Punches

The Stanley FatMax Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping.

Specification

Nail Sizes: 1/32, 2/32in.

PTDSTA158501

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G16 Sheathed Punch has the following specifications:
Point diameter: 15.70mm.
Length: 310mm.

PTDFCM249G16

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G2 Sheathed Punch has the following specifications:
Point diameter: 1.95mm.
Length: 140mm.

PTDFCM249G2

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G10 Sheathed Punch has the following specifications:
Point diameter: 9.80 mm.
Length: 230mm.

PTDFCM249G10

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G3 Sheathed Punch has the following specifications:
Point diameter: 2.95mm.
Length: 150mm.

PTDFCM249G3

This Facom 11 piece shock absorbing punch set contains drift, nail and centre punches.

Contains:

6 x Drift punches 2, 3, 4, 5, 6 and 8mm.
4 x Nail punches 4, 5, 6 and 8mm.
1 x Centre punch 6mm.

PTDFCMMODCG

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G12 Sheathed Punch has the following specifications:
Point diameter: 11.80mm.
Length: 280mm.

PTDFCM249G12

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G14 Sheathed Punch has the following specifications:
Pointed diameter: 13.80mm.
Length: 290mm.

PTDFCM249G14

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G6 Sheathed Punch has the following specifications:
Point diameter: 5.90mm.
Length: 210mm.

PTDFCM249G6

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G5 Seathed Punch has the following specifications:
Point diameter: 4.95mm.
Length: 200mm.

PTDFCM249G5

The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption.

Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.

The FCM249G4
Point diameter: 3.95mm.
Length: 190mm.

PTDFCM249G4

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.
One piece forging with ground and polished tapered section.

Size 6mm (1/4 in)

PTDPRI94006

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.
One piece forging with ground and polished tapered section.

Size 8mm (5/16 in)

PTDPRI94008

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.
One piece forging with ground and polished tapered section.

Size 10mm (3/8 in)

PTDPRI94010

Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.
One piece forging with ground and polished tapered section.

Size 11mm (7/16 in)

PTDPRI94011