Detectors & Testers
- Stanley Moisture Meter 0-77-030
The Stanley Intelli Level Moisture Meter gives a % moisture reading based on electrical resistance across two pins. LCD screen with dual measurement bar graph. Measures moisture in wood: 6-44%, and other building materials: 0.2-2%.
Power: 3 x Button Cell batteries (supplied).
PTDINT077030Learn MoreFaithfull 3-in-1 Detector Stud Metal & Live Wire TS533
This Faithfull versatile advanced electronic detector helps avoid costly mistakes caused by drilling into concealed power cables, gas or water pipes and removes any guesswork when securing fixtures, hanging pictures or fitting shelving by pinpointing a solid base for fixing.
The detector can be used to detect and locate wooded studwork, metal and AC voltage, providing a clear indication of concealed objects using the LED and buzzer indicator system. A marking groove is also provided at the top of the detector so that the surface can be marked prior to any drilling, nailing or screwdriving.
Finds wood and metal studs.
Finds and identifies a stud centre.
Finds AC voltage and scans to trace live cables.
Metal scanning to find nails, pipes, rebar and other hidden metal objects.
LED and buzzer Indicators.
9V 6F22 Alkaline battery included.
This detector may be used to carry out the following operations:
Detect metal pipes in concrete, behind ceilings, floors and walls.
Detect wooden studwork behind ceilings and walls.
Detect electrical box, exhaust vent, conduit, rebar, and ducting.
Detect and trace live cable behind ceilings, floors and walls.
Approximate detection depths:
Stud mode: Wood stud of 30x30mm: 14mm.
Metal mode: Iron pipe of dia. 25mm: 25mm.
AC mode: Typical depth of 50mm for 90-250V at 50-60Hz.
PTDFAIDET31Learn MoreFaithfull Battery Tester for AA, AAA, C, D & 9V BT1
This Faithfull Battery Tester is simple and easy-to-use on most types of standard domestic and rechargeable batteries. It helps to ensure the batteries are fully charged and ready for use. A simple analogue needle display indicates the power level of the batteries (good, low or replacement required). An adjustable arm allows the tester to accommodate the testing of D, C, AA, AAA, 9V 6F22 and 1.5V button cell batteries, and folds down for easy storage.
Analogue needle indicator.
Tests D, C, AA, AAA, 9V 6F22 batteries.
Tests 1.5V button cell batteries.
The tester is activated by the battery being checked. Keep test time as short as possible to avoid unnecessary battery drain.
PTDFAIDETBATLearn MoreFaithfull Microwave Leak Detector 3MHz - 3GHz EM0328
It is important to regularly check for possible electromagnetic leaks from Microwave ovens. Excessive leakage can be a problem and of particular danger to expectant mothers. This Faithfull detector can be used to verify any leak from Microwave ovens and other sources within a few minutes. The detectors analogue display will clearly show if an electromagnetic field leak is present. The Green sector indicates that the product is safe, the Red sector warns that a leak is present which could be harmful to humans. The detector may also be used to check other items that generate an electromagnetic field such as Mobile Phones and Cameras.
Analogue needle indicator.
Easy read SAFE and CAUTION warning.
Compact and easy-to-use.
Frequency range: 3MHz to 3GHz.
No battery required.
Use on microwave ovens, mobile phone and cameras.
This detector may be used to:
Detect leaks from electrical items generating an electromagnetic field when in operation.
The frequency range covered by this detector is: 3MHz to 3GHz.
Frequency Range: 3MHz to 3GHz.
Working Temperature: 0C to 40C.
Size: 45 x 100 x 22mm.
Weight: Approx. 38g.
PTDFAIDETMICROLearn MoreFaithfull Multimeter LCD Display EM820DL
This handy Faithfull Multimeter can be used for the measurement of DC / AC voltage, DC current and Resistance and for Diode and Transistor testing and Audible Continuity testing. This meter is ideal for performing many checks used in radio and electronic testing, car electrics, household appliances, portable tools and similar equipment. All test functions are easily accessible by rotating the 20-position range selector switch to the required function. The multimeter has many features to facilitate safe use including overload protection, recessed input terminals, automatic negative polarity and over-range indication. Additional features include a rubber protective housing with integral stand for easy visibility, a large 3 digit LCD backlit display with auto power off and low battery warning.
20-position rotary function and range selector.
Precision reading and stable performance.
Recessed input terminals for added safety.
Supplied with test leads, battery and instruction manual.
Easy to read backlit display panel.
Low battery indication.
Protective rubber housing with integral stand for easy visibility.
9 volt 6F22 Alkaline Battery included.
Display: 3-digit LCD, Max reading 1999.
Measuring method: Dual-slope integration A/D converter.
Operating temperature: 0C - 40C (32F -104F).
Dimensions: 138 x 69 x 31mm.
Weight: approx. 170g (including battery).
PTDFAIDETMULTILearn MoreFaithfull pH Meter 200mm Long Probe ETP300A
This Faithfull pH Meter is easy-to-use and an essential instrument for both the professional and keen gardening enthusiast, providing a quick no fuss method of measuring the pH (acidity and alkalinity) value of soil.
Knowing the pH value is very important and directly influences the health of plants. Using this meter to provide an accurate reading will allow the pH level to be adjusted accordingly to best suit the plants being grown prior to planting. The meter can also be used to help identify the best growing environment and area for growing outdoor plants, shrubs, vegetables and trees and for improving and modifying soil in gardens.
Analogue needle Acid-Alkaline indicator.
Accurate pH soil reading in 60 seconds.
Ideal for fruit and vegetables.
No batteries required.
To change soil pH:
A .To increase the pH value, lime should be added. Lime is a compound of calcium or calcium and magnesium. Applied in the form of ground agricultural limestone, burnt lime or hydrated lime for the quickest result.
B. To decrease the pH value use either aluminium sulphate or sulphur. Aluminium sulphate is the quickest acting as it will increase the acidity as soon as it dissolves into the soil.
Quantities of additives will vary depending on the type of soil. Consult a gardening book or professional gardener if further advice is needed.
PTDFAIDETPHLearn MoreFaithfull Digital Thermometer ETP109
A Faithfull high-precision digital electronic thermometer, for use in both industrial and domestic applications where accurate temperature readings are required. Ideal for use in laboratories for temperature testing and monitoring and essential for use when preparing cooked foods such as meat, poultry, infant milk and many other foods when accurate temperature readings are necessary.
This thermometer can be set for either Celsius or Fahrenheit measurement, maximum or minimum readings and has a useful data hold facility. The easy-clean stainless steel probe features a sharp point with a Slimline design allowing effortless penetration of meats and provides a fast response time when taking readings. The large LCD digital display is easy to read and has an automatic power off function when not in use. The thermometer is supplied in with a probe cover for safe storage when not in use.
Clear easy-to-read LCD display.
Celsius or Fahrenheit readout.
Data hold facility.
Stainless Steel slimline easy clean probe.
1.5V LR44 battery included.
Automatic power off function.
Probe cover for safe storage.
Measuring Range (Probe): Celsius Temperature: -40C to 250C.
Fahrenheit Temperature: -40F to 482F.
Operating Temperature: 0C (32F) to 50C (122F).
PTDFAIDETTHERMLearn MoreFaithfull Voltage Detector Pen 50-1000V AC GK5A
This Faithfull Voltage Detector is a handy instrument that uses a safe, non-contact method to detect AC voltage in outlets, lighting fixtures, circuit breakers, wires and cables and can be used to find circuit breaks in a wire.
A voltage test is easy to carry out by simply holding the detector by its body and placing the white end cap near or onto a cable or fitting believed to be carrying electricity. The detector tip will light up RED if a voltage is present. The tester can be used to detect voltage from 50 to 1,000 VAC. The tester is a convenient pen size with a fixing clip and easily fits into pockets ready for use.
LED detects the presence of AC current.
Locate breaks in power cables and wires.
Non contact testing for complete safety.
Convenient pen size with a pocket clip.
2 x 1.5V AAA Alkaline Batteries included.
Voltage Detection: 50V-1,000V AC
Measurement: CAT II, 1000V
Category: CAT III, 600V
Always test on a known live circuit before use.
This detector is not designed to carry out contact tests on live supplies.
Any other form of test should be carried out by a qualified electrician.
PTDFAIDETVOLTLearn MoreFaithfull Portable Water Leak Alarm (80 dB) EW13
Water leaks can cause serious damage to your home and belongings, proving expensive and time consuming to replace or repair.
This Faithfull portable alarm can be used to protect your house and can be placed anywhere in the home where a water leak presents a potential risk; near to sinks, baths, toilets, washing machines, dishwashers, water heaters, refrigerators, aquariums, tanks, sump pumps and in garages and basements or low areas were water may gather with the potential of causing damage.
A loud 80 decibel alarm will sound when this unit is in contact with water, providing an audible warning that a leak has begun and alerting the homeowner, so that preventative measures can be taken to protect their home and belongings.
Portable and easy to set up and use.
Loud 80 decibel alarm.
No wiring required.
1 x 12V 23A alkaline battery included.
Place the unit in a desired position with its buzzer hole facing upwards, otherwise water may enter into the unit. When a water leak is detected by the sensor, the units alarm will sound.
PTDFAIDETWATERLearn MoreBlack and Decker BDS300 Stud Metal & Live Wire Detector BDS300XJ
The Black & Decker BDS300 Stud Metal & Live Wire Detector for wood, metal pipe and AC live wire detection. Ideal as a precautionary measure prior to drilling. With continuous AC wire warning and visual and audio alerts.
Detection Depth: Wooden Studs: 19mm, Metal Studs: 50mm, Copper Pipes: 25mm, AC Wire: 50mm.
Power: 9V Alkaline Battery (Not supplied).
PTDB/DBDS300XJLearn MoreBlack and Decker BDS303 Automatic 3-in-1 Stud Metal & Live Wire Detector DS303XJ
Black and Decker Wooden stud, metal and AC live wire detector offers the user peace of mind before drilling. Accurately finds centre of wooden stud first time and LCD screen provides clear indication of concealed objects.
Detection Depth: Wooden Studs: 19mm, Metal Studs: 45mm, Copper Pipes: 25mm, AC Wire: 100mm.
Power: 9V Alkaline Battery (Not Supplied).
PTDB/DBDS303XJLearn MoreRidgid DM-100 Micro Digital Multimeter 37423 37423
The Ridgid DM-100 Micro Digital Multimeter is a True RMS and AutoRanging unit, which provides accurate and fast measurements in all applications. It features 11 different electrical functions ranging from AC/DC Voltage and Current (1,000 volt) to temperature measurements.
The multimeter has a double moulded water-resistant (1m) IP67 housing. It is also drop-proof and perfectly suitable for use in the harshest job site conditions. An extra large backlit LCD display provides easy and clear readings.
The DM-100 is rated for industrial use (CAT III-1000V and IV-600V).
Supplied in a soft carrying case with double-moulded test leads, Type K temperature probe and a 9V battery.
Functions and Range:
Voltage AC/DC: 400.0mV - 1,000V.
Current AC/DC: 400.0A - 10A.
Resistance: 400.0 - 40.00M.
Capacitance: 4.000nF - 200.0F.
Frequency: 9.999Hz - 9.999MHz.
Duty Cycle: 0.1% - 99.9%.
Diode Check: 1.5V.
Continuity Test: 150.
Temperature: -20C - 760C.
Power Source: 9V battery (included).
Display: 4000 Count Backlit LCD.
Overload Protection: CAT III and IV1,000V/600V.
Fuses: 0.5A and 10A - 1,000V.
Insulation: Class II, double moulded.
IP Rating: IP-67 water-resistant (1m).
Polarity Indication: Yes, automatic.
Auto Power-Off: Yes, after 15 minutes.
Manual Ranging: Yes.
True RMS: Yes.
PTDRID37423Learn MoreRidgid CM-100 Micro Clamp Meter 37428 37428
The Ridgid CM-100 Micro Clamp Meter is a true RMS and AutoRanging digital clamp meter with a large capacity and measuring range. It can clamp around cables up to 30mm O.D. and measure current up to 1,000A AC/DC.
The clamp meter can also be used as a multimeter for 8 other functions, and will provide clear and accurate readings on its large backlit LCD.
The slim and double-moulded design provides easy one-handed operation and can be conveniently used in confined cable compartments.
Supplied with soft carrying case, test leads, Type K temperature probe and 9V battery.
Functions and Range:
Voltage AC/DC: 400mV - 600V.
Current AC/DC: 40A - 1,000A.
Resistance: 400 - 40M.
Capacitance: 4nF - 40mF.
Frequency: Up to 4kHz.
Diode Test: 1.5V.
Continuity Test: 35.
Temperature: -40 - 1,000C.
Power Source: 9V battery (included).
Display: 4,000 Count backlit LCD.
Clamp size: Max. 30mm O.D. cable.
Overload protection: CAT III 600V.
Polarity Indication: Yes, automatic.
Auto Power-Off. Yes, after 20 minutes.
True RMS: Yes.
Data and Peak Hold: Yes.
Bar Graph Display: Yes.
PTDRID37428Learn MoreRidgid HM-100 Micro Humidity & Temperature Meter 37438 37438
The Ridgid HM-100 Micro Humidity and Temperature Meter is a professional and easy to use device for accurately measuring air humidity and temperature. Both measured values (%RH and C or F) are instantly and simultaneously displayed on the dual backlit LCD.
The HM-100 also automatically calculates the Dew Point and Wet Bulb temperature, while its Capacitance Sensor easily withstands the effects of condensation and high temperatures, making it perfectly suitable for any HVAC environment.
Supplied with a soft carrying case, and 9V battery.
Power Source: 9V battery (supplied).
Measurements: Humidity, temperature, dew point, wet-bulb.
Humidity Range: 0% to 100% RH.
Humidity Accuracy: 2% RH.
Temp. Range: -30C - 100C.
Temp. Accuracy: 0.5C.
Response Time: 30 seconds.
Data Hold: Yes.
Auto Power-Off: Yes, after 15 minutes (can be disabled).
PTDRID37438Learn MoreLaserliner Combifinder Plus - Metal & AC Wall Scanner 080.955A
The Laserliner Combifinder Plus is an electronic device with LCD display for the easy detection of iron/solid bar, copper/water pipes and live electrics within wall structures. It permits targeted scanning for metals, such as reinforcing iron, heating pipes and water pipes. The user guide on the LCD screen makes it accurate and reliable to use.
The CombiFinder Plus has an auto-calibration, which automatically adjusts the device immediately to different surfaces. An acoustic signal sound and visual will signal on locating of objects.
Detection Depth: Iron/Solid Bar 75mm, Copper/Water Pipe 50mm, Live Electric 40mm.
Power: 1 x 9V battery (supplied).
PTDL/L080955ALearn MoreDetectors & Testers
VAT Number: 100 5143 84