Everbuild STICK2 All-Purpose Adhesive Tube 30ml S2CLEAR
(Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly.)
Everbuild STICK2 All-Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of household repairs and hobby uses. Will stick ceramics, porcelain, pottery, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics to both themselves and each other.
Always open and use this product over a protected work surface.
Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas. Do not breathe vapour.
POROUS SURFACES (fabrics, ceramics etc.) Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly.
NON-POROUS SURFACES (plastics, metals etc.) Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.
In both cases, full strength is obtained after 24 hours at 20C
Replace cap immediately after use to keep adhesive usable.
|Manufacturers Part Number||S2CLEAR|
|Ebay Category ID||131625|
|Package Height (cm)||20.2|
|Package Width (cm)||11.4|
|Package Length (cm)||2.5|
|Bullet 1||Proven reliable Everbuild technology|
|Bullet 2||Lightweight construction at just 0.05 Kgs|
|Bullet 3||High performace for the home or tradesman|