Engineering Tools

The Starrett Prosite Protractor takes the error-prone calculations out of the process of mitre cuts. Simply set your saw to the angle that you read. Upside down or backwards, the reading is always correct. This easy-to-use tool has two scales. The Mitre Cut arrow and internal scale indicate the exact mitre saw setting for an accurate mitre joint every time. The Single Cut arrow and the outer scale indicate the exact mitre saw setting for fitting a single work piece to an angle.

It is ideal for carpenters, plumbers and all building trades that require the measuring and transfer of angles.

Length: 300 mm (12in)

PTDSTR505A12

The Starrett Prosite Protractor takes the error-prone calculations out of the process of mitre cuts. Simply set your saw to the angle that you read. Upside down or backwards, the reading is always correct. This easy-to-use tool has two scales. The Mitre Cut arrow and internal scale indicate the exact mitre saw setting for an accurate mitre joint every time. The Single Cut arrow and the outer scale indicate the exact mitre saw setting for fitting a single work piece to an angle.

It is ideal for carpenters, plumbers and all building trades that require the measuring and transfer of angles.

Length: 175 mm (7in)

PTDSTR505A7

Pocket scriber with carbide points which can be reversed, telescoped into the handle and locked by the chuck when not in use. Supplied with carbide scriber point.

Point length: 72mm (2.7/8in) with Carbide Point.
Handle diameter: 9.5mm (3/8in).

PTDSTR70BX

The Starrett H11-1224 square head is made from cast iron with a black wrinkle finish.

Fits blades 12in, 24in, 300mm & 600mm.

PTDSTRH111224

Cast iron protractor head with a black wrinkle finish.
Fits blade size: 300mm (12 in) and 600mm (24 in)

PTDSTRPR1224W

The Starrett C11-1224 Centre Head is made from cast iron with a black wrinkle finish.

Fits blades 12in, 24in, 300mm & 600mm.

PTDSTRC111224

The Starrett C493ME Protractor & Depth Gauge features an angular measurement range of 0-180 in opposite directions allowing the direct reading of angles and supplementary angles. Depths are measured from a 150mm (6in) blade.

Graduation: 1/2mm (64ths).

PTDSTRC493ME

Supplied with accurate ground and graduated main vial and cross test vial. Adjustable to a positive setting the main vial is housed in a satin finished brass tube with a cover to prevent breakage. The level features an involute groove running the base length providing a reliable seat on cylindrical workpieces.
Size: 150mm (6 in).

PTDSTR986

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch.

Whitworth standard - 55 threads

No. of leaves: 30

TPI range: 3 1/2 - 60

With positive stop.

PTDSTR476

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch.
International metric standard - 60 threads.
No. of leaves: 28.
Pitch range: 0.5 - 11.5mm.
Locking device and 60 gauge.

PTDSTR159M

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required.

Punch length: 125mm (5 in).
Punch diameter: 14mm (9/16 in).

Spare points also available STR18APOINT

PTDSTR18A

Double ended scriber having two points, one bent at 90 giving improved access in confined spaces.

Length: 177mm (7in).

PTDPRI122

Combination scriber with a knurled body to give a positive finger grip and sharp ground, heat treated points to give a long life. Having one point and one knife edge, it is ideal for marking wood, plastic and laminates.

Length: 165mm (6.1/2in).

PTDPRI129

The Faithfull Internal Spring Calipers, have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.

PTDGRPFAICALIN3

The Faithfull External Spring Calipers have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.

PTDGRPFAICALOUT3