizes.

Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.

PTDGRPFCMS8

The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only.

ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.

PTDGRPBRIE117051B