Chainsaws

The Black and Decker GKC3630L20 Cordless Chainsaw is powered by a lithium-ion battery for fade free battery power and offers approximately 560 x 3.5cm cuts per battery charge. It has a lightweight design for easy use and manoeuvrability and a tool-free chain tensioning system for quick and easy chain fitting and adjustment.

The chainsaw has improved ergonomics with an optimised balance and comfortable bale handle for greater comfort. It is fitted with a simple, leak-free oil system with automatic chain oiling and a viewing window to minimise spillages when filling.

Supplied with: 1 x 36V 2.0Ah Li-ion Battery.

Specification

Bar Length: 30cm
Chain Speed: 5m/s.
Chain Pitch: 3/8in
Chain Drive Links: 45
Oil Tank Capacity: 110ml
Charging Time: 90 Minutes
Weight: 3.8kg

PTDB/DGKC3630L2

The Black and Decker CS2040 Chainsaw is fitted with a high torque motor that produces a chain speed of 12.5m/s. It has a large cutting capacity of 40cm for large cutting tasks and the low kick back chain provides a smooth, fast cutting action through wet and dry timber. It is quick and easy to fit and adjust new chains thanks to the tool-free chain tensioning system.

The integrated Auto Oil System lubricates the chain, for reduced wear and greater cutting efficiency whilst the Chain Brake System automatically cuts out within 0.15 seconds if the chainsaw kicks back, for added safety.

It is fitted with an Anti-vibration System for greater comfort in use, an easy fill oil system with a viewing window to minimise spillages when filling and a hard steel spiked bumper improves stability for controlled cutting.

Specification

Input Power: 2,000W.
Chain Speed: 12.5m/s.
Bar Length: 40cm.
Chain Pitch: 3/8 inch.
Chain Drive Links: 57.
Oil Tank Capacity: 200ml.
Weight: 5.5kg.

PTDB/DCS2040

The Black and Decker CS2245 Chainsaw is fitted with a high torque motor that produces a chain speed of 12.5m/s. It has a large cutting capacity of 45cm for large cutting tasks and the low kick back chain provides a smooth, fast cutting action through wet and dry timber. It is quick and easy to fit and adjust new chains thanks to the tool-free chain tensioning system.

The integrated Auto Oil System lubricates the chain, for reduced wear and greater cutting efficiency whilst the Chain Brake System automatically cuts out within 0.15 seconds if the chainsaw kicks back, for added safety.

It is fitted with an Anti-vibration System for greater comfort in use, an easy fill oil system with a viewing window to minimise spillages when filling and a hard steel spiked bumper improves stability for controlled cutting.

Specification

Input Power: 2,200W.
Chain Speed: 12.5m/s.
Bar Length: 45cm.
Chain Pitch: 3/8in.
Chain Drive Links: 62.
Oil Tank Capacity: 150ml.
Weight: 5.6kg.

PTDB/DCS2245

The Black and Decker PS7525 Corded Pole Saw has a pivoting head that maximises access and ease of cutting in the most difficult to reach places. The integrated auto oil system lubricates the chain, for reduced wear and greater cutting efficiency and the large oil tank has a viewing window to minimise spillages when filling.

The saw can be extended up to 2.7m in length to easily trim hard to reach, overhead branches and has a large cutting capacity, up to 25cm of cutting width. The low kick back chain provides smooth, fast cutting through wet and dry timber and the chain brake system automatically cuts out within 0.15 seconds if the chainsaw kicks back, for added safety.

Specification

Input Power: 800W.
Chain Speed: 11m/s.
Bar Length: 25cm.
Chain Pitch: 3/8in.
Chain Drive Links: 40.
Oil Tank Capacity: 60ml.
Weight: 3.8kg.

PTDB/DPS7525

The Makita EA3201S35B is a petrol driven chainsaw with a 35cm cutting blade and a 32cc environmentally friendly 2-Stroke engine with Catalytic muffler to comply with all current exhaust emission regulations. It has an on/off choke combination switch with automatic half throttle lock, intelligent ignition coil which controls stable idling, increases output power at practical RPM range with engine overrun protection.

The accumulated electric energy charge system allows easier re-starting a rapid start pull force required to start the machine is drastically reduced with spring-assisted recoil starter. It has a tool less tension system for adjustment of saw chain.

The adjustable oil pump and fleece air filter allow for a higher resistance to dust ingress. The touch and stop switch; a light touch on the switch stops the engine, and the switch returns automatically to the start position, eliminating flooding of the carburettor.

Specification

Input Power: 2-Stroke Petrol Engine 32cc 1.0hp.
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in.
Bar Size: 35cm.
Fuel Tank Capacity: 400ml.
Chain Oil Capacity: 280ml.
Weight: 4.1kg.

PTDMAKEA3201S35

The Makita EA3500S35B Petrol Chainsaw has an easy-start function and features the M2M vibration dampening system. It has an environmentally friendly 2-stroke engine with catalytic muffler to comply with well known exhaust emission regulations.

It comes supplied with a universal wrench bar, chain, chain cover, Torx wrench, tool kit, hex wrench and carburetor screwdriver.

Specification

Input Power: 2-Stroke Petrol Engine 32cc 1.7 kW/2.3 PS.
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in.
Bar Size: 35cm.
Fuel Tank Capacity: 400ml.
Chain Oil Capacity: 290ml.
Weight: 4.4kg.

All vibration figures quoted are Tri-axial to EN60745 2006.

Noise Sound Pressure: 101.8 dB(A).
Noise Sound Power: 111.8 dB(A).
Noise K Factor: 2.5 dB(A).

Vibration K Factor: 2 m/sec
Vibration: Right Handle (Rear grip): 5.0m/sec, Left Handle (Front grip): 4.9m/sec.

PTDMAKEA3500S35

The Black and Decker GK 1000 Alligator Powered Lopper is a revolutionary new cutting tool with the cutting performance of a chainsaw but in an easy to use and much less intimidating form.

The patented jaws protect the user from the moving cutting chain, whilst the easy oil facility, powerful motor and lopper style dual switch handles make this product intuitive in use. It has a large cutting capacity that makes light work of small branches up to 4 inch (100mm).

Specification

Input Power: 550W.
Max. Material Thickness: 100mm.
Bar Length: 10cm.
Pitch: 1/4in.
Weight: 3kg.

PTDB/DGK1000

The Einhell GH-EC 2040 Electric Chainsaw provides excellent performance and perfect robust machining. It has ergonomic handle positioning and an optimised centre of gravity distribution for reduced fatigue and safe sawing. The chain is easy to tension and to change without the need for tools.

The chainsaw is made from high quality components, including an Oregon bar and chain and metal gearing for a long life. For safety, the chainsaw has kickback protection with a mechanical instant chain brake.

Specification

Input Power: 2,000W.
Chain Speed: 13.5m/s.
Bar Length: 40.6cm.
Cutting Length: 37.5cm.
Oil Tank Volume: 160ml.
Weight 5.45kg.

PTDEINGHEC2040

The Makita EA3500S40B Petrol Easy Start Chainsaw has an environment-friendly 2-stroke engine with catalytic muffler to comply with well known exhaust emission regulations and has a compact and lightweight body for better handling.

It offers a rapid start with an on-off choke combination switch and automatic half throttle lock. For added safety the chainsaw has a touch and stop switch.

Specification

Input Power: 2-Stroke Petrol Engine 35cc
Horsepower: 2.28 hp
Chain Speed: 14.5m/sec.
Chain Gauge: 0.050in, Pitch: 3/8in
Bar Size: 40cm
Fuel Tank Capacity: 400ml
Chain Oil Capacity: 290ml
Weight: 5.3kg

PTDMAKEA3500S40

The Einhell GC-PC 1335 TC Petrol Chainsaw is ideal for sawing firewood, for thinning out scrub, for removing branches and for cutting down trees. In idle mode, the centrifugal clutch disengages the chain from the engine. The crank shaft has bilateral bearings, so the engine runs with very low vibrations. Thanks to the integrated choke and primer, the engine always starts without difficulty.

Its anti-vibration handle cushions shocks and reduces user fatigue. Fitted with a quality rail and chain from OREGON to ensure optimum cutting performance. The chain can be tensioned and changed without tools. For added safety pressure on the finger guard will trigger the chain brake and stop the chain within a few milliseconds. Also in the event of the chain jumping off the rail, there is a chain catch.

Supplied with: 1 x Petrol/Oil Mixing Bottle and 1 x Cutter Guard.

Specification

Input Power: 41cc Petrol.
Power: 1.74hp (1.3kW).
Fuel Tank Capacity: 0.26 litre.
Oil Tank Capacity: 0.21 litre.
Bar Length: 35cm.
Cutting Length: 33.5cm.
Chain Speed: 21 m/s.
Weight: 5.5kg.

PTDEINGCPC1335T

The DEWALT DCM575 XR FlexVolt Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool-free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting.

The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain.

DCM575X1: 1 x 18/54V 9.0/3.0Ah Li-ion Battery.
DCM575N: Bare Unit, No Battery or Charger.

Specification

Bar Length: 40cm.
Chain Speed: 15m/s.
Oil Tank Capacity: 110-120ml.
Weight: 5.68kg.

The DEWALT DCM575X1 XR FlexVolt Chainsaw is supplied with:

1 x 18/54V 9.0/3.0Ah Li-ion Battery
1 x 8 Amp Li-ion Charger

DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the worlds first convertible 18/54V batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18V products and offering increased runtime.

PTDDEWDCM575X1

The DEWALT DCM575 XR FlexVolt Chainsaw has a high efficiency brushless motor with automatic oiling for reduced maintenance. The tool-free bar fitment and chain tensioning provides fast and easy chain adjustments. Uses a variable speed trigger so there is no pull starting and improved control during cutting.

The extensive over-mould provides extra grip and comfort in prolonged use. Fitted with a 40cm Oregon bar and chain.

DCM575X1: 1 x 18/54V 9.0/3.0Ah Li-ion Battery.
DCM575N: Bare Unit, No Battery or Charger.

Specification

Bar Length: 40cm.
Chain Speed: 15m/s.
Oil Tank Capacity: 110-120ml.
Weight: 5.68kg.

PTDGRPDEWDCM575X1

The HiKOKI CS3630DA Cordless Top Handle Chainsaw is fitted with a powerful brushless motor for extended run time. It has a lightweight, compact design with soft grip handles. The secondary handle provides increased control. The oil tank features a back light making it easy to check the oil level. The chain can be tensioned and changed without tools. Fitted with a mechanical kick-back brake for added safety, and a storage hook.

CS3630DA/JLZ: 1 x 18/36V 5.0/2.5Ah Li-ion Battery
CS3630DA/J4Z: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 8.3m/s.
Blade Pitch: 9.52mm
Guide Bar Length: 300mm
Guide Bar Type: Sprocket Nose
Overall Length: 599mm
Weight inc. Battery: 3.6kg

PTDGRPHIKCS3630DAL

The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder.

The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up.

DCMPS567P1: 1 x 18V 5.0Ah Li-ion Battery
DCMPS567N: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 6.5 m/s
Bar Length: 20cm
Oil Tank Capacity: 115ml
Weight: 3.8kg

The DEWALT DCMPS567N XR Brushless Pole Saw is supplied as a Bare Unit, No Battery or Charger supplied.

PTDDEWDCMPS567N

The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder.

The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up.

DCMPS567P1: 1 x 18V 5.0Ah Li-ion Battery
DCMPS567N: Bare Unit, No Battery or Charger

Specification:

Chain Speed: 6.5 m/s
Bar Length: 20cm
Oil Tank Capacity: 115ml
Weight: 3.8kg

The DEWALT DCMPS567P1 XR Brushless Pole Saw is supplied with:

1 x 18V 5.0Ah Li-ion Battery
1 x 20cm Bar and Chain
1 x XR Multi-Voltage Charger

PTDDEWDCMPS567P