Hexagon Keys

Stanley Hex Key Set manufactured from High Tensile steel for strength and resilience.

Comes in folding open case.

Set of 8 Keys.

PTDGRPSTA069251

Stanley Ball Ended hexagon key set with standard Hexagon end on the short arm and ball end on the long arm. All keys are stored in a size marked plastic holder.

PTDGRPSTA069256

Stanley 8 or 9 Piece Folding Hexagon Key Set with a bi-material grip for increased comfort and a chamfered tip to aid location. With a phosphate finish for corrosion protection.

PTDGRPSTA269265

These Faithfull L-shaped long hex keys have ball ends that permit up to a 30 offset alignment for greater access to difficult to reach fixings. Their longer blades provide both access to deeper set fixing and additional torque if needed when fitting or removing bolts.

The keys are manufactured from Chrome Vanadium steel and are heat treated for strength and durability. They have a satin chrome finish for rust prevention. The set is supplied in a sturdy slide to open plastic storage caddy.

This 9 piece set contains the following sizes:
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

PTDFAIHKS9MBLA

The Facom Long Metric Head Torx Hex Key comes packed in a compact wallet for easy selection of the dimension required. They are also compliant with Torx and Resistorx specifications. The hex keys in this set have long spherical heads.

Sizes: TX10, TX15, TX20, TX25, TX27, TX30, TX40 & TX45.

PTDFCM89SJP8A

Teng Tools 10 piece set of hex keys are made from chrome vanadium steel for increased strength and durability, finished in Black and supplied on a handy holding ring.

This Teng Tools 10 piece set of hex keys comprises the following sizes:

1/16in, 5/64in, 3/32in, 1/8in, 5/32in, 3/16in, 7/32in, 1/4in, 5/16in and 3/8in.

PTDTEN1424

Teng Tools 10 piece set of hex keys are made from chrome vanadium steel for increased strength and durability, finished in Black and supplied on a handy holding ring.

This Teng Tools 10 piece set of hex keys comprises the following sizes:

1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm and 10mm.

PTDTEN1425

The Teng Ball point hex keys are made from chrome vanadium steel for increased strength and durability and are supplied in a folding plastic holder for convenient storage.

Each key has a short arm and a long arm. The short arm allows excellent leverage and torque, whilst the longer arm allows access in more difficult to reach areas. In addition the long arms have a ball point head, which permits turning at up to a 30 angle.

This Teng Tools 9-piece set of hex keys comprises the following sizes:
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

PTDTEN1479MM

Teng Tools 9 Piece Hexagon Key Set with ball point head on the long end which permits turning at 30 angle. Made from chrome vanadium steel with a black finish. Supplied in a folding plastic holder.

Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 10mm.

PTDTEN1479MMA

This Teng Tools 9 piece set of hexagon keys is supplied in a handy folding plastic holder for easy storage. The keys are made from chrome vanadium steel for strength and durability. They have a long arm which allows access to more difficult to reach places, and a short arm which ensures excellent torque and leverage.

Colour: black.

The Teng Tools TEN1479MMR Hex Key Set comprises the following key sizes:
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

PTDTEN1479MMR

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510503 T Handle Hex Driver has the following specification:
Size: 3.0mm.
Short arm length: 12mm.
Long arm length: 100mm.

PTDTEN510503

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510504 T Handle Hex Driver has the following specification:
Size: 4.0mm.
Short arm length: 12mm.
Long arm length: 100mm.

PTDTEN510504

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510505 T Handle Hex Driver has the following specification:
Size: 5.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510505

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510506 T Handle Hex Driver has the following specification:
Size: 6.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510506

This Teng Tools Hex key with T-handle has a short arm and a long arm. The short arm allows excellent leverage, allowing easy tightening and loosening. The long arm of the Hex key has a ball point head, which allows a working angle of up to 30 degrees and therefore improves access.

Manufactured from chrome vanadium steel for toughness and durability.

The TEN510507 T Handle Hex Driver has the following specification:
Size: 7.0mm.
Short arm length: 15mm.
Long arm length: 150mm.

PTDTEN510507