Gauges - Feeler

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Tapered leaves 1/2-1/4 x 3 1/32 in

No. of leaves: 9

Range: 0.0015 - 0.015 in ( 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

PTDSTR172AT

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Tapered leaves 1/2-1/4 x 6 in

No. of leaves: 8

Range: 0.002 - 0.015 in ( 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

PTDSTR172CT

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Tapered leaves 12.7-7 x 114mm

No. of leaves: 9

Range 0.04 - 0.3mm (0.04-0.08 by 0.01mm steps, 0.10, 0.15, 0.20 and 0.30mm).

PTDSTR172MBT

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Straight leaves 12.7 x 77mm

No. of leaves: 13

Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)

PTDSTR173MA

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Tapered leaves 12.7-7 x 77mm,

No. of leaves: 13

Range 0.03 - 0.5mm (0.03 to 0.10 by 0.01mm steps, 0.15, 0.20, 0.30, 0.40 and 0.50mm).

PTDSTR173MAT

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Tapered leaves 12.7-7 x 152mm

No. of leaves: 13

Range 0.03 - 0.5 mm ( 0.03 to 0.10 by 0.01mm steps, 0.15, 0.20, 0.30, 0.40, 0.50mm).

PTDSTR173MCT

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Straight leaves 1/2 x 4 1/2 in

No. of leaves: 13

Range: 0.0015 - 0.200 Inch (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010 to 0.040 by 0.01 in steps , 0.075, 0.100, 0.200 in).

PTDSTR467

Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.

Millimetre Reading Gauges with Straight leaves - Sized 12.7 x 114mm

No. of leaves: 13

Range 0.04 - 5mm (0.04- 0.08 by 0.01mm steps 0.10, 0.15, 0.20,0.30, 1.0, 2.0, 3.0 and 5.0mm).

PTDSTR467M

Used to adjust tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. Locking device on all sets.

Inch Reading Gauges with Straight leaves 1/2 x 3 1/32 in

No. of leaves: 26

Range: 0.0015 - 0.025 in ( 0.0015, 0.002, 0.0025, and 0.003 to 0.025 by 0.001 in steps)

PTDSTR66

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Inch Gauge 12 in long

Thickness: 0.001 in

PTDSTR6671

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Inch Gauge 12 in long

Thickness: 0.010 in

PTDSTR66710

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Inch Gauge 12 in long

Thickness: 0.0015 in

PTDSTR667112

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Thickness: 0.0005 in

PTDSTR66712

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Inch Gauge 12 in long

Thickness: 0.012 in

PTDSTR66712FS

Feeler strips are widely used in automotive, aviation, diesel and farm equipment manufacture and service. Also used in jig, fixture and gauge work. Packed individually in an envelope.

Length: 300mm (12in).

Inch Gauge 12 in long

Thickness: 0.002 in

PTDSTR6672