Flat Files

Bahco Flat files do the same jobs as hand files but are sometimes preferred because the tapered shape enables the user to reach into angles and corners more easily.

Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

PTDGRPBAHFB4

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.

Slightly tapered in width and thickness. Suitable for general work on iron and steel.

Double cut on both sides and single cut on both edges.

PTDGRPBAHFSC4

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily.

Slightly tapered in width and thickness. Suitable for general work on iron and steel.

Double cut on both sides and single cut on both edges.

PTDGRPBAHFSM6

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 150mm (6in)
Cut flat bastard
Tanged.

PTDNICFB6

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 200mm (8in)
Cut flat bastard
Tanged.

PTDNICFB8

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Size 250mm (10in)
Cut flat bastard
Tanged

PTDNICFB10

For general work on iron and steel slightly tapered in width and thickness.

Double cut on both sides, and single cut on both edges.

Size 150mm (6in)
Cut flat second
Tanged

PTDNICFSC6

For general work on iron and steel slightly tapered in width and thickness.

Double cut on both sides, and single cut on both edges.

Size 200mm (8in)
Cut flat second
Tanged

PTDNICFSC8

For general work on iron and steel slightly tapered in width and thickness.

Double cut on both sides, and single cut on both edges.

Size 250mm (10in)
Cut flat second
Tanged.

PTDNICFSC10

For general work on iron and steel.
Slightly tapered in width and thickness.
Double cut on both sides, and single cut on both edges.

Size 150mm (6in)
Cut flat smooth
Tanged

PTDNICFSM6

For general work on iron and steel.
Slightly tapered in width and thickness.
Double cut on both sides, and single cut on both edges.

Size 200mm (8in)
Cut flat smooth
Tanged

PTDNICFSM8

For general work on iron and steel.
Slightly tapered in width and thickness.
Double cut on both sides, and single cut on both edges.

Size 250mm (10in)
Cut flat smooth
Tanged

PTDNICFSM10

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.

Smooth Cut: approx. 62 teeth per 25mm (Fine).
Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

PTDGRPNICFB6

For general work on iron and steel slightly tapered in width and thickness.

Double cut on both sides, and single cut on both edges.

PTDGRPNICFSC6

For general work on iron and steel.
Slightly tapered in width and thickness.
Double cut on both sides, and single cut on both edges.

PTDGRPNICFSM6