71 items

Sheet Metal Punches

Sheet Metal Punches
View as Grid List

71 items

Set Ascending Direction Set Descending Direction
  1. QMax Sheet Metal Punch 1.1/16in QMA-1.1/16IN

    SKU: PTDQMA1716

    £11.64

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1.1/16 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA1716

    Learn More
  2. QMax Sheet Metal Punch 1 1/8in QMA-1.1/8IN

    SKU: PTDQMA118

    £11.92

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size.1 1/8in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA118

    Learn More
  3. QMax Sheet Metal Punch 1.3/16in QMA-1.3/16IN

    SKU: PTDQMA1916

    £12.54

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size.1 3/16in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA1916

    Learn More
  4. QMax Sheet Metal Punch 1.1/4in QMA-1.1/4IN

    SKU: PTDQMA114

    £12.96

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 1/4 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA114

    Learn More
  5. QMax Sheet Metal Punch 1.3/8in QMA-1.3/8IN

    SKU: PTDQMA138

    £14.46

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 3/8 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA138

    Learn More
  6. QMax Sheet Metal Punch 1.1/2in QMA-1.1/2IN

    SKU: PTDQMA112

    £16.76

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 1/2 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA112

    Learn More
  7. QMax Sheet Metal Punch 1.3/4in QMA-1.3/4IN

    SKU: PTDQMA134

    £20.21

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 3/4 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA134

    Learn More
  8. QMax Sheet Metal Punch 3/4in QMA-3/4IN

    SKU: PTDQMA34

    £9.91

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 3/4 in.
    Key Type. 7/32 in hexagonal wrench

    PTDQMA34

    Learn More
  9. QMax Sheet Metal Punch 13/16in QMA-13/16IN

    SKU: PTDQMA1316

    £9.91

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 13/16 in.
    Key Type. 7/32 in hexagonal wrench

    PTDQMA1316

    Learn More
  10. QMax Sheet Metal Punch 7/8in QMA-7/8IN

    SKU: PTDQMA78

    £10.63

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size 7/8 in.
    Key Type. 7/32 in hexagonal wrench

    PTDQMA78

    Learn More
  11. QMax Sheet Metal Punch 1in QMA-1IN

    SKU: PTDQMA1

    £11.11

    A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without key, which should be ordered separately.

    To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.

    Size. 1 in.
    Key Type.B. 5/16 in hexagonal wrench

    PTDQMA1

    Learn More
  12. QMax Sheet Metal Punch 19mm QMA-19M

    SKU: PTDQMA19M

    £9.91

    A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge.

    The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches are sold singly without key, which should be ordered separately.

    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result.

    Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.

    Size.19.0mm.
    Key Type.MB. 8mm hexagonal wrench

    PTDQMA19M

    Learn More
  13. QMax Square Sheet Metal Punch 19mm QMA-SQ19MM

    SKU: PTDQMASQ19

    £69.55

    A quick and easy way to cut clean square holes in sheet metal up to 16 gauge.

    The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches boxed singly without spanner, which should be ordered separately.

    Size.19.0mm.Square.
    Spanner Operated 5/8in AF.

    PTDQMASQ19

    Learn More
  14. QMax Sheet Metal Punch 20.4mm QMA-20.4M

    SKU: PTDQMA204M

    £10.63

    A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge.

    The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches are sold singly without key, which should be ordered separately.

    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result.

    Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.

    Size.20.4mm.
    Key Type.MB. 8mm hexagonal wrench

    PTDQMA204M

    Learn More
  15. QMax Sheet Metal Punch 21mm QMA-21M

    SKU: PTDQMA21M

    £10.63

    A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge.

    The special design allows even load during cutting and produces a burr free hole that needs no extra finishing.

    Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting.

    All punches are sold singly without key, which should be ordered separately.

    Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result.

    Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.

    Size.21.0mm.
    Key Type.MB. 8mm hexagonal wrench

    PTDQMA21M

    Learn More
No more product
Sheet Metal Punches
© 2020 Building Supplies Direct Online Ltd
VAT Number: 100 5143 84