Forge Door Bolt - Aluminium 100mm (4in) DBLTAL4
(Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly.)
This Forge internal Door Bolt is used for securing doors or cupboards.
Made from aluminium and supplied with fitting instructions and all fixings.
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a 2mm drillbit and fasten in place using supplied screws.
3. If being installed on an inward opening door:- Position the bolt keep onto the door frame, and ensure that the bolt moves freely through the hole. it may be necessary to remove part of the frame with a chisel.
Size: 100mm (4 inch).
|Manufacturers Part Number||DBLTAL4|
|Package Height (cm)||19|
|Package Width (cm)||9.5|
|Package Length (cm)||1|
|Bullet 1||Door bolt|
|Bullet 2||For internal use|
|Bullet 3||Ideal for securing doors or cupboards|
|Bullet 4||Made from aluminium|
|Bullet 5||Supplied with fixings|