Files

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

The FAIFIHRSC10 half round engineers file has the following specifications:
Blade Length: 250mm (10in).
Blade Width: 24mm (7/8in).

PTDFAIFIHRSC10

These Faithfull Engineers Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

The FAIFIHB12 hand file has the following specifications:
Cut: Bastard.
Blade Length: 300mm (12in).
Blade Width: 27mm (1.1/16in).

PTDFAIFIHB12

These Faithfull Engineers Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

The FAIFIHB10 hand file has the following specifications:
Cut: Bastard.
Blade Length: 250mm (10in).
Blade Width: 24mm (15/16in).

PTDFAIFIHB10

This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.

The FAIFIHRSC12 half round engineers file has the following specifications:
Length: 300mm (12in).
Blade Width: 29mm (1.1/8in).

PTDFAIFIHRSC12

These Faithfull Engineers Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

The FAIFIHSC10 hand file has the following specifications:
Cut: Second Cut.
Blade Length: 250mm (10in).
Blade Width: 23mm (15/16in).

PTDFAIFIHSC10

These Faithfull Engineers Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

The FAIFIHSC12 hand file has the following specifications:
Cut: Second Cut.
Blade Length: 300mm (12in).
Blade Width: 25mm (1in).

PTDFAIFIHSC12

This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle.

Second Cut: approx. 36 teeth per 25mm (Medium).

The FAIFIRSC12 engineers file has the following specifications:
Cut: round second.
Blade Length: 300mm (12in).
Blade Width: 10mm (3/8in).

PTDFAIFIRSC12

A 6 piece set packed in a wallet containing one of each 14cm needle files: Equalling, half-round, flat, round, square and three-square.

Cut: Fine.
Size: 5in.
Set of 6.

PTDNICMFSET

A rectangular shaped, tanged horse rasp, single cut on both edges with fine rasp teeth on one face and the special Magicut file teeth on the other.

Cuts much faster than conventional horse rasps.

Length is approximately 350mm (14in).
Tanged.

PTDNICMHR14

Stanely 3 Piece Handled File Set for woodwork applications. High carbon steel blade for strength and durability. Fitted with a bi-material handle. With a hang hole for convenient storage. These rasps will give a good professional finish to any work piece. Contains:

1 x Round Rasp 200mm (8in)
1 x Half-Round Rasp 200mm (8in)
1 x Flat Rasp 200mm (8in)

PTDSTA022477

Stanely 3 Piece Handled File Set for metalwork applications. High carbon steel blade for strength and durability. Fitted with a bi-material handle. With a hang hole for convenient storage. These files will give a good professional finish to any work piece. Contains:

1 x Flat File 200mm (8in)
1 x Half-Round File 200mm (8in)
1 x Three-Square 200mm (8in)

PTDSTA022464

The Bahco Handled Hand Cut File 1-100 with a soft grip ERGO handle are perfect for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file may also be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate.

Edges and surfaces parallel. Surfaces double cut, one edge uncut, one edge single cut.

Second Cut: approx. 36 teeth per 25mm (Medium).
Bastard Cut: approx. 26 teeth per 25mm (Coarse).

PTDGRPBAH11000612

The Bahco Chainsaw File 168 has smooth single cut teeth for sharpening round hooded chainsaw teeth.

Safe point and special tooth construction for rapid cutting.

PTDGRPBAHCS18

Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle.

Supplied in a blister pack.

PTDGRPFAIPPC532

Curved tooth files are made from alloy steel and have teeth which are undercut resulting in faster cutting with less effort.

They may be used on all materials from aluminium to hardest steel without clogging.

The undercut and generous radius at the root of the teeth enables the file to clear itself whilst in use.

Dreadnought files feature a curved tooth across the blade.

PTDGRPFILDTH98